• 대한의용생체공학회:의공학회지
• /
• 제29권6호
• /
• pp.451-456
• /
• 2008

Total knee arthroplasty(TKA) using computer-assisted navigation has been increased in order to improve the accuracy of femoral and tibial components implantation. Recently, a few clinical studies have reported on the femoral stress fracture after TKA using computer-assisted navigation. The purpose of this study is to investigate the stress concentration around the femoral pin-hole for different pin-hole diameter, the modes of pin penetration by finite element analysis to understand the effects of pin-hole parameters on femoral stress fracture risk. A three-dimensional finite element model of a male femur was reconstructed from 1 mm thick computed tomography(CT) images. The bone was rigidly fixed to a 25 mm above the distal end and 1500 N of axial compressive force and 12 Nm of axial torsion were applied at the femoral head. For all cases, transcortical pin penetration mode showed the highest stress fracture risk and unicortical pin penetration mode showed the lowest stress concentration. Pin-hole diameter increased the stress concentration, but pin number did not increase the stress dramatically. The results of this study provided a biomechanical guideline for pin-hole fracture risk of the computer navigated TKA.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권3호
• /
• pp.228-238
• /
• 2005

Purpose: Several cryoprotectants are in use to help the survival of cells during cryopreservation of bone in maxillofacial region. Among them, $Me_2SO$(dimethyl sulfoxide), EG(ethylene glycol), sucrose were used for experimentally created defects with accompanying cryopreserved bone graft in the rabbit model. The aim of this study is to analyze the effect of above mentioned agents on bone formation using histologic and histomorphometrical methods, thus to provide experimental support for clinical application of these agents. Materials and methods: Nine rabbits were used as experimental animals. Surgical defects were created on the distal femoral heads and mesial tibial heads of each animal using trephine drill(5mm diameter and 5mm length). The harvested bones were cryopreserved in $-80^{\circ}C$ refrigerator for one week. The defects were filled with cryopreserved bone with cryoprotectants as experimental groups and cryopreserved bone without cryoprotectant as control. Then, the animals were sacrificed at 1, 2, and 3 weeks after surgery. With Goldner's modified Masson trichrome staining and semiautomatic image analysis system, we observed the change of the cells and bone formation. Results: After bone graft, bone formation and active remodeling process were examined in all experimental groups and the control. But the intensity of such activities of the control were somewhat weaker than that of the experiments. Especially $Me_2SO$+sucrose group was the best in bone formation and bone remodeling. $Me_2SO$ group was more than that of EG group in bone fomation. Sucrose seems to be helpful in survival of the bone cell. Histologic findings showed superior bony quantity and quality in experimental groups than that in control. Conclusions: The data from this study provides the basis for future studies for evaluating the effect of cryoprotectants in the cryopreservation of bone and clinical study for predictable use of these agents.

• 대한의용생체공학회:의공학회지
• /
• 제44권2호
• /
• pp.139-146
• /
• 2023

Osteoporosis is a disease in which the risk of bone fractures increases due to a decrease in bone density caused by aging. Osteoporosis is diagnosed by measuring bone density in the total hip, femoral neck, and lumbar spine. To accurately measure bone density in the lumbar spine, the vertebral region must be segmented from the lumbar X-ray image. Deep learning-based automatic spinal segmentation methods can provide fast and precise information about the vertebral region. In this study, we used 695 lumbar spine images as training and test datasets for a deep learning segmentation model. We proposed a lumbar automatic segmentation model, CM-Net, which combines the center point of the spine and the modified U-Net network. As a result, the average Dice Similarity Coefficient(DSC) was 0.974, precision was 0.916, recall was 0.906, accuracy was 0.998, and Area under the Precision-Recall Curve (AUPRC) was 0.912. This study demonstrates a high-performance automatic segmentation model for lumbar X-ray images, which overcomes noise such as spinal fractures and implants. Furthermore, we can perform accurate measurement of bone density on lumbar X-ray images using an automatic segmentation methodology for the spine, which can prevent the risk of compression fractures at an early stage and improve the accuracy and efficiency of osteoporosis diagnosis.

