• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.3
• /
• pp.267-274
• /
• 1999

This paper proposes an adaptive sliding mode control scheme for an autopilot design of Skid-to-Turn (STT) missiles. The feedback linearization controller eliminates nonlinear terms in STT dynamics and makes the entire system linear. But the modeling errors in dynamics and the external disturbances exert bad influence on the performance of the feedback linearization controller. To handle these uncertainties, an adaptive control scheme is developed, where a bound of the uncertainties is estimated by an adaptive law based on a sliding surface. The asymptotic output tracking is proved by using the Lyapunov stability theory. Simulations for STT missiles illustrate the validity of the proposed scheme.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.200-209
• /
• 1999

This paper presents a precise tracking control scheme for the proposed parallel robot using artificial neural network. This control scheme is composed of three feedback controllers and one feedforward controller. Conventional PD controller and artificial neural network are used as feedback and feedforward controller respectively. A backpropagation learning strategy is applied to the training of artificial neural network, and PD controller outputs are used as target outputs. The PD controllers are designed at the robot dynamics based on inter-relationship between active joints and moving platform. Feedback controllers insure the total stability of system, and feedforward controller generates the control signal for trajectory tracking. The precise tracking performance of proposed control scheme is proved by computer simulation.

• Journal of Ubiquitous Convergence Technology
• /
• v.1 no.1
• /
• pp.28-34
• /
• 2007

Tree-based reliable multicast protocols provide scalability by distributing error-recovery tasks among several repair nodes. These repair nodes perform local error recovery for their receiver nodes using the data stored in their buffers. We propose a packet loss patterns adaptive feedback scheduling scheme to manage these buffers in an efficient manner. Under our scheme, receiver nodes send NAKs to repair nodes to request packet retransmissions only when the packet losses are independent events from other nodes. At dynamic and infrequent intervals, they also send ACKs to indicate which packets can be safely discarded from the repair node's buffer. Our scheme reduces delay in error recovery because the requested packets are almost always available in the repair node's buffers. It also reduces the repair node's workload because (a) each receiver node sends infrequent ACKs with non-fixed intervals and (b) their sending times are fairly distributed among all the receiver nodes.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.235-240
• /
• 2004

The equipment of industrial robot in manufacturing and assembly lines has rapidly increased. In order to achieve high productivity and flexibility, it becomes very important to develop the visual feedback control system with Off-Line Programming System(OLPS). We can save much efforts and time in adjusting robots to newly defined workcells by using OLPS. A proposed visual calibration scheme is based on position-based visual feedback. The calibration program firstly generates predicted images of objects in an assumed end-effector position. The process to generate predicted images consists of projection to screen-coordinates, visible range test and construction of simple silhouette figures. Then camera images acquired are compared with predicted ones for updating position and orientation data. Computation of error is very simple because the scheme is based on perspective projection which can be also expanded to experimental results. Computation time can be extremely reduced because the proposed method does not require the precise calculation of tree-dimensional object data and image Jacobian.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.72-78
• /
• 2006

The paper proposes reference model error feedback control scheme for motion control system with hard non-linear components as like saturation and dead-zone in plant input part. Additionally, the plant has the system uncertainty effected by plant model parameter deviation and disturbance. The control algorithm uses the reference model to apply additional feedback loop with the error between reference model output and actual output effected by disturbance and non-linear components. And the stability evaluation based on Popov stability and controller design method are formulated to be performed. The effectiveness of the proposed scheme is examined by simulations. The results are proven by reasonable performances following reference model responses with good disturbance rejection performance without over-tuning of controller.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.10
• /
• pp.1498-1506
• /
• 1989

A new stabilization scheme is proposed in which the local state feedback is utilized in each decentralized controller for large-scale interconnected systems. In the proposed scheme, the controller is designed in two steps. First, the feedback gain of each decentralized controller is temporarily chosen so that the eigenvalues of each isolated subsystem are placed at the desired locations in the complex plane. Secondly, the feedback gain of each controller is compensated so that the time derivative of the Lyapunov function candidate for the overall closed-loop system should be negative. A sufficient condition which assures the global system to stable is given.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.1
• /
• pp.162-172
• /
• 1997

In this paper, we investigated the performance of a binary feedback switch algorithm for the ABR(Available Bit Rate) service in ATM networks. A binary feedback switch is also called EFCI(Explicit Forward Congestion Indication) switch and can be classificed into input cell processing(IP) scheme according to processing methods for the EFCI bit in data-cell header. We proposed two implementation methods for the binary feedback switch according to EFCI-bit processing schemes, and analyzed the ACR(Allowed Cell Rate) of source and the queue length of switch for each scheme in steady state. In addition, we derived the upper and lower bounds for maximum and minimum queue lengths, respectively, and investigated the impact of ABR parameters on the queue length.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.364-370
• /
• 2010

In this paper, we propose a cooperative channel sensing scheme in the presence of feedback errors. Accurate local sensing results may not directly be applied to cooperative sensing due to feedback errors. We consider the cooperative channel sensing that utilizes local sensing results in good feedback channel condition. Finally, simulation results show that the proposed scheme can maximize the detection probability while guaranteeing desired false alarm probability.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.418-429
• /
• 2018

This paper studies the decentralized position/force control problem for constrained reconfigurable manipulator without torque sensing. A novel joint torque estimation scheme that exploits the existing structural elasticity of the manipulator joint with harmonic drive model is applied for each joint module. Based on the estimated joint torque and dynamic output feedback technique, a decentralized position/force control strategy is presented. In order to solve the problem of controller parameter perturbation, the non-fragile robust technique is introduced into the dynamic output feedback controller. Subsequently, the stability of the closed-loop system is proved using the Lyapunov theory and linear matrix inequality (LMI) technique. Finally, two 2-DOF constrained reconfigurable manipulators with different configurations are applied to verify the effectiveness of the proposed control scheme in numerical simulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1637-1645
• /
• 2004

In remote control of telerobotics equipment, the real-time visual feedback is necessary in order to facilitate real-time control. Because of the network congestion and the associated delays, the real-time image feedback is generally difficult in the public networks like internet. If the remote user is not able to receive the image feedback within a certain time, the work performance may tend to decrease, and it makes difficulties to control of the telerobotics equipment. In this paper, we propose an improved visual feedback scheme over the internet for telerobotics system. The size of a remote site image and its quality are adjusted for efficient transmission. The constructed system has a better real-time update characteristics, and shows a potential for the real-time visual control of the telerobotics system.