• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.11a
• /
• pp.263-266
• /
• 2004

An experimental study was carried out on the recovery of ammonium lactate from simulated fermentation brothby desalting electrodialysis (DSED). All experiments, using AM-1 and CM-1 membranes, were operated in a constant current and a subsequent constant-voltage mode, and the switching point was determined based on the previous results. The effects of operating conditions such as operating current, initial feed concentration, and initial feed pH were investigated. Increased operating current resulted in a decreased operating time but an increased energy consumption per unit amount of ammonium lactate recovered. As the initial feed concentration was increased, the operating time increased while energy consumption decreased. The operating time and energy consumption slightly decreased as the initial feed pH was increased up to 6.0. However, no significant influences on the recovery of ammonium lactate were observed over 6.0. The rejections of acetate, glucose, and proteins were $10\%,\;93\%,\;and\;98\%$, respectively. Sulfate was not rejected at all.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.5
• /
• pp.745-754
• /
• 2020

The dye marker Sudan Red 7B was tested as an effective and appropriate marking method for searching the territory of the termite, Reticulitermes speratus, in Korea. The sensitivity of termites to the dye marker was evaluated by measuring the feed consumption amount, survival rate, retention time, and transfer efficiency of R. speratus according to the concentration and feeding period of Sudan Red 7B. As the concentration conditions of dye marker increase, Sudan Red 7B remarkably reduced the feed consumption of the termites. The survival rate was not significantly different from that of the control group (more than 90%), except when feed containing 1% or 2% concentrations of the dye marker was given for five days. The duration of the marking effect persisted for seven days, even at a concentration of 2% dye marker in the feed. No dye transfer by trophallaxis occurred between termites marked with Sudan Red 7B and unmarked termites.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.2
• /
• pp.213-215
• /
• 1994

Poultry feeding systems are likely to change for increased efficiency of production. An experiment was conducted to compare the response of broilers to choice feeding of corn with a standard broiler ration. The treatments consisted of providing broiler feed as the only feed (SINGLE FEED) and access to corn as a choice to a complete broiler feed (CHOICE FEEDING). Weights and feed consumption were obtained at weekly intervals. Samples at the conclusion of the experiment were taken to determine the weight of abdominal fat. Results showed that there was no significant difference in term of liveweight between the two feeding regimes. However, birds given a choice of the broiler feed and corn had better feed efficiency which is reflected by the lower total feed intake. Corn intake was 23.1% of total feed intake in the choice fed birds. In term of carcass colour, birds fed corn as a choice was observed to have a deeper yellow skin colour than the birds fed with broiler feed only.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.4
• /
• pp.56-68
• /
• 2014

This paper presents an experiment on the modeling, analysis, prediction and optimization of machining parameters used during the turning process of the low-carbon steel known as ST40. The parameters used to develop the model are the cutting speed, the feed rate, and the depth of the cut. The experiments were carried out under various conditions, with three level of parameters and two different treatments for each level (with and without a lubricant), to determine the effects of the parameters on the surface roughness and electric current consumption. These effects were investigated using response surface methodology (RSM). A second-order model is used to predict the values of the surface roughness and the electric current consumption from the results of experiments which collected preliminary data. The results of the experiment and the predictions of the surface roughness and electric current consumption under both treatments were found to be nearly identical. This result shows that the feed rate is the main factor that influences the surface roughness and electric current consumption.

• Journal of Veterinary Clinics
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2002

We evaluated the wholesomeness of fish feeds treated with high-dose radiation. This study examined the safety of fish fed treated with high-dose irradiation (5 kGy) and butylated hydroxyanisole (BHA, 200 ppm). 100 flounder (Paralichthys olivaceus) were grouped into 4 and then the fishes fed the following feeds for 28 days: (1)standard feed; (2)standard feed, treated with BHA; (3)standard feed, irradiated to 5 kGy; (4)standard feed, treated with BHA and irradiated to 5 kGy. Four groups each 10 mice were fed the fish feeds same as (1)-(4) for 14 days. There were no observable differences between fishs fed the irradiated feed and those fed the standard feed with respect to growth, feed consumption, haematology and organ histopathology Parameters. There were no deviations in feed consumtion, haematology and organ histopathology parameters in the experiment of mice. We concluded that there were no irradiation-related effects.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.10
• /
• pp.1451-1457
• /
• 2016

A comparative study was performed to investigate the efficacy of KiFAY as a feed additive on performance parameters, thyroid, and pancreatic hormone levels in broilers. Ninety birds (Vencobb 400) were randomly divided into three groups viz., Control (no DL-methionine supplementation), Treatment1 (containing added DL-methionine) and Treatment 2 (containing KiFAY and without DL-methionine supplementation). The performance parameters (weekly body weight, body weight gain, feed intake, and feed consumption ratio) were recorded and calculated during the whole study of 4 weeks. Analyses of insulin and insulin-like growth factor (IGF 1), triiodothyronine (T3), thyroxine (T4) and thyroid stimulating hormone (TSH) were performed at the end of the study. The results show that birds on supplementation of KiFAY performed significantly (p<0.001) better than other treatments. The weekly body weight, body weight gain, feed in-take and feed consumption ratio improved in KiFAY treated birds. The study found an increase in insulin and IGF1 levels (p<0.001) in KiFAY compared with the other treatments. Serum T3, T4, and TSH levels in the Treatment 2 were higher than other treatments (p<0.001). The KiFAY supplementation was able to improve performance with associated responses at a hormonal level in broilers.

