• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.470-475
• /
• 2012

The downstream piping system of the water supply system in a supercritical power plant is affected by the fluctuation pressure waves induced by accessing to the acoustic modes of the piping systems with the rotation and impeller passing pulsations of the feed water pump. There are the phenomena amplified at the same time in the range of 415 ~ 455Hz, 830 ~ 910Hz, 1245 ~ 1365Hz and 1660 ~ 1820Hz on the spectrums of the vibration, the sound pressure, and the pressure fluctuation waves.

• 한국기계가공학회지
• /
• 제17권4호
• /
• pp.1-8
• /
• 2018

In drilling Inconel 601, which is used for compressor cases in aircraft engines, a lot of cutting oil must be supplied. This prevents tools from wear and fracture due to the heat buildup resulting from the high-temperature resistance and toughness of this alloy. However, the cutting oil supply has compromised the machining environment. This has caused attention to shift to an environmentally friendly cutting fluid supply system called the Minimum Quantity Lubrication(MQL) system. The aim of this study was to find a more efficient drill processing method using MQL and to verify its performance. To that end, the properties of Inconel that make it difficult -to -drill were studied by a comparison with the drilling of SM45C. Specific factors (i.e., cutting force and tool wear) were examined in relation to the conditions in the MQL-based drilling system. Based on these results, a sealed cover and step feed were proposed as measures to increase the effectiveness of the MQL system. The efficiency of the proposed method was established.

• 한국축산시설환경학회지
• /
• 제21권2호
• /
• pp.47-54
• /
• 2015

Climate change has directly impacted environmentally dependent first industry. The changes of amount and frequency of precipitation have caused unstable drinking water supply for grassland and feed crop, and have changed the variety of grassland and feed crop. Rising temperature has caused heat stress on livestock, which has impacted feed intake and livestock products, and also has threatened to the health of livestock by widening the range of sources of diseases. In order for livestock industry to confront climate change, new technology development for climate change adaptation and measures of greenhouse gas mitigation are essential. Agroforestry is the one of alternative measures to mitigate greenhouse gases and to adapt to climate change. Agroforestry is the way rearing livestock and cultivating plants in forest, which is suitable to Korea where mountain area is over 68%. Feedstock such as maize, soybean, rice, and grass grown by agroforestry would decrease feed cost. Agroforestry will decrease heat stress of livestock during hot weather and will be possible to pasture, which increases livestock welfare.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권5호
• /
• pp.773-788
• /
• 2003

Ostrich farming is a developing industry in most countries in the world, with farm profitability being largely dependent on the quality of the products, especially skins and meat. To produce quality products, it is essential to ensure that nutrient supply matches the nutrient requirements of ostriches during their growth. To achieve this, information on feed utilisation efficiency and nutrient requirements of ostriches at different maturity stages is required. In South Africa, a number of experiments were carried out to assess the nutritive value of feed and to define the nutrient requirement of ostriches. These data were derived from limited number of birds and the direct application of the results to ostrich farming in Australia and other countries is questionable due to the difference in environment and feed resources. Initially ostrich farmers used data from poultry as a guideline for feed formulation, but in recent years more data has become available for ostriches. Ostriches have a better feed utilisation efficiency and a larger capacity of using high fibre feeds such as pastures than poultry. This review revealed that there are a number of areas there further nutritional research and development is required to ensure the ostriches are provided suitable diets to maximise farm profitability. These include the assessment of the nutritive value of feed ingredients for ostrich chicks and adult birds, the determination of nutrient requirements of ostriches under different farming systems, the development of ostrich diet for producing specific product, and grazing management strategies of ostriches in a crop-pasture rotation system.

• 한국수산과학회지
• /
• 제10권4호
• /
• pp.275-279
• /
• 1977

전성장실험기간을 통하여 잉어의 먹이 섭취와 성장 및 사료효율은 스트레이너의 지소회수, 오탁된 사육수의 교환정도, 먹이의 분할공급의 회수, 적량내의 먹이 공급 및 용존산소량에 직접적이고 직각적인 반응을 나타내었다. 그러나 지소나, 물 교환을 위한 취급에는 별로 영향을 받지 않는 것으로 보였다. 특히 해로운 점은 식욕이 왕성하지 못할 때 먹이를 주는 일과 일시에 과량의 먹이는 주는 것이었다. 특히 직각적으로 삼킬 수 있는 량을 주면 물에 녹아나는 것이 거의 없고, 먹이를 준 후에도 물이 투명하지만, 그 이상의 먹이를 주면 식욕이 왕성할 때는 입속에 여분의 먹이를 머금고 삼킬 노력을 함으로써 녹아서 물에 흩어져 나오는 량이 많고, 먹이를 준 후 물이 혼탁해 진다. 그리하여, 여과조를 포함한 사육수질을 악화시키고, 성장이 불량해지고, 또 사료의 효율을 심하게 저하시킨다.