• Advances in Traditional Medicine
• /
• 제6권2호
• /
• pp.79-85
• /
• 2006

In order to study the effect of acupuncture stimulation on bone mineral density (BMD), using the ovariectomized (OVX) rat model, we assessed the degree of osteopenia by dual-energy X-ray absorptiometry, measured the level of locomotor activity using a metabolism measuring system, and performed histological studies of bone tissue. Twenty-four female Wistar rats (8 weeks old, 160 - 180 g)were divided into three groups. Rats in the OVX-A group underwent ovariectomy followed by acupuncture stimulation. The OVX rats in the Vehicle control group were not treated with acupuncture as a control. The rats in the control group received neither ovariectomy nor acupuncture. Acupuncture stimulation for 12 weeks in the OVX-A group inhibited the reduction in BMD of the femoral bones caused by ovariectomy. Moreover, in the two OVX groups, there was no clear difference in the level of locomotor activity between the active and resting phases prior to acupuncture stimulation in each rat, and the pattern of locomotor activity was irregular. After acupuncture stimulation of the OVX-A rats, the pattern of locomotor activity became diphasic with clear active and resting phases, as was observed in the Control group. On histological studies, the continuity of trabecular bone was maintained more favorably and bone mass was higher in the OVX-A group than in the vehicle control group. These results suggest that the increased locomotor activity that had been induced by acupuncture stimulation increased the BMD.

• Journal of Acupuncture Research
• /
• 제35권1호
• /
• pp.21-27
• /
• 2018

Background: Examination of the effects of deer antler, old antler, and antler glue on postmenopausal osteoporosis in an ovariectomized Sprague-Dawley rat model. Methods: The study involved 7 experimental groups; SHAM (sham-operated rats), OVX (ovariectomized rats), E2 (ovariectomized rats with estradiol $10{\mu}g/kg$ daily, orally), DA (ovariectomized rats with deer antler extract 5.83 mg/kg), OA (ovariectomized rats with old antler extract 3.8 mg/kg), low-AG (ovariectomized rats with low dose of antler glue powder 12.5 mg/kg), high-AG (ovariectomized rats with high dose of antler glue powder 37.5 mg/kg). After 6 weeks of treatment, body weight, blood calcium, phosphorus, estradiol, liver [alkaline phosphatase (ALP), aspartate transaminase (AST), alanine transaminase (ALT)] and kidney [blood urea nitrogen (BUN)/creatinine ratio] function, and femoral bone mineral density (BMD) were measured. Results: The body weights of DA, OA, low-AG, and high-AG groups did not significantly differ from OVX group. Blood estradiol levels were significantly increased in the DA, low-AG, and high-AG groups compared to the OVX group. Blood calcium, phosphorus, ALP, AST, and ALT levels and BUN/creatinine ratio did not show significant changes in the DA, OA, low-AG, and high-AG groups. BMDs of the femur, and femoral head and neck were significantly increased in the low-AG group. In the OA group, the BMD of the femoral head and neck was significantly increased. Conclusion: Treatment with deer antler, or antler glue for 6 weeks was effective for increasing estradiol and femoral BMD in ovariectomized rats, suggesting that this may be of therapeutic benefit for osteoporosis.

