• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.214-222
• /
• 2003

Studies on the optimization of machining process can be divided into two different approaches: off-line feedrate scheduling and adaptive control. Each approach possesses its respective strong and weak points compared to each other. That is, each system can be complementary to the other. In this regard, a combined system, which is a feedrate control system fur cutting force optimization, was proposed in this paper to make the best of each approach. Experimental results show that the proposed system could overcome the weak points of the off-line feedrate scheduling system and the adaptive control system. In addition, from the figure, it can be confirmed that the off-line feedrate scheduling technique can improve the machining quality and can fulfill its function in the machine tool which has a adaptive controller.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.150-156
• /
• 1996

Static variations of cutting forces are estimated using spindle motor current. Static sensitivity of spindle motor current is higher than feed motor current. The linear relationship between the cutting force and RMS value of the spindle motor current is obtained. Using cutting force estimation, tool overload in milling process can be well detected, and cutting force is regulated at a constant level by feedrate adaptive control.

• 전자공학회논문지S
• /
• 제35S권9호
• /
• pp.35-42
• /
• 1998

CNC 가공에 있어서 가공정밀도와 생산성을 동시에 향상시킬 수 있는 기술의 개발이 필수적이다. 이러한 고정밀 고속가공을 위하여 이 논문에서는 신경망을 이용한 이송속도 신경망 적응제어 기법을 제안한다. 이 제어기는 신경망을 이용한 모사기와 이 신경망의 인버젼 알고리듬을 통한 반복학습 제어기로 구성된다. 신경망 모사기는 CNC 시스템의 비선형성과 불확실성으로 인한 이송속도와 윤곽오차 사이의 비선형 특성을 모사하고, 신경망 인버젼 방법과 목적 함수의 정의를 통해 반복학습 제어기법으로 허용 오차 내에서 최적의 이송속도를 실시간으로 구해 냄으로써 가공 성능을 향상시킨다.제안한 방법은 원, 코너, 인볼루트 윤곽 가공의 모의 실험을 통하여 성공적으로 평가되었다.

• 한국생산제조학회지
• /
• 제5권2호
• /
• pp.63-72
• /
• 1996

In order to regulate the cutting force at a desired level during peripheral end milling processes a feedrate override Adaptive Control Constraint (ACC) system was developed. The feedrate override function was accomplished through a development of programmable machine controller (PMC) interface technique on the NC controller, Nonlinear model of the cutting process was linearized as an adaptive model with a time varying process parameter. An integral type estimator was introduced for on-line estimation of the cutting process parameter, Zero order hold digital control methodology which uses pole-assignment concept for tuning of PI controllers was applied for the ACC system. Performance of the ACC system wsa confirmed on the vertical machining center equipped with fanuc OMC through a large amount of experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.690-694
• /
• 1996

In order to regulate the cutting force at a desired level during peripheral end milling processes, a feedrate override Adaptive Control Constant system was developed. This paper presents an explicit pole-assignment PI-control law through spindle motor current monitoring and its application to cutting force regulation for feedrate optimization. An experimental set-up is constructed for the commercial CNC machining center without any major changes of the structure. A data transfer system is constructed with standard interface between an IBM compatible PC and a CNC of the machining center. Experimental results show the validity of the system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.605-609
• /
• 1996

Continuous sliding mode control is applied to turning process for cutting force regulation. The highest feedrate compatible with the allowable cutting force is applied in rough cutting process such that maximum productivity is ensured and tool breakage is avoided. The programmed feedrate is overridden after the control algorithm is carried out. However, most CNC lathe manufacturers offer limited number of data bits far feedrate override, thus resulting in nonlinear behavior of the machine tools. Such nonlinearity brings “quantized” effect, and the optimal faedrate is rounded off before being fed into the CNC system. To compensate for this problem, continuous sliding mode control is applied. Conventional switching control law at a sliding surface is replaced by a smooth control interpolation in a selected boundary layer to avoid the excitation of high-frequency dynamics. Simulation results are presented in comparison with those obtained by applying adaptive control.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.135-140
• /
• 2002

Studies on the optimization of machining process can be divided into two different approaches: off-line feedrate scheduling and adaptive control. Each approach possesses its respective strong and weak points compared to each other. That is, each system can be complementary to the other. In this regard, a combined system, which is a feedrate control system for cutting force optimization, was proposed in this paper to make the best of each approach. Experimental results show that the proposed system could overcome the weak points of two systems.

• 한국정밀공학회지
• /
• 제17권5호
• /
• pp.173-179
• /
• 2000

While a cutting tool is machining a workpiece at various cutting depth, the feedrate is usually selected based on the maximum depth of cut. Even if this selection can avoid power saturation or tool breakage, it is very conservative compared to the capacity of the machine tools and can reduce the productivity significantly. Many adaptive control techniques that can adjust the feedrate to maintain the constant cutting force have been reported. However, these controllers are not very widely used in manufacturing industry because of the limitations in measuring the cutting force signals. In this paper, turning force control systems based on the estimated cutting force signals are proposed. A synthesized cutting force monitor is introduced to estimate the cutting force as accurately as a dynamometer does. Three control strategies of PI, adaptive and fuzzy logic controllers are applied to investigate the feasibility of utilizing the estimated cutting force fur turning force control. The experimental results demonstrate that the proposed systems can be easily realized in CNC lathe with requiring little additional hardware.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.27-33
• /
• 1999

In order to regulate cutting force at a desired level during NC lathe process, a feedrate override Adaptive Control Constraint system was developed. Nonlinear model of the cutting process was linearized as an adaptive model with a time varing process parameter. Performance of the ACC system was confirmed on the NC lathe equipped with the developed NC system through a large amount of experiment.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.69-77
• /
• 1993

본 연구에서는 Koren과 Masory가 개발하여 적분제어기에 적용한 제어알고리즘 을, 제어기 반응속도를 향상시키기 위하여 비례적분제어기에 적용하는 방법을 제시하 고자 한다. 실험을 통하여 제어시스템을 모델링하고, 근궤적법을 이용하여 시스템을 안정하게 유지하기 위한 개회로 이득을 선정하며, 기존의 보통선반을 적응제어시스템 으로 개발하여 고정이득 비례적분제어기와 가변이득 비례적분제어기의 성능을 실험을 통하여 비교하고자 한다.