• Animal cells and systems
• /
• v.15 no.4
• /
• pp.325-336
• /
• 2011

Feeding ecology was compared among the three tonguefishes Cynoglossus abbreviatus, C. joyneri and C. robustus, collected from Seto Inland Sea, Japan, from June 2000 to May 2001. They are benthivores, consuming mainly gammarid amphipods, shrimps, crabs, gastropods, bivalves and ophiuroids. C. abbreviatus consumed greater proportions of ophiuroids whereas C. joyneri and C. robustus ate more amphipods and shrimps. While C. abbreviatus consumed mostly ophiuroids in all size classes, the diets of C. joyneri and C. robustus showed ontogenetic changes in feeding habits; smaller individuals of C. joyneri and C. robustus consumed gammarid amphipods, whereas larger C. joyneri ate shrimps and gastropods, and larger C. robustus fed mainly on gastropods, crabs, bivalves and polychaetes. Cluster analysis based on diet similarities emphasized that the three Cynoglossus species could be categorized on a size-related basis into three feeding groups: smaller C. joyneri and C. rubustus (<25 cm TL) could be classified as group A, and the larger of them (>25 cm TL) as group B, whereas C. abbreviatus was categorized as group C. This means that some degree of resource partitioning can occur among the three Cynoglossus species. The seasonal changes in the diets were also significant for the three Cynoglossus species.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.3
• /
• pp.45-52
• /
• 2002

This article deals with the introduction of longitudinal instability of liquid rocket (pogo) and the analytical results on the frequency responses of Korean Sounding Rocket (KSR-III) propulsion feeding system. Both the stiffness of bellows and the cavitation volume of venturi affect the frequency response of the feeding system. Especially, bellows has a great roll to reduce the natural frequency of the feeding system. Also, oxidizer and fuel feeding systems of the KSR-III have natural frequencies of about 280Hz and 90Hz, respectively.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1370-1376
• /
• 2015

Generally, an autotransformer(AT) feeding system consists of double tracks, up and down, with the trolley wire and feeder wire of the up and down tracks connected in the sectioning post(SP). Consequently, load current or fault current flows on two tracks based on catenary impedance characteristics, making it difficult to estimate catenary impedance accurately. This paper presents a technique for the estimation of catenary impedance using boosting current compensation based on the current division characteristics of an AT feeding system to improve the operation performance of impedance relay. To verify the technique, we model an AT feeding system through a power analysis program (PSCAD/EMTDC) and simulate various operation and fault conditions. Through the simulation, we confirmed that the proposed technique has estimated catenary impedance with a similar degree of accuracy to the actual catenary impedance

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.5
• /
• pp.563-566
• /
• 1996

Five crossbred heifers(Holstein Friesian $\times$ Hariana) aged about one year and average body weight 157.0 kg were used to observe the effect of UMLD with restricted amount of wheat straw (500 g/100 kg body weight) on body weight gain and nutrient utilization. After seven months feeding the animals were switched to a revival diet consisted of wheat straw and concentrate mixture, for an additional six months. Fortnightly body weights were recorded and metabolism trials were conducted at the end of the two experimental periods. Results indicated that the average daily gain were 57.0 and 413.3 g in two feeding systems. This showed a sub-optimum growth during UMLD feeding which was compensated when good quality revival diet was available. Though, the nutrients intake were significantly (p < 0.01) lower in UMLD feeding period as compared to revival diet feeding, but digestibility of all the nutrients were alike statistically. It can be concluded that UMLD with restricted amount of wheat straw can be fed as scarcity feed for a short period, without causing irreparable loss to the animals, provided sufficient feed nutrients are available after the scarcity period.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.5
• /
• pp.659-665
• /
• 2016