• 대한한의학회지
• /
• 제39권4호
• /
• pp.86-113
• /
• 2018

Objectives: We examined the effects of a mixed formula consisting of dried pomegranate concentrate powder (PCP) and the aqueous extracts of Eucommiae cortex (EC) and Achyranthis radix (AR) in rats with surgically induced osteoarthritis (OA). Methods: Two weeks after OA-inducing surgery, a PCP:EC:AR 5:4:1 (g/g) combination or single formula was orally administered. Changes in body weight, knee thickness, maximum knee extension angle, bone mineral density of the knee joints, femoral and tibial articular surfaces, and compressive strength of the femoral and tibial articular cartilage (AC) were assessed, along with the prostaglandin E2 level, 5-lipoxygenase, matrix metalloproteinase (MMP)-2 and MMP-9 activity, and chondrogenic gene mRNA expression in the femoral and tibial AC with the synovial membrane (SM). In addition, the number of cleaved poly(ADP-ribose) polymerase, cyclooxygenase and tumor necrosis factor-${\alpha}$-immunoreactive cells in the femoral and tibial AC with SM were monitored, and the rate of cell proliferation was determined with a 5-bromo-2'-deoxyuridine uptake assay. Results : The signs of surgically induced OA in rats were significantly inhibited by both PCP, EC and AR combined and single formulas. In particular, the combination formula-treated OA model rats showed dose-dependent, significantly increased inhibitory activity against all tested criteria compared with single formula-treated rats. Conclusions: Taken together, our results suggest that the combination formula synergistically increased the anti-OA effects of its components through anti-inflammatory and chondrogenic activity in rats with surgically induced OA. In addition, 200, 100 and 50 mg/kg combination formula treatments showed dose-dependent inhibitory activity against all of the tested criteria.

• 대한의용생체공학회:의공학회지
• /
• 제24권5호
• /
• pp.401-410
• /
• 2003

본 연구에서는 유한요소법을 이용하여 대퇴골 전자간 골절 치료에 대한 다양한 수술기법을 골밀도 변화에 따라 생체역학적으로 분석하여 이를 평가하고자 한다. 이에 구현된 모델들은 압박 고관절 나사만을 이용하여 시술한 모델 (Type I), 삽입된 압박 고관절 나사 주위에 시멘트 영역을 확보한 뒤 골 시멘트로 보강하는 시술을 구현한 모델 (Type II),대학교추가의 골소실이 없이 시멘트를 가압하여 주입하는 시술을 구현한 모델 (TypeIII)의 3가지 형태로 구현하였다. 시술 상황에 따라 골절부위와 삽입물의 경계면 주위에 접촉요소를 사용하기 위해 적절한 마찰계수를 설정하였으며, 골다공증 정도 (Singh Indices, II∼V)에 따라 대퇴골의 물성치를 적절하게 적용시켰다. 각 모델에 있어 골밀도 변화에 따른 수술기법의 차이를 분석하기 위하여 다음과 같은 인자를 분석하였다 : (a) 대퇴골두 내에서의 von Mises 응력 부피비, (b) 대퇴골두 망상골과 인공 삽입물내에서의 최대 von Mises 응력 (PVMS), (c) 대퇴골두 내에서의 최대 von Mises 변형률 (MVMS), (d) 골절 부위와 인공 삽입물 주위에서의 미세운동량. 수술기법 중 Type III가 대퇴골두 내에서 골밀도 변화에 상관없이 가장 낮은 PVMS, MVMS 수치를 보여 가장 효율적인 결과를 나타내었다. 이는 기존 시술법 (Type I,II)에 비해 내고정 실패 가능성이 가장 적을 것으로 예측되었다. 특히, 골밀도가 낮을 때에는 Type III의 수술 효과가 더욱 커지는 것으로 나타났다. 또한, 삽입물 주위에서 미세운동량을 분석한 결과, Type III의 수치가 다른 시술법들의 15∼20%로 나타나 시멘트를 가 압하여 보강하는 시술법이 삽입물 주위의 미세운동을 억제하는데 있어 가장 효과적이다는 것을 증명하는 것이다. 이러한 결과로부터, 압박 고관절 나사를 이용한 대퇴골두 전자간 골절 치료에 있어 골 시멘트를 가압하여 보강하는 방법이 골밀도가 낮은 환자에 있어 인공삽입물의 내고정 및 골유합에 가장 큰 효과를 보일 것으로 사료된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.951-955
• /
• 2001

