• Asian-Australasian Journal of Animal Sciences
• /
• 제5권1호
• /
• pp.55-61
• /
• 1992

To determine the effect of time after feeding on distribution of particle size of digesta in the gastrointestinal tract, 16 sheep given orchardgrass first cut hay were slaughtered at 2, 8, 16 and 24 hours after feeding and digesta in diverse sites of the tract were sieved into four fractions of particle size larger than $1180{\mu}m$, 300-1180, 45-300 and less than 45. Following results were obtained: 1) In the reticulo-rumen, the proportion of particles larger than $1180{\mu}m$ decreased with the time after feeding, while the other particle size fractions did not change with time after feeding. 2) In the post-ruminal alimentary tract, the proportion of particles larger than $1180{\mu}m$ was significantly smaller than that in the reticulo-rumen and distribution of fractions of every particle size stayed consistently at about the same level irrespective of the time after feeding. 3) In the cecum, the fraction of particle size less than $45{\mu}m$ appeared to be selectively retained when the passage rate was considered.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1994년도 추계 학술발표회
• /
• pp.137-138
• /
• 1994

Anionic water dispersible copolyesters were synthesized and characterized. Viscosity of the copolyester is lower than that of routine acrylic water dispersible polymers. Adhesive force of the copolyester was much higher than that of water dispersible acrylic polymers. Particle size of the copolyesters in water decreased with the increase of DMS or DEG feed ratio. With the conclusive study of the data of particle size and potential, it was found that the dispersion stability of copolyesters in water increased with the increase of DMS or DEG feed ratio. Judging from the results of potential and particle size of copolyesters, there seems to be competition between two dispersion stability factors, i.e. electrostatic stabilization and steric stabilization and as a result, morphological change of particles occurrs. Tg decreased with the increase of DEG molar feed ratio or oil contents.

• 한국결정성장학회지
• /
• 제6권2호
• /
• pp.121-128
• /
• 1996

Floating zone법으로 $LiNbO_3$ 단결정올 육성하는데 있어서 원료분말 합성과 원료봉 소결 과정의 최척의 조건을 설험적으로 조사하였다. 원료분말 합성사 낮은 고상반응 온도(700, $800^{\circ}C$)에서는 미량의 $Li_2CO_3$와 $Nb_2O_5$가 미반응상태로 남아있고, 고상반응 온도가 높을 때 ($1000^{\circ}C$)에는 입자성장이 일어나 후속공정인 원료봉 소결에 악영향을 미침이 확인되었다. $950^{\circ}C$에서 12시간 고상반응시킨 원료분말이 $LiNbO_3$의 결정상을 가지면서 미세한 결정립 크기와 균일한 크기분포를 보여 $950^{\circ}C$, 12시간이 최적의 원료분말 합성조건이었다. 원료봉 소결시 소 결온도가 높아질수록, 또 소결시간이 늘어날수록 치밀도가 증가하고 업자성장 양상이 급격히 증가함을 알 수 었었다. $1100^{\circ}C$에서 2시간 동안 소결한 원료봉이 치밀하고, 작은 결정립 크기 와 균얼한 크기분포를 나타내어 floating zone법에 의한 $LiNbO_3$ 단결정성장에 가장 적합한 최적 의 소결 조건은 $1100^{\circ}C$, 2시간엄이 확인되었다.

• 한국분말재료학회지
• /
• 제9권5호
• /
• pp.315-321
• /
• 2002

Pure tantalum powder has been produced by combining Na as a reducing agent, $K_2TaF_{7}$ as feed material, KCl and KF as a diluent in a stainless steel(SUS) bomb, using the method of metallothermic reduction. The present study investigated the effect of the amount of the diluent and reaction temperature on the characteristics of tantalum powder in the production process. The temperature applied in this study $850^{\circ}C$ and the amount of the additional reductant from +5% of the theoretical amount used for the reduction of the entire $K_2TaF_{7}$. The results showed that as the amount of the diluent increased, the reaction temperature became lower because the diluent prevented a temperature rise. Also, according to the mixture ratio of the feed materials and the diluent changed from 1 : 0.25 to 1 : 2, the particle size decreased from $5\mutextrm{m}$ to $1\mutextrm{m}$ and a particle size distribution which is below 325 mesh in fined powder increases from 71% to 83%. The average size of Tantalum powder, $2-4\mutextrm{m}$, was close to that of the commercial powders($2-5\mutextrm{m}$). Also under this condition, impurities contained in the powder were within the range allowed for the commercial Ta powders.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권9호
• /
• pp.1256-1266
• /
• 2009

