• Journal of Conservation Science
• /
• v.38 no.2
• /
• pp.87-95
• /
• 2022

This aimed to species identification and tree-ring dating of wooden elements used in the Myeongjeong-gate of the Changgyeong-palace, Seoul, Korea. Of the 79 wooden elements evaluated, 78 were confirmed to be hard pines and one belonged to Abies spp.. Cores of the wooden elements were collected using a drill for tree-ring dating, and ring-width plots of individual samples were constructed using the TSAP software. The tree-ring dating results for the outermost ring of 58 hard pine wooden elements revealed the following felling dates: early spring of 1604-late fall of 1615, late fall of 1706-early spring of 1707, and late fall of 1828-late fall of 1834. The obtained felling dates of the 1600s and 1800s were found to be consistent with those in the construction and repair records of the Annals of Joseon Dynasty, Gwanghaegun's Diary and Changgyeonggung Yeonggeondogam Uigwe. However, the obtained felling dates of the 1700s were not consistent with those in the construction and repair records. Therefore, additional confirmation of repairs that were not included in the records was possible using tree-ring dating.

• Communications for Statistical Applications and Methods
• /
• v.8 no.3
• /
• pp.739-751
• /
• 2001

In this paper, a sample design is studied for 2000 forestry management survey of five types forestry , tree felling, gathering of pine mushroom, growing of nut trees, growing of wild flowers, and lumbering industry. We introduce population stratification and a modified stratified cut-off sampling which deal with determination of sample size, sample allocation, and estimation of total and variance of estimator. Substitution of sample units and imputation of nonresponse units are discussed for reducing the nonsampling errors.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.271-274
• /
• 2002

This paper presents tile efficient polling architecture for simple network management protocol (SNMP). Now a day, tile internet traffics have been increasing rapidly within a few years as the subscriber's network to connect internet is provided commonly. With this trend, the network management traffics also make the same phases. To provide numerous higher Quality services to the customers, the management traffic must be controlled within the permitted limit. This paper proposes the policy-based felling architecture for SNMP MIB with several parameters and suggests the data collecting layer architecture for the efficient polling.

• Journal of the Korean Ceramic Society
• /
• v.21 no.2
• /
• pp.127-134
• /
• 1984

Basic research on the formation of monolithic glasses from metal alkoxide has been done concerning gelling of silicon alkoxides and dehydration of those gells. The felling time were increased with increasing of Carbon number of alkyl radical of alkoxide and am-ount of water and the lower pH value of water. Large portions of water and organic materials were rem-oved below 25$0^{\circ}C$ and shrinkage of glass took place above 80$0^{\circ}C$ Therefore heating up to 25$0^{\circ}C$ and above 75$0^{\circ}C$ must be done gradually with rate of 0.5$^{\circ}C$/min.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.326-332
• /
• 2020

The this study's objective was to conduct species identification and tree-ring dating for the wood elements of Daewoong-jeon(main temple), Hwagye-temple, Seoul, Korea. Most of the wood elements were made from Pinus spp.(hard pine). However, one large beam was constructed from Abies spp.. For the tree-ring dating, cores were taken from the elements using a drill, and ring-width plots of individual samples were produced with the TSAP software program. The tree-ring dating results showed that, the date of the outermost ring of most elements (20 elements), including beams and pillars, were from AD 1839 to 1870. Among them, five elements had bark, and felling dates were AD 1868 and 1869. These dates confirmed the historical records that Daewoongjeon was rebuilt in AD 1870 from the records of hidden materials(Bokjangmul) in Jongdori by the survey 2012.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.2
• /
• pp.152-163
• /
• 1990

The purpose of this study is to experimentally analyze the relationship between structural characteristics of cotton fabrics and their cool-and-warm felling in order to develop more comfortable fabrics. Comfort in textile products has been emphasized as consumers preferred performance to fashion of clothing. Thermal comfort of clothing is a basic parameter of the comfort sensation which is usually represented by the cool-and-warm feeling felt by human skin. Cloo-and-warm feeling is perceived by the heat flux which transfers heat energy stored in an object to skin. We feel warm (cool) if the temperature of nerve extremity in skin ascends (descends). As cool-and-warm feeling determines the comfort sensation of clothing, it is important to develop new comfort fabrics. Although considerable works have been made on the body, clothing, and environment, there has been no research study on the structural characteristics of fabrics and their cool and warm feeling. Cool-and-warm feeling is closely related to the transient heat transfer property. This research study used the cotton fabrics manufactured in Korea as sample and measured $q_{max}$ value with thermal property measuring instrument (Thermo-Labo II type). $q_{max}$ values estimated by polynomial regression equation were compared with those observed in this study. This study also identified the structural parameters of cotton fabrics for a specific range of $q_{max}$ values. The findings of this study can be summarized as follows: 1) As the thickness, porosity and air permeability of cotton fabrics increase, $q_{max}$ value decreases. 2) As the fabric count and over factor of cotton fabrics increase, $q_{max}$ value also increases. 3) $q_{max}$ values have been estimated by simple and polynomial regression equations developed in this study. Regression curves which have been plotted by polynomial regression equations also provided with the range of structural parameters for a specific range of $q_{max}$ values of cotton fabrics. This study would be significant in that it has identified the structural Parameters for the cool-and-warm feeling of cotton fabric at $65\%$ relative humidity.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.4
• /
• pp.258-264
• /
• 2005

