• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1554-1560
• /
• 2000

Ninety-six crossbred (Large White${\times}$Landrace${\times}$Duroc) pigs, weaned at 35 days of age, were assigned to four dietary treatments in order to investigate the effects of oral antibiotics on the performance and the intestinal microflora of weanling pigs. Pigs were fed either a basal diet, without antibiotics, or the basal diet plus either 50 ppm acetylspiramycin, 50 ppm olaquindox, or 100 ppm bacitracin zinc. The pigs were housed eight per pen with three pens per treatment in an environmentally controlled nursery. Ten days after weaning, three pigs from each treatment were slaughtered and intestinal pH, microflora, and volatile fatty acid concentration were determined. At the end of the 4 week trial, the remaining pigs were weighed and feed consumption was measured. Average daily gains for pigs fed acetylspiramycin, olaquindox, bacitracin zinc and the control diet were 0.43, 0.40, 0.37, and 0.34 kg per day (p=0.001), respectively. Antibiotic addition did not modify feed intake, but acetylspiramycin improved feed conversion (p=0.003). In comparison with the control, acetylspiramycin significantly increased Bifidobacteria numbers in the jejunum (p=0.082) and ileum (p=0.014) and decreased total bacterial counts throughout the intestine (p<0.01 except for the ileum where p=0.079). Acetate production was significantly lower in the cecum (p=0.028) and colon (p=0.079) of pigs fed acetylspiramycin. In addition to increasing numbers of Bifidobacteria in the jejunum (p=0.082) and ileum (p=0.014), olaquindox increased Lactobacillus in the jejunum (p=0.004) and decreased E. coli in the colon (p=0.022). Bacitracin zinc increased Lactobacillus numbers in the jejunum (p=0.004) and Bifidobacterium concentrations in the jejunum (p=0.082) and ileum (p=0.014).

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.10
• /
• pp.1456-1463
• /
• 2011

A total of 629 Duroc${\times}$Landrace${\times}$Large White crossbred pigs were utilized in three experiments (Exp. 1, 222 pigs weighing $25.6{\pm}2.0\;kg$ BW; Exp. 2, 216 pigs weighing 5$6.2{\pm}4.3\;kg$ BW; Exp. 3, 191 pigs weighing $86.4{\pm}4.6\;kg$ BW) conducted to determine the effects of fermented potato pulp on performance, nutrient digestibility, carcass traits and plasma parameters in growingfinishing pigs. Each experiment lasted 28 d. The pigs were assigned to one of two corn-soybean meal-based diets containing 0 or 5% fermented potato pulp. The inclusion of fermented potato pulp increased weight gain (p<0.05) in experiments 1 and 2 and increased feed intake (p<0.05) in experiment 2. Feed conversion was improved (p<0.05) in experiment 2 and showed a tendency to improve (p<0.10) in experiments 1 and 3 when pigs were fed fermented potato pulp. Fermented potato pulp increased (p<0.05) dry matter digestibility in experiments 1 and 3 and energy digestibility in experiment 2. Feeding fermented potato pulp decreased plasma urea nitrogen (p<0.05) and alanine aminotransferase (p<0.05) in experiments 1 and 2, while plasma aspartate aminotransferase was decreased (p<0.05) in experiment 3. Dietary fermented potato pulp did not affect the carcass characteristics of finishing pigs. Feeding fermented potato pulp reduced (p<0.05) fecal ammonia concentration in all three experiments. In conclusion, feeding growing-finishing pigs diets containing 5% fermented potato pulp improved weight gain and feed conversion without any detrimental effects on carcass traits. The improvements in pig performance appeared to be mediated by improvements in nutrient