• 조명전기설비학회논문지
• /
• 제12권4호
• /
• pp.81-89
• /
• 1998

본 논문에서는 유도전동기의 가변속 구동시 제어성능이 우수한 직접빽터 제어시스템에 관하여 연구하였다. 벡터제어시 펼요한 전동기의 자속정보는 궤환제어의 장점이 있는 자속연산형을 사용하여 구하였으며, 이때의 모델은 회전자 회로의 전류모델 방식을 이용하였다. 또한 회전자 좌표계에서의 자속관측기를 구성하여 고정 자 좌표계 사용시 나타날 수 있는 d-q축 간섭현상 및 이산화의 오차를 경감시켰다. 디지털 시율레이션올 통하여 원활한 제어특성이 나타남을 입증하였으며 고성능 DSP소자 및 고속 IGBT를 채용한 인버터 드라이브 시스템을 구현하여 그 특성을 확인하였다.

• 한국정보통신학회논문지
• /
• 제18권8호
• /
• pp.2037-2042
• /
• 2014

32 채널 이상의 파장다중화 광신호 전송에서 이득포화 광신호 사용법이 적용되었고, 이 이득 포화 광신호의 세 가지 다른 적용 방법들이 비교되었다. 이 세 가지 방법은 고출력 DFB LD 들만을 사용하는 경우, 광증폭기로 증폭된 입력광원들을 사용하는 경우, 그리고 하나의 이득포화 광원과 소수의 파장다중화 광원들을 사용하는 경우들이다. 하나의 포화 광원을 이용한 경우는 다시 이 광원의 파장 의존성을 확인하기 위해 1532.3 nm, 1545.7 nm, 그리고 1558.2 nm의 세 가지 경우가 비교되었다. 그 결과 입력광원이 증폭기로 증폭되더라도 ASE에 의한 잡음은 영향이 미미하였음을 확인하였고, 포화 광원의 파장위치는 장파장인 경우 이득이 1 dB 이상 감소하였으며 그 원인이 분석되었다.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제2권3호
• /
• pp.117-124
• /
• 2013

본 논문에서는 유무선 이종망의 네트워크에서 혼잡손실과 무선손실을 구별하지 못하고 전송률을 감소시키는 TFRC(TCP Friendly Rate Control)의 성능을 개선하기 위해서 최소 전송률을 보장하는 TFRC를 제안한다. 이 TFRC기법은 기존 TFRC기법의 패킷손실률에 따른 손실이벤트 비율(loss event rate)을 제한하고 피드백 타임아웃에 따른 전송률 감소를 제한함으로써 비디오의 최소전송률을 보장 한다. TCP와 기존의 TFRC, TCP와 제안하는 TFRC를 각각 같은 네트워크 망에서 경쟁하는 환경으로 실험 했을 때 기존의 TFRC와 비교해서 제안하는 TFRC의 전송률이 보장되어 더 좋은 성능을 보였다. 결과적으로 제안하는 TFRC기법이 최소전송률을 보장함으로써 비디오 스트리밍 서비스의 품질을 보장할 수 있다는 것 을 알 수 있다.

• Smart Structures and Systems
• /
• 제7권5호
• /
• pp.365-378
• /
• 2011

Piezo-based active structural health monitoring (SHM) requires amplifiers specifically designed for capacitive loads. Moreover, with the increase in number of applications of wireless SHM systems, energy efficiency and cost reduction for this type of amplifiers is becoming a requirement. General lab grade amplifiers are big and costly, and not built for outdoor environments. Although some piezoceramic power amplifiers are available in the market, none of them are specifically targeting the wireless constraints and low power requirements. In this paper, a piezoceramic transducer amplifier for wireless active SHM systems has been designed. Power requirements are met by two digital On/Off switches that set the amplifier in a standby state when not in use. It provides a stable ${\pm}180$ Volts output with a bandwidth of 7k Hz using a single 12 V battery. Additionally, both voltage and current outputs are provided for feedback control, impedance check, or actuator damage verification. Vibration control tests of an aluminum beam were conducted in the University of Houston lab, while wireless active SHM tests of a wind turbine blade were performed in the Harbin Institute of Technology wind tunnel. The results showed that the developed amplifier provided equivalent results to commercial solutions in suppressing structural vibrations, and that it allows researchers to perform active wireless SHM on moving objects with no power wires from the grid.