• Journal of Biosystems Engineering
• /
• v.26 no.2
• /
• pp.177-188
• /
• 2001

This research was carried out to examine the optimum design conditions of a vertical small-scale milling machine where the rough rice is processed directly into the white rice in one pass. Effects of the main spindle speed, feed screw pitch and ceramic coating length of the roller on various milling characteristics such as white rice processing capacity, electric energy consumption, rice temperature increase, broken rice ratio, moisture reduction, outlet force and crack ratio increase were studied. The results are as follows. 1. The maximum white rice processing capacity and the lowest crack ratio increase, were obtained from a machine with specification: main spindle speed of 970rpm having a feed screw pitch of 19㎜. 2. The minimum electric energy consumption was obtained with the main spindle speeds of 900 and 970rpm respectively having a feed screw pitch of 19㎜. 3. The rice temperature was increased as the feed screw pitch decreased and the main spindle speed increased. 4. Broken rice ratio was relatively low with the range of 0.8∼1.3%. 5. Moisture content loss was with the range of 0.05∼0.4%. 6. The highest outlet force was 0.72kg$\_$f/ with 900rpm of the main spindle speed and 19㎜ of the feed screw pitch and the lowest outlet force was 0.18∼0.34kg$\_$f/ with 970rpm of the main spindle speed and 16㎜ of the feed screw pitch. 7. The optimum design conditions for the vertical small-scale milling machine were obtained at 970rpm of the main spindle speed, 19㎜ of the feed screw pitch and 20㎜ of the ceramics coating length.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.6
• /
• pp.951-955
• /
• 1999

The effects of restricting feed [60% of ad libitum (AL) intake] (FR) or water provided from 0900 h to 1600 h, daily) (WR) or both (FWR) from 14 to 42 days of age on heterophil/lymphocyte (H/L) response and performance in broiler chickens under the hot humid tropical conditions were determined. Feed and/or water limitation retarded growth, but had no adverse effect on overall feed conversion ratio and survivability. The trend for total feed and water consumption was similar to body weight pattern with AL>WR>FR>FWR. The nutritional regimens had significant effect on overall water:feed ratios with FR>(AL=WR)>FWR. Restriction of feed and/or water resulted in marked elevation of H/L ratios. As measured by H/L ratios, the effect of adapting to FR dissipated between 16 to 21 days after the onset of feed restriction. The H/L ratios of WR and FWR birds remained elevated throughout the duration of the experiment.

• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.60-72
• /
• 1981

This study was carried out to find out the effects of the sheaf size of paddy harvested by the binders on the threshing performance, load characteristics and power requirement of an auto-feed thresher. The results of the study are summarized as follows: 1. The seperating performance of the thresher appeared to be satisfactory for all the sheaf sizes although the amount of rubbishes and empty grains slightly increased with the sheaf size of paddy. 2. There was no significant difference in grain output quality of the thresher among the three sheaf sizes. However, the amount of grains left unthreshed increased with the sheaf size. In the case of the largest sheaf size with the feed rate of 780kg/h, it exceeded the limit set by the national inspection regulations. 3. The position of the feed-chain rail gave a significant effect on the power requirement of the thresher. At the feed rate of 780kg/h, the net power required to convey sheafs through the feed chain was in the range of 0.37 to 0.50 PS for the middle and lowest position of feed-chain rail, and there was no significant difference among the sheaf sizes. At the highest position, however, it appeared that the smallest sheaf required more power than the others. The net power requirements at this position were 1.03, 0.59. 0.65 PS for the smallest, medium and largest sheafs respectively. 4. The torques of both the thresher and the engine shaft increased with the feed rate and were not affected by the sheaf size for the lower two feed rates of 520 and 780kg/h. At the highest feed rate of 1,040 kg/h, however, they were affected by the sheaf size. In this case, the medium sheaf size gave lower values than the others. 5. The variations in the thresher and the engine torque increased with the feed rate and were not affected by the sheaf size for the feed rate of 520kg/h. At the feed rate of 780kg/h, however, they increased with sheaf size. And at the feed rate of 1,040 kg/h, the torque variations increased greatly for all the sheaf sizes due to an over-load operating condition. 6. It appeared that the average and maximum power requirements of the thresher increased with the feed rate. But, there was no significant difference in power requirement among the sheaf sizes for the lower two feed rates. 7. The threshing efficiency of the thresher was in the range of 214-249 kg/ps.h with the feed rates of 520 and 780 kg/h, and it was not affected by both the sheaf size and the feed rate. At the feed rate of 1,040 kg/h, however, it decreased to as low as 171-174 kg/ps.h because of a sudden increase in power requirement. 8. The average power requirements of the engine were slightly higher than those of the thresher due to the slippage of flat belt between the thresher and engine. It appeared that power transmission from the engine to the thresher was maintained properly since slippages were moderately low with the range of 2.78 to 6.51% throughout the tests. 9. The specific fuel consumption of the engine (diesel 8PS) decreased as the feed rate increased. However, there was no significant reduction in specific fuel consumption as the feed rate increased above 780 kg/h.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.2
• /
• pp.151-158
• /
• 1995

A study was carried out to investigate the effect of palm oil supplementation on the growth, carcass composition and fatty acid distributions of the broilers fed isonitrogenous and isocaloric diets. This study showed that palm oil supplementation increased feed consumption, weight gain and nitrogen intake. Feed conversion improved at higher fat inclusions, but not significant. Male birds consumed significantly more feed than females resulting in significant increase in energy consumption and weight gain. Increaseing fat content in the ME:P constant diet did not produce significant difference in the fat content of the chicken. Fatty acids content of the diet exert varying effects of the composition and distribution of fatty acids in muscles of the chicken. The fatty acids found in larger amount in the breast and thigh muscles were palmitic, oleic and linoleic. The fatty acids of the breast and thigh muscles were found to correspond the fatty acids of the diets. There were no differences in the fatty acids distribution patterns between the sexes.