The effects of three different feeding systems on beef cattle production performance, rumen fermentation, and rumen digesta particle structure were investigated by using 18 Limousin (steers) with a similar body weight ($575{\pm}10kg$) in a 80-d experiment. The animals were equally and randomly divided into three treatment groups, namely, total mixed ration group (cattle fed TMR), SI1 group (cattle fed concentrate firstly then roughage), and SI2 group (cattle fed roughage firstly then concentrate). The results showed that the average daily gain was significantly higher in cattle receiving TMR than in those receiving SI1 and SI2 (p<0.05). Consumption per kg weight gain of concentrate, silage, and combined net energy (NEmf) were significantly decreased when cattle received TMR, unlike when they received SI1 and SI2 (p<0.05), indicating that the feed efficiency of TMR was the highest. Blood urea nitrogen (BUN) was significantly decreased when cattle received TMR compared with that in cattle receiving SI1 (p<0.05), whereas there was no difference compared with that in cattle receiving SI2. Ammonia nitrogen concentration was significantly lower in cattle receiving TMR than in those receiving SI1 and SI2 (p<0.05). The rumen area of cattle that received TMR was significantly larger than that of cattle receiving SI1 (p<0.05), but there was no difference compared with that of cattle receiving SI2. Although there was no significant difference among the three feeding systems in rumen digesta particle distribution, the TMR group trended to have fewer large- and medium-sized particles and more small-sized particles than those in the SI1 and SI2 groups. In conclusion, cattle with dietary TMR showed increased weight gain and ruminal development and decreased BUN. This indicated that TMR feeding was more conducive toward improving the production performance and rumen fermentation of beef cattle.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.1
• /
• pp.116-122
• /
• 2007

An efficient enzyme system for the synthesis of L-tyrosine was developed using a fed-batch reactor with continuous feeding of phenol, pyruvate, and ammonia. A thermo- and chemostable tyrosine phenol-lyase from Symbiobacterium toebii was employed as the biocatalyst in this work. The enzyme was produced using a constitutive expression system in Escherichia coli BL21, and prepared as a soluble extract by rapid clarification, involving treatment with 40% methanol in the presence of excess ammonium chloride. The stability of the enzyme was maintained for at least 18 h under the synthesis conditions, including 75 mM phenol at pH 8.5 and $40^{\circ}C$. The fed-batch system (working volume, 0.51) containing 1.0 kU of the enzyme preparation was continuously fed with two substrate preparations: one containing 2.2 M phenol and 2.4 M sodium pyruvate, and the other containing 0.4 mM pyridoxal-5-phosphate and 4M ammonium chloride (pH 8.5). The system produced 130g/I of L-tyrosine within 30h, mostly as precipitated particles, upon continuous feeding of the substrates for 22 h. The maximum conversion yield of L-tyrosine was 94% on the basis of the supplied phenol.

• KSBB Journal
• /
• v.15 no.5
• /
• pp.489-496
• /
• 2000

Several culture systems including batch, two-stage CSTR, semi-fed batch, and two-stage cyclic fed-batch were investigated for the efficient production of the Fab fraction of PDC-E2 specific human monoclonal antibody using high cell density recombinant E. coli. A two-phase batch system and a two-stage continuous system were examined to overcome plasmid instability problems, by separating the growth and the production stages. The cell density and productivity of the two-stage continuous culture was better than that of the two-phase batch fermentation. In the two-stage continuous culture system with DO-stat, the cell growth and the productivity were superior to those of the system without the DO control. Also, almost total plasmid stability was maintained in the two-stage continuous culture system. Modified M9 medium was selected as an optimum feeding medium for the fed-batch process, and the optimum C/N ratio determined to be 2:3. The optimum feeding rate was $0.6g/\ell/hr$ for a constant feeding strategy in semi-fed batch system. When the feeding medium was fed by pulsing, it was observed that more frequent pulsing resulted in improved cell growth. The linear feeding method was the most efficient of the various feeding methods tested. Finally, high cell density culture using a two-stage cyclic fed batch system with pH-stat was tried because the linear feeding method showed limitations in terms of obtaining high cell densities, and a cell density of $54 g/\ell$ was achieved. It was concluded that the two-stage cyclic fed batch system was the most efficient system for high cell density culture of the systems tested. However, productivity improvements were lower than expected due to the extremely high accumulations of acetate, although the low levels of residual glucose were maintained.

