• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.5
• /
• pp.638-642
• /
• 2004

In Australia, many cropping areas are affected by salt. In these regions, Chenopodiaceous plants, such as Atriplex, Kochia and Bassia spp have been planted to improve soil conditions. These plants have become invaluable feed resources for grazing animals in dry summers, but have a high sodium content. To assess the impact of high salt intake on grazing deer, two experiments were conducted. The first experiment used 30 fallow weaner deer to examine the effect of salt level in the diet on feed intake, water intake and body weight of fallow deer. Salt was added to lucerne chaff at 0, 1.5, 3.0, 4.5 and 6% and fresh water was offered all the time. Increasing the salt level in the diet from 0 to 6% didn't affect feed intake, osmotic pressure and mineral concentration in blood of fallow deer. However, water intake was significantly higher (p<0.05) in deer fed diets containing more than 3% salt. Body weight was lower (p${\leq}$0.056) for fallow deer in July and August when salt content was over 3%, suggesting they can ingest over 15 g sodium/day without significant depression in both feed intake and growth rate if the fresh water is available. In the second experiment, 18 red weaner deer were fed lucerne chaff diets containing 1.5, 4.5 and 6.0% salt with 6 deer/diet. The results revealed that feed intake and blood osmotic pressure were similar (p>0.05) for red deer fed different levels of salt although the feed intake declined from 1.91 to 1.67 kg with the increase of salt level from 1.5% to 6.0% in the diet. Water intake was significantly higher for deer fed diets containing over 4.5% salt, but there was no difference in body weight during the experiment. However, no recommendation can be made on the salt tolerance of red deer due to limited increment of salt level in the diet.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.1
• /
• pp.99-105
• /
• 1993

This study determined the macro-mineral levels in plants and sheep, at different times during the year, at three farms in northern China. Samples of plants, animal tissues and faeces were collected at 5 to 8 times during the year from each site. They were analysed for calcium, sodium, phosphorus, magnesium and potassium. Sodium concentrations in plants were below those recommended for optimum animal production at all sites for all or part of the year (0.01-1.66 g/kg DM). Low concentrations of sodium in faeces were measured and signs of sodium deficiency (soil ingestion) were observed on one farm. There were seasonal trends in other mineral levels in plants and animals. Plants were lowest in potassium (2.3-13.4 g/kg DM), magnesium (1.28-4.82 g/kg DM) and phosphorus (0.24-1.62 g/kg DM) in winter and spring. However, high levels of these elements were supplied in the feed supplements used at this time of the year. During the periods of rapid pasture growth, in summer and autumn, supplements of feed and salt are often not provide even though pasture concentrations of phosphorus and sodium are low. It may be at these times that sheep will be most susceptible to deficiencies of these elements.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.297-305
• /
• 2003

The family of lemnacae colloquially known as duckweed contains the world' smallest species of flowering plants (macrophytes). Aquatic and free-floating, their most striking qualities are a capacity for explosive reproduction and an almost complete lack of fibrous material. They are widely used for reducing chemical loading in facultative sewage lagoons, but their greatest potential lies in their ability to produce large quantities of protein rich biomass, suitable for feeding to a wide range of animals, including fish, poultry and cattle. Despite these qualities there are numerous impediments to these plants being incorporated into western farming systems. Large genetically determined variations in growth in response to nutrients and climate, apparent anti-nutritional factors, concerns about sequestration of heavy metals and possible transference of pathogens raise questions about the safety and usefulness of these plants. A clear understanding of how to address and overcome these impediments needs to be developed before duckweed is widely accepted for nutrient reclamation and as a source of animal feed.

• Korean Journal of Plant Resources
• /
• v.34 no.6
• /
• pp.633-660
• /
• 2021

This study was carried out to elucidate the distribution of vascular plants and their usefulness of Mt. Munsusan (1,205 m) in Bonghwa County, North Gyeongsang Province, South Korea. The vascular plants that were investigated in 2 years (2019 ~ 2020) with 15 times consisted a total of 571 taxa; 94 families, 310 genera, 496 species, 4 subspecies, 63 varieties and 8 formas. For the Korean endemic plants, 17 taxa were recorded and 3 taxa of Vulnerable Species (VU) and 9 taxa of Least Concerned species (LC) categorized by the Korean Forest Service as rare plants were investigated in this region. Furthermore, IV, III degrees of floristic regional indicator plants designated by the Korean Ministry of Environment included 8 taxa and 27 taxa, respectively. Among them, edible, medicinal, ornamental, feed/composting, industrial plants were 391 taxa, 359 taxa, 301 taxa, 241 taxa, 217 taxa, respectively. In addition, 25 taxa of naturalized plants were observed.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.3
• /
• pp.107-117
• /
• 1998