Effects of particle size and physical effective fibre (peNDF) of rice straw in diets on chewing activities, feed intake, flow, site and extent of digestion and rumen fermentation in goats were investigated. A 4${\times}$4 Latin square design was employed using 4 mature Liuyang black goats fitted with permanent ruminal, duodenal, and terminal ileal fistulae. During each of the 4 periods, goats were offered 1 of 4 diets that were similar in nutritional content but varied in particle sizes and peNDF through alteration of the theoretical cut length of rice straw (10, 20, 40, and 80 mm, respectively). Dietary peNDF contents were determined using a sieve for particle separation above 8 mm, and were 17.4, 20.9, 22.5 and 25.4%, respectively. Results showed that increasing the particle size and peNDF significantly (p<0.05) increased the time spent on rumination and chewing activities, duodenal starch digestibility and ruminal pH, and decreased ruminal starch digestibility and $NH_{3}$-N concentration. Intake and total tract digestibility of nutrients (i.e. dry matter, organic matter, and starch) and ruminal fermentation were not affected by the dietary particle size and peNDF. Increased particle size and peNDF did not affect ruminal fibre digestibility, but had a great impact on the intestinal and total tract fibre digestibility. The study suggested that rice straw particle size or dietary peNDF was the important influential factor for chewing activity, intestinal fibre and starch digestibility, and ruminal pH, but had minimal impact on feed intake, duodenal and ileal flow, ruminal and total tract digestibility, and ruminal fermentation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권5호
• /
• pp.597-607
• /
• 1998

Processing is generally employed to alter the physical and chemical properties of feeds used in pig diets, using hammer/roller mills, pellet mills and extruders/expanders. The reported optimum particle sizes of corn are approximately $500{\mu}m$, $500-700{\mu}m$, $400-600{\mu}m$, for nursery, growing-finishing, and breeder pigs respectively. Optimum particle size of grains are affected by diet complexity. There was a trend towards reducing particle size in order to increase ADG in pigs fed a simple diet, though such was not the case for pigs fed a complex diet. Uniformity of particle size also affects the nutritional values of swine feeds. Uniform particle sizes would consistently give greater nutrient digestibilities. In terms of pellet quality, it is reported that a higher incidence of fmes in pelleted feeds has a direct correlation with poorer feed conversion ratio in pigs. Particle and pellet sizes are also very important for pelleting in terms of grinding, digestibility, stomach ulceration and pellet durability. A particle size of $600{\mu}m$, or slightly less, seemed optimal for com in fmishing pigs, and the 5/32 in. diameter pellets supported the best efficiencies of gain during nursery and finishing phases. Extruder and/or expander processes would allow the feed industry an increased flexibility to utilize a wider spectrum of feed ingredients, and improve pellet quality of finished feeds. It would appear that extruded or expanded diets containing highly digestible ingredients have little effect on the growth performance of pigs, and the feeding values of the feeds over pelleted diets were not improved as pigs grew. The extruder or expander is much more effective than a pelletizer in salmonella control. Gastric ulcerations and/or keratinizations were consistently reported in pigs fed mash and processed diets containing finely ground grains, whereas carcass quality was not affected by diet processing methods such as pelleting, extruding or expanding. In corn- or sorghum-based diets, the electrical energy consumption is 4-5 times higher in the expanding than in the pelleting process. But the expander's processing cost was half of that shown by an extruder. Finally, the decision of which feed processing technology to adopt would depend on the processing cost, and any potential improvement in growth performance and digestibilities of nutrients should offset the increased operating and capital costs related to the extruder/expander technology over mash or pelleting processes in pigs.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권11호
• /
• pp.1738-1745
• /
• 2007

A growth trial and a digestibility trial were conducted to examine the effect of feed particle size on the performance, nutrient digestibility, gastric ulceration and intestinal morphology in pigs fed barley-based diets. Barley was processed through a hammer mill to achieve four diets varying in particle size (average particle $size{\pm}standard $deviation): coarse ($1,100{\pm}2.19\;{\mu}m$), medium ($785{\pm}2.23\;{\mu}m$), fine ($434{\pm}1.70\;{\mu}m$) and mixed (1/3 of coarse, medium and fine) ($789{\pm}2.45\;{\mu}m$). Sixty-four entire male pigs were used in the growth trial and the diets were fed ad libitum between 31 kg and 87 kg live weight. Following slaughter, stomach and ileal tissues were scored for integrity (ulceration or damage) and histological measurements taken. Twenty-four entire male pigs were used in the digestibility trial, which involved total faecal collection. Over the entire growth phase, there were no differences (p>0.05) in average daily gain and feed conversion ratio between pigs fed diets of different particle size. Pigs fed the coarse and medium diets had lower (p<0.05) stomach ulceration scores (0.20 and 0.25, respectively, on a scale from 0 to 3) than those fed the mixed (0.69) or the fine diets (1.87). The stomachs of all animals fed the fine diet had lesions and stomach ulcerations were present only in this group. Pigs fed the fine diet had thicker (p<0.001) ileal epithelial cell layer with no differences (p>0.05) being observed for villous height or crypt depth. Faecal digestibility coefficients of neutral and acid detergent fibre were the highest (p<0.05) for the mixed diet, intermediate for the fine and coarse diets and the lowest for the medium diet. A similar numerical trend (p = 0.103) was observed for the apparent faecal energy digestibility coefficient. It is concluded that, with barley based diets, a variation in average particle size between $400{\mu}m$ and $1,100{\mu}m$ had no effect on pig performance but the fine dietary particle size affected the integrity of the stomach, as well as the structure of the small intestine, thus compromising overall gut health. Our data also demonstrate that changes in particle size distribution during the digestion process, rather than average particle size or particle size variation, are related to apparent faecal digestibility.