• Journal of Dairy Science and Biotechnology
• /
• v.32 no.2
• /
• pp.63-70
• /
• 2014

Automatic milking systems (AMS) have been increasingly introduced to Korean dairy farms. However, in comparison with conventional milking systems (CMS), some negative changes in milk quality are being observed. The use of AMS leads to an increase in milking frequency, which in turn might result in higher physical stress on the milk, possibly causing changes in the milk fat globule (MFG) membrane. Therefore, the purpose of this study was to examine the effect of the different milking systems on the milk quality, with a focus on milk fat properties. At the same time, we studied the effect of feeding the dairy cows with protected fat. Raw milk samples were taken monthly from individual cows as well as from bulk tanks at four AMS and four CMS dairy farms. We measured quality-related parameters such as MFG size distribution, free fatty acid content and composition, and acid values. Although most results showed no significant differences with regard to the milking system, we found a relatively high positive correlation between MFG size and milk fat content. Moreover, larger MFG size was observed in the milk when cows had been fed protected fat. The significantly higher (P< 0.05) free fatty acid content of milk observed under this experimental condition could be attributed to higher milking frequency as a result of using AMS.

• Journal of Korean Academy of Nursing
• /
• v.33 no.4
• /
• pp.488-494
• /
• 2003

Purpose. To examine the effects of body position and time after feeding on gastric residuals in low birth weight infants(LBW). Methods. A repeated measures design was conducted. Twenty LBW infants being fed via indwelling nasogastric tubes were randomly assigned to one of 5 different position orderings. In each position, gastric residuals were measured at 30, 60, 90, 120, 150, and 180 minutes after feeding. Results. In comparisons of gastric residuals with position and time, the main effects of position and time were statistically significant (F=5.038, p=0.001; F=429.763, p < 0.001, respectively), but the interaction between position and time was found not to be significant. In pairwise comparisons, the gastric residuals were more reduced in the right anterior oblique and prone positions compared with the left lateral position (p < 0.05) and the differences across time periods were significant (p < 0.001). Conclusions. The body position after feeding has a significant affect on gastric residuals over time in LBW infants. The right anterior oblique or prone position is recommended rather than left lateral position after feeding. Knowledge of the proper position and the pattern of gastric emptying over time after feeding may lead to the development of evidence-based nursing care.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.3
• /
• pp.165-169
• /
• 2018

The main objective of this experiment was to investigate effects of two different feeding systems on body weight, milk yield, milk composition, and mineral and fatty acids content of Holstein dairy cows' milk. Sixteen of 25 months-old Holstein dairy cows were assigned to two groups (n=8) to study effects of the feeding system for 150 days. Two feeding systems were compared for five months; Group 1 was housed indoors and mainly fed a concentrate diet, Group 2 was maintained outdoors for five-seven hours/day on various kinds grass in a pasture. The experiment was conducted June-October 2017. Results revealed the indoor-fed cows had higher body weight, that was significant compared with the outdoor-based feeding system of Holstein dairy cows (p<0.05). Indoor-raised milking cows had higher milk yield (32.45 kg) as compared with pasture-raised milk yield (26.44 kg). Cows fed indoors significantly increased milk yield, total protein content, lactose, citric acid level, and lowered level of total solid and free fatty acids relative to the pasture-fed milking cows (p>0.05). There were higher levels of mineral content and fatty acid content in the milk of indoor-fed dairy cows than the pasture-raised dairy cows (p>0.05). Our study results demonstrated the potential benefits of the indoor feeding system for increased body weight, milk yield, mineral and fatty acids content summer through autumn when low pasture growth rates and quality may otherwise limit production.