In order to removal turbidity at high turbidity, this study was carried to evaluate the coagulants(Alum, PACl, PACS) that was suited the characteristics of raw water in water treatment plants and to determinate the optimum method of lime feed. When the optimum coagulant was selected the organic matter removal was also investigated as $UV_{254}$. PACl, lime first feed had the highest turbidity removal efficiency rate as above 99.1% and then $UV_{254}$ removal rate was obtained over than 88.0%. If you had the necessary of the lime feed, among the method of lime feed time interval feed largely was improved than simultaneous feed. Also, lime feed dose had about 1/5 of coagulants dose in case of Alum and PACl, but always PACS should be considerated lime dose.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.849-859
• /
• 2022

Feed-water valves (FWVs) are used to regulate the flow rate of water entering steam generators, which are very important devices in nuclear power plants. Due to the working environment of relatively high pressure and temperature, there is strength failure problem of valve body in some cases. Based on the thermo-fluid-solid coupling model, the valve body stress of the feed-water valve in the opening process is investigated. The flow field characteristics inside the valve and temperature change of the valve body with time are studied. The stress analysis of the valve body is carried out considering mechanical stress and thermal stress comprehensively. The results show that the area with relatively high-velocity area moves gradually from the bottom of the cross section to the top of the cross section with the increase of the opening degree. The whole valve body reaches the same temperature of 250 ℃ at the time of 1894 s. The maximum stress of the valve body meets the design requirements by stress assessment. This work can be referred for the design of FWVs and other similar valves.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.553-556
• /
• 1989

Nowadays in power plant feed water control, it is very important to retain the stable drum level though power changes very fast. For the stable drum level in power plant, we have to model our plants and get the system functions. We make the L.Q. controller by using these functions and apply it to these systems. And we get the more stable drum level which is controlled by feed water qualities.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.212-214
• /
• 2004

It is widely recognized that the residual stress of weldment affects steel construction and causes fracture initiation of welded structures. It is necessary to know since the power plants adopt a variety of welding processes distribution and magnitude of residual stresses. Therefore the purpose of present study is to investigate the validity of the indentation method to measure residual stresses of steel plates by residual stresses measured form the specimens of hot reheater pipes, cold reheater pipes and feed water lines used in power plants.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1603-1604
• /
• 2007

The load of power plants changes every from time to time according to which steam flow of boiler changes. the feed water control is very important for the power plant to be operated in its stability conditions. In case of circulation type boiler, the instability of feed water control leads to instability of drum level control. The higher level of drum water can induce bad quality steam to go into turbine which means the possibility of damage. The lower level of drum water can induce the tubes of boiler water wall to be overheated. In case of once through type boiler, the instability of feed water control leads to bad cooling of superheaters. The less the feed water flow is, the more heated the superheater is. It is necessary for the turbine driving feed water pump to be controlled for the optimal feed water flow in the large capacity power plant. The speed of turbine is controled for the feed water flow. By the way, the optimal control of steam valve is necessary for the speed control of turbine. Therefore, the various kinds of the steam valve structures are introduced in this paper

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.825-831
• /
• 2012

The retrofitting of a thickening unit process is widely considered in municipal wastewater treatment plants in Korea to enhance the anaerobic digestion efficiency. The authors examined the effect of feed concentration (2-34.1 g VS/L) and feed to microorganism (F/M) ratio (0.50-1.35 g VS/g VS) on anaerobic batch digestion of sewage sludge. Methane yield over 90 mL $CH_4/g$ $VS_{feed}$ was found at a feed concentration in the range of 12-26 g VS/L and a F/M ratio below 0.6 g VS/g VS. A high F/M ratio decreased methane yield and rate with oragnic acid accumulation. As sudden increase of sewage sludge concentration prior to anaerobic digestion would jeopardize the digester performance due to the rasied F/M ratio, gradual increase of the sludge feed concentration or an additional biomass retention in the digester is recommended.