The objectives of this study were to study 1) emergence of pine bark beetles, 2) larval density in residual timber on Idlest land by each felling season, and 3) the secondary damage rates in the tended forest. Pine forest land which had undergone tending had a higher secondary damage ratio $(59.6\%)$ by pine bark beetles than forest land that was not tended $(2.8\%)$. The number of escape holes averaged 11.3 0.31 per $250 cm^2$ on the bark of leaf trees in the tended forest. The number of escape holes was higher in the Jinju site than in the Hamyang site. The larval habitat density of pine bark beetles as compared with each felling period was higher after mid-October than in forests tended early in October. Thus, forests should be tended before early October in order to prevent secondary damage from pine bark beetles. Secondary damage in the tended forest was higher in the upper part $(75.5\%)$ of the tree crown than in the lower part $(49.2\%)$. The damage was higher in terminal shoots $(80\%)$ than in lateral shoots $(48\%)$. Therefore, secondary damage by pine bark beetles can cause deterioration of the elongation growth of the forest trees. In conclusion, if by-products of tended pine forest forests are neglected, they will be utilized as a propagation site for pine bark beetles (Blastophagus piniperda L). The propagated adults will damage the tender shoots of the leaf trees and thus seriously limittheir elongation.

• Journal of Korean Society of Forest Science
• /
• v.7 no.1
• /
• pp.40-44
• /
• 1968

1. The larvae of the pine gall-midge begin to grow slowly from early July but grow rapidly from September. 2. The number of larvae in the galls does not decrease during the feeding period. 3. Pine needles infested by pine gall-midge cease to grow as soon as the gall starts to form. 4. In Seoul district the effective felling season of the pine trees for the Control of the pine gall-midge seems to be around 20th September when the size of larvae reaches 1.4-1.5mm in length. 5. The stratification and direction of the Crown, and the length of new shoot had no effect on the degree of infestation by pine gall-midge. However the degree of infestation differed among the trees of different ages as well as at the different levels of the mountain.

• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.396-408
• /
• 1996

The purposes of this study were to standardise the forest working system to design the intensity of working system in felling operation of the thinning forest in our country as well as to contrive the improvement of working method and the increase of productivity. For the purpose of investigating these, element working was classified by felling operation in softwood thinning forest, and a pulse rate were measured and analyzed. The results were as follow : 1. From the analysis of the pulse frequence measurment, the average pulse showed 108 pulse per minute for worker A in the total of pure working time, 130 pulse per minutes for worker B, 119 pulse per minute for worker C and 125 pulse per minute for worker D, respectively. 2. From the results of the pulse frequence analysis according to element working classification, the highest pulse frequence represented 115 pulse per minute for worker A in the circumference, 131 pulse per minute for worker B in the movement, 122 pulse per minute for worker C in the limbing operation and 128 pulse per minute for work D in hang-up. 3. If the original pulse frequence was 100% for workers, the working intensity showed as follow : worker A was 160%(original pulse frequence was 61=100%) for the total of the working intensity and 188% for the circumference among element working. Worker B was 220%(original pulse frequence was 57=100%) for the total of the working intensity and 229 for movement among element working. Worker C was 159%(original pulse frequence was 73=100%) for the total of the working intensity and 168% for limbing operation among the element working. Worker D was 156%(original pulse frequence was 70=100%) for the total of working intensity and 182% for hang-up among element working. 4. At the limit point of Labor performance rating, showing the total of working intensity, overtime pulse rate per minute was 30 for worker A, 207 for worker B, 14 for worker C and 67 for worker D. Worker B was highest in working intensity, and got physically a big load.

• Journal of Korean Society of Forest Science
• /
• v.101 no.3
• /
• pp.344-355
• /
• 2012

This study was conducted to analyze on the operational time and productivities of logging operations in whole-tree logging operation system by tower-yarder and swing-yarder, and in cut-to-length logging operation system by excavator with grapple in order to establish the efficient logging operation system and to spread logging operation technique. In the analysis of operational time, in case of whole-tree logging operation system, the felling time was 46.6 sec/cycle by chain saw, the yarding time was 480.6 sec/cycle by tower-yarder, the yarding time was 287.4 sec/cycle by swing-yarder and the bucking time was 155.14 sec/cycle by chain saw. In case of the cut-to-length logging operation system, the felling and bucking time was 225.65 sec/cycle by chain saw, the cut-to-length extraction time was 4,972 sec/cycle by excavator with grapple, the branches and leaves extraction time was 3,143 sec/cycle by excavator with grapple. The forwarding time was 4,688 sec/cycle by wheel type mini-forwarder, the forwarding time was 2,118 sec/cycle by excavator with grapple and small forwarding vehicle. In the analysis of operational productivities, in case of whole-tree logging operation system, the average felling performance was $57.89m^3/day$ by chain saw, the average yarding performance was $20.3m^3/day$ by tower-yarder, $31.55m^3/day$ by swing-yarder respectively, the average bucking performance was $20.3m^3/day$ by chain saw. In case of the cut-to-length logging operation system, the average felling and bucking performance was $11.96m^3/day$ by chain saw, the average cut-to-length extraction performance was $34.75m^3/day$ by excavator with grapple, the average branches and leaves extraction performance was $37.66m^3/day$ by excavator with grapple, the average length of operation road construction was 73.8 m/day by excavator with grapple. The average forwarding performance by wheel type mini-forwarder and the average forwarding performance by excavator with grapple and small forwarding vehicle was $15.73m^3/day$ and $65.03m^3/day$, respectively.