• Journal of Korean Society for Atmospheric Environment
• /
• 제16권E호
• /
• pp.47-57
• /
• 2000

This study focuses on the investigation of the effects of windspeed and particle size on the dust control characteristics inside a test dome built in the Port of Inchon to reduce the fugitive dust originating from the handling of animal feed stuff in the open pile area. The flow field inside the test dome and the trajectories of the particles were calculated using a commercial CFD code, FLUENT, assuming that the animal feed stuff handling activity took place inside the test dome. It was found from the simulation results that high windspeed and small particle size give rise to the increase in both the escaped fraction and the suspended fraction of the particles emitted from the animal feed stuff handing activity. Here, high escaped fraction represents the high possibility of fugitive dust problem outside the test dome, whereas high suspended fraction means the high possibility of severe dust pollution inside the test dome. Ore simulation results clearly show that the existing test dome was not designed properly to meet the proposed goal, low escaped fraction and low suspended fraction. Hence, we suggest the need of an efficient ventilation system inside the dome to control the dust.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권4호
• /
• pp.483-490
• /
• 2010

The objectives of this study were to measure particle size and evaluate the effect of increasing alfalfa hay particle size on production characteristics in lactating Holstein dairy cows. Ninety multiparous Holstein cows in early to mid-lactation were randomly assigned in a complete randomized design for a 30-day period. Animals were offered one of the three diets, which were identical in energy, protein, and chemical composition, but differed only in particle size of alfalfa hay. The treatments were A) total mixed ration (TMR) in which only fine chopped alfalfa hay was incorporated in the ration, B) the same diet in which half of the alfalfa hay was fine chopped and incorporated in the mixed ration and half was long hay and offered as a top dressing, and C) the same diet with long hay alfalfa offered as a top dressing. Distribution of particle size of rations was determined through 20,000, 8,000 and 1,000 ${\mu}m$ sieves. The new method of quantitative determination of manure index was examined for each cow on different treatments. The geometric mean length of particle size in the rations was 5,666, 9,900 and 11,549 ${\mu}m$ for treatments A, B and C, respectively. Fat corrected milk (4%), milk fat percentage and production were significantly different (p<0.05) in treatment A versus B and C (fat corrected milk (FCM, 4%)) 28.3 vs. 35.2 and 32.3 kg/d, fat percentage 2.89, 4.04 and 3.62; but the change of ration particle size had no significant effect on milk production (p>0.05). Blood concentration of cholesterol in treatment A was significantly higher (p<0.05) than treatment B and C (181.0 vs. 150.0 and 155.2 mg/dl). Manure index in treatment C was significantly different (p<0.05) from treatment B (15.86 vs. 17.67). Based on these experimental findings, it is concluded that an increase in the ration particle size can increase milk fat percentage due to providing more physically effective fiber, which in turn could effect changes in manure consistency.

• 한국분무공학회지
• /
• 제6권4호
• /
• pp.14-21
• /
• 2001

Rotary atomizer is widely used in practical application ranging from combustion, cooling, spray drying, agriculture, chemical system. Rotary cup atomizer has some advantages such as extreme versatility and liquid atomization successfully varying widely in viscosity. In rotary atomization, the feed liquid is centrifugally accelerated to high velocity and the liquid extends over the rotating surface as a thin film before being discharged into an atmosphere. The degree of rotary atomization depends upon peripheral speed, feed rate, liquid properties and atomizer design. An important asset is that thickness and uniformity of the liquid sheet can readily be controlled by regulating the liquid flow rate and the rotational speed. LDPA(Laser Diffraction Particle Analyser) and image aquisition system are used to measure drop size distribution and spray pattern. The atomization characteristics of the rotary cup atomizer is investigated experimentally by varing the liquid feed rate, rotary cup speed and air velocity for atomization. As a results, the effect of air velocity on the atomization characteristics such as drop size and spray uniformity is considerably greater than variation of those with liquid feed rate.