The experimental comparison between bonded and unbonded types stem-cement interface was carried out on axisymmetric stem-cement-aluminum model of the femoral component of a total hip replacement. Human femur was modeled in non-tapered and tapered($7.5^{\circ}$) aluminum hollow cylinders to emulate the diaphyseal and metaphyseal segments of the femur. For unbonded type, we tested stems with three different taper angles($5^{\circ},\;7.5^{\circ},\;10^{\circ}$). In every case, the cement-aluminum interface was designed to endure 8MPa shear strength. (a measured value at cement-bone interface) We tested aluminum models under axial loading for both cases. As an experimental result, it was found that unbonded stem sustained more axial load as bonded stem in both cases, diaphyseal and metaphyseal models. The unbonded types failed in cement mantle under axial compressive load, while the bonded ones failed in shear at cement-aluminum interface. These results suggest that a polished stem will sustain much higher axial load than a roughened stem. And a polished stem will make more stable cement-bone interface that may promote better osteosythesis around the stem.

• Molecules and Cells
• /
• 제23권2호
• /
• pp.246-251
• /
• 2007

Osteoporosis is a common metabolic bone disease characterized by low bone mineral density (BMD) with an increased risk of fracture. Low bone mass results from an imbalance between bone formation by osteoblasts and bone resorption by osteoclasts. Microphthalmia-associated transcription factor (MITF) plays a critical role in osteoclast development and thus is an important candidate gene affecting bone turnover and BMD. In order to investigate the genetic effects of MITF variations on osteoporosis, we directly sequenced the MITF gene in 24 Koreans, and identified fifteen sequence variants. Two polymorphisms (+227719C > T and +228953A > G) were selected based on their allele frequencies, and then genotyped in a larger number of postmenopausal women (n = 560). Areal BMD ($g/cm^2$) of the anterior-posterior lumbar spine and the non-dominant proximal femur was measured by dual-energy X-ray absorptiometry. We found that the MITF + 227719C > T polymorphism was significantly associated with low BMD of the trochanter (p = 0.005-0.006) and total femur (p = 0.02-0.03) (codominant and dominant models), while there was no association with BMD of the lumbar spine. The MITF+228953A > G polymorphism was also associated with low BMD of the femoral shaft (p = 0.05) in the recessive model. Haplotype analysis showed that haplotype 3 of the MITF gene (MITF-ht3) was associated with low BMD of the trochanter (p = 0.03-0.05) and total femur (p = 0.05) (dominant and codominant models). Our results suggest that MITF variants may play a role in the decreased BMD of the proximal femur in postmenopausal women.

• Advances in nano research
• /
• 제12권3호
• /
• pp.301-317
• /
• 2022

Many studies have shown that Mg-Nd-Zn-Zr (abbreviated as JDBM) alloy has good biocompatibility and biodegradability as well as promotion of cell adhesion, proliferation and differentiation, and Wnt/β-catenin signaling pathway may play a unique role in joint tissue by controlling the function of chondrocytes, osteoblasts and synoviocytes. However, it is not clear whether the JDBM alloy induces osteochondral repair through Wnt/β-catenin signaling pathway. This study aims to verify that JDBM alloy can repair osteochondral defects in rats, which is realized by Wnt/β-catenin signaling pathway. In this study, the osteochondral defect model of the right femoral condyle non-weight-bearing area in rats was established and randomly divided into three groups: Control group, JDBM alloy implantation group and JDBM alloy implantation combined with signaling pathway inhibitor drug ICRT3 injection. It was found that after JDBM alloy implantation, the bone volume fraction (BVF) became larger, the bone trabeculae were increased, the relative expression of osteogenesis gene Runx2, Bmp2, Opn, Ocn and chondrogenesis gene Collagen II, Aggrecan were increased, and the tissue repair was obvious by HE and Masson staining, which could be inhibited by ICRT3.