• Smart Structures and Systems
• /
• 제13권2호
• /
• pp.319-341
• /
• 2014

A family of smart tuned mass dampers (STMDs) with variable frequency and damping properties is analyzed under harmonic excitations and ground motions. Two types of STMDs are studied: one is realized by a semi-active independently variable stiffness (SAIVS) device and the other is realized by a pendulum with an adjustable length. Based on the feedback signal, the angle of the SAIVS device or the length of the pendulum is adjusted by using a servomotor such that the frequency of the STMD matches the dominant excitation frequency in real-time. Closed-form solutions are derived for the two types of STMDs under harmonic excitations and ground motions. Results indicate that a small damping ratio (zero damping is the best theoretically) and an appropriate mass ratio can produce significant reduction when compared to the case with no tuned mass damper. Experiments are conducted to verify the theoretical result of the smart pendulum TMD (SPTMD). Frequency tuning of the SPTMD is implemented through tracking and analyzing the signal of the excitation using a short time Fourier transformation (STFT) based control algorithm. It is found that the theoretical model can predict the structural responses well. Both the SAIVS STMD and the SPTMD can significantly attenuate the structural responses and outperform the conventional passive TMDs.

• 대한건축학회논문집:구조계
• /
• 제35권2호
• /
• pp.29-36
• /
• 2019

Modular construction has benefits such as short construction duration and high productivity owing to the production in factory and owing to simultaneous on-site work. However, rework occurs in modular construction and the rework affects the efficiency of modular construction. The almost of causes of rework are exist in design process. To reduce the cause of rework, the information flow of the design process should be managed and the plan to reduce rework should be included. However, the modular construction has complex process because of impeded unit production so it is hard to manage the information flow in design process. Moreover, when the plan to reduce rework is included, the design process will be more complicated. Therefore, the objective of this research is to suggest the design process including the rework reduction plan and to alleviate the complexity of design process by using Dependency Structure Matrix(DSM). By using DSM, the iteration and feedback in design process is reduced and it can be expected that rework in modular project can be reduced by using suggested design process.

• International journal of advanced smart convergence
• /
• 제12권2호
• /
• pp.159-166
• /
• 2023

Due to the aging workforce in the construction industry in South Korea, the accident rate has been increasing. The cognitive abilities of older workers are closely related to both safety incidents and labor productivity. Therefore, there is a need to improve cognitive abilities through personalized training based on cognitive assessment results, using cognitive training content, in order to enable safe performance in labor-intensive environments. The provided cognitive training content includes concentration, memory, oreintation, attention, and executive functions. Difficulty levels were applied to each content to enhance user engagement and interest. To stimulate interest and encourage active participation of the participants, the difficulty level was automatically adjusted based on feedback from the MMSE-DS results and content measurement data. Based on the accumulated data, individual training scenarios have been set differently to intensively improve insufficient cognitive skills, and cognitive training programs will be developed to reduce safety accidents at construction sites through measured data and research. Through such simple cognitive training, it is expected that the reduction of accidents in the aging construction workforce can lead to a decrease in the social costs associated with prolonged construction periods caused by accidents.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.32-36
• /
• 2015

This study explores the issue of program management consortia involving multinational participants. The aim of this research was to leverage advantages in program management (PM) skills and PM model improvement in product line construction in mega scale construction programs, typically funded by public funds. Such ventures involve multinational parties using dedicated partnering based on a program management consortium (PMC) to reduce confrontation between parties in complex circumstances, allowing an open and non-adversarial approach to project management. This research also seeks to implement an ongoing feedback program of best practices and lessons learned to minimize the repetition of mistakes and to reduce costs in sequenced construction. Recently, the Korean government has planned to undertake three large new projects: the Korean Peninsula major river maintenance, the reclamation of Se-Mangum, and the Science/Business City. This paper starts by providing a framework for the cost-reduction strategy for the United States Forces Korea (USFK) Relocation Program, which will be funded with public funds and a private fund investment (PFI) that combines programs executed by two governments as owners and multinational stakeholders, joined in the PMC. The establishment of project-oriented consortia is an innovative and non-adversarial approach to massive international construction projects. Such projects have used various tools effectively and skillfully. This experience may offer an opportunity to practice new and advanced program management delivery methods, and it is expected that Korea will gain a competitive advantage in the international construction market.