• 한국초지조사료학회지
• /
• 제21권3호
• /
• pp.169-174
• /
• 2001

This study was conducted to investigate the effects of feed resources and collection system of nonconventional agricultural roughages, and reduction of environment pollution by turning non-conventional agricultural roughages to feed resources and diversification of feed supply. And a series of experiment were conducted to determine the effect of moisture control material on quality of sweet potato stalk, peanut stalk, barley straw, the experiments were conducted at Grassland and Forage Crops Division, National Livestock Research Institute, RDA, Suwon in 1999 and 2000. The results obtained from these experiments are summarized as follows; Acid detergent fiber(ADF), neutral detergent fiber(NDF) and total digestible nutrient(TDN) of sweet potato were 38.8, 50.7 and 58.2% in the control silage, but that of rice straw added silage for moisture control were decreased to 41.5, 50.8 and 56.1%. ADF, NDF, CP(crude protein) and TDN of peanut stalk were 42.2, 49.6, 10.5 and 55.6% on the rice straw added silage for moisture control, and there were not affected by barely straw added silage for moisture control. And ADF, NDF and TDN content of barely straw increased 42.8, 65.8 and 55.1% on the water+inoculants treated silage. The results of this study indicate that non-conventional agricultural roughages to feed resources should be make for silage at silo after dry matter percentage(ab0ut 35%) control. Also, rice straw added silage for moisture control will improve the silage fermentation and conservation. (Key words : Feed resources, Non-conventional agriculture, Fermentation, Inoculant, Rice straw)

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.288-293
• /
• 2001

This paper presents the water-hammer effect due to the rapid opening and closing of isolation valve and thruster valve in the spacecraft propulsion system. The single propellant feed system was modeled to investigate the maximum peak pressure due to the water-hammer effect. The test parameters are tank supply pressure, shape and throat length of orifice and line length. Kerosene was used as the inert simulant propellant liquid instead of hydrazine. As downstream line length after isolation valve increased from 1.5 to 2.5m, the maximum line-filling water-hammer peak pressure decreased, but the average time interval between peak pressures increased. The maximum line-filling water-hammer peak pressure with orifice was lower than without orifice, and the maximum line-filling water-hammer peak pressure with orifice at the back of isolation valve was lower than with orifice in front of isolation valve. Without orifice, the maximum water-hammer peak pressure due to the rapid opening and closing of the thruster valve was about 126% of tank supply pressure. With orifice, it decreased. As orifice throat length increased, it decreased. The maximum water-hammer peak pressure due to the rapid closing of the thruster valve with converging-diverging orifice was lower than normal orifice. It was found that the orifice as a means of pressure drop was very effective to reduce the water hammer peak pressure at the thruster valve. The results of this study can be used for the design of spacecraft liquid propulsion feed system.

• 한국수산과학회지
• /
• 제32권5호
• /
• pp.654-658
• /
• 1999

패류 인공종묘생산시 양질의 먹이를 원활하게 공급하기 위하여 장기간 보관이 가능한 건조먹이를 생산하여, 굴 유생을 대상으로 이용 가능성을 조사하였다. 이를 위하여 건조먹이의 생화학성분과 지방산 조성을 분석한 결과, 생화학성분 조성은 생먹이 및 농축먹이와 차이가 없었다. 지방산 조성은 건조먹이가 생먹이보다 PUFA DHA 및 EPA의 비율이 높았으며 (p<0.05) 특히 EPA는 생먹이보다 7.35배 높았다. 농축먹이에 건조먹이를 비율별로 혼합하여 굴 유생을 15일간 사육한 후 유생의 생존율과 지질 함량을 분석한 결과, 건조먹이를 $30\%$까지 혼합하여 사용하여도 생먹이만을 공급한 것보다 굴 유생의 생존율이 향상되었으며, 그중 건조먹이를 $10\%$ 혼합하여 사육하면 생먹이만으로 사육한 것보다 생존율이 2.1배 향상되었다(p<0.05) 15일째 굴 유생의 지질 함량은 건조먹이를 $10\%$ 혼합하여 사육한 경우 생먹이만을 공급한 것보다 약 1.6배 높았다. 따라서 패류의 종묘를 생산하지 않는 시기에 먹이생물을 배양하여 건조먹이 형태로 보관하여 두었다가, 농축먹이와 혼합하여 사용한다면, 보다 간편하게 먹이를 공급할 수도 있으며 아울러 유생의 생존율도 향상시킬 수 있을 것으로 기대된다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.93-96
• /
• 2015

Commercial coal gasifiers typically use entrained flow type reactors, but have unique features in terms of reactor shape, gasifying agent, coal feeding type, ash/slag discharge, and reaction stages. The MHI gasifier is characterized as air-blow dry-feed entrained reactor, which incorporates a short combustion stage at the bottom and a tall gasification stage above. This study investigates the flow and reaction characteristics inside a MHI gasifier by using computational fluid dynamics (CFD) in order to understand its design and operation features. For its pilot-scale system at 200 ton/day capacity, the distribution of coal and air supply between the two reaction stages was varied. It was found that the syngas composition and carbon conversion rate were not significantly influenced by the changes in the distribution of coal and air supply. However, the temperature, velocity and flow pattern changed sensitively to the changes in the distribution of coal and air supply. The results suggest that one key factor to determine the operational ranges of coal and air supply would be the temperature and flow pattern along the narrower wall between the two reaction stages.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.195-199
• /
• 2015

Many conventional management methods have emphasized the minimization of required resources along the supply chain. Accordingly, this paper presents a proposed method called the Virtual Design and Construction (VDC)-aided system. It is based on object-oriented resource control, in order to accomplish a feed-forward control monitoring supply chain logistics. The system is supported by two main parts: (1) IT-based Technologies; and (2) VDC Models. They enable the system to convey proactive information from the detection technology to its linked visualization. The paper includes a field study as the system's pre-test: the Scaffolding Works in a LNG Mega Project. The study demonstrates a system of real-time productivity monitoring by use of the RFIDbased Mobile Information Hub. The on-line 'productivity dashboard' provides an opportunity to display the continuing processes for each work-package. This research project offers the observed opportunities created by the developed system. Future work will entail research experiments aimed towards system validation.