• 대한지역사회영양학회지
• /
• 제10권6호
• /
• pp.905-919
• /
• 2005

This study raised the necessity of developing performance indicators for measuring the management efficiency and effectiveness of school food service, and as a means of helping its implementation, a balanced score card (BSC) approach developed by Norton and Kaplan was adopted. This study established BSC in seven phases through literature: Phase 1 Defining a school food service and the scope of working activities, Phase 2 Establishing the vision of a school food service, Phase 3 Setting strategic goals, Phase 4 Identifying critical success factors (CSFs), Phase 5 Developing Key Performance Indicators (KPIs), Phase 6 Extracting cause and effect relationship, and Phase 7 Completing a preliminary BSC. The preliminary BSC was fumed into a survey, which was administered to food service related people working at the Office of Education and School Food Service including 16 offices,209 dietitians, 48 school administrators both from self-operated and contract-managed, and 9 experts in areas related to school food service. They were asked questions about strategies from 4 different perspectives,12 CSFs, 39 KPls, and the cause and effect relationships among them. As a result, among the CSFs based on 4 different perspectives, all factors other than ' zero sum on profit/loss ' from the financial perspective turned out to be valid. In terms of KPIs, manufacturing cost percentages, casualty loss count/reduction rates, school foodervice participation rates, and sales goal achievement rates were found to be valid from the financial perspective, while student satisfaction index, faculty satisfaction index, leftover ratio, nutrition educational performance count, index of evaluating nutrition education, customer claim count/reduction rate, handling customer claim count/reduction rate, and parent satisfaction index were found to be valid from the customers' perspective. Besides, nutritional requirement sufficient ratio, nutritional management score, food poisoning outbreak count, employee safety accident count, sanitary inspection assessment index, meals per labor hour (productivity index), computerization ratio, operational management index, and purchase management assessment index were also found to be valid from the perspective of internal business processes. From the perspective of innovation and learning, employee turnover ratio/rate of absenteeism, annual education and training count, employee satisfaction index, human resource management assessment index, annual menu-related customer feedback, food service information index for employees and parents/schools were also found to be valid. The significance of this study is to present indices for measuring overall performance of school lunch food service operations without putting any limitation on types of school food service management, and to help correctly assess the contribution of the current types of school food service management to schools and students. (Korean J Community Nutrition 10(6) : $905\∼919$, 2005)

• 융합신호처리학회논문지
• /
• 제9권4호
• /
• pp.280-287
• /
• 2008

간접접촉 심전도(IDC-ECG) 측정에 공통 모드 잡음을 줄이기 위해 오른발 구동(Driven-right-leg) 접지 방법을 적용하고 그 접지의 성능을 조사하였다. 최근에 소개된 간접접촉 심전도 측정 기술은 전극과 인체 피부간의 직접 접촉이 필요하지 않기 때문에, 최근에 필요성이 대두되고 있는 가정에서의 장기간 무구속 심전도 측정에 적합한 측정방법으로서 현재 다양한 응용이 연구되고 있다. 그렇지만 간접접촉 심전도는 전원선에 의한 60Hz 잡음이 기존 측정 방법보다 크게 발생하여, 응용 범위의 확대에 제약 조건이 되고 있다. 본 연구에서는, 기존의 심전도 측정 방법에 사용되는 오른발 구동 접지 방법을 간접접촉 심전도 측정 방법에도 적용하여, 공통모드 잡음 성분을 반전 증폭하여 의자 좌판(seat)에 깔린 전도성 직물을 통해 인체에 feedback하였다. 이로써 피부와 직접 접촉이 없는 간접 접촉 방식의 오른발 구동 접지를 구현하였으며, 이 접지가 안정적으로 동작되고, 오른발 구동 이득이 약 1000정도에서 40dB 수준의 전원 잡음 감소 됨을 확인할 수 있었다. 이 연구의 결과로 간접접촉 심전도의 주파수 대역을 기존의 30Hz이하에서 100Hz 수준까지 높일 수 있게 되었으며, 접지 임피던스를 높일 수 있게 되어 간접접촉 심전도의 응용 분야를 더욱 넓힐 수 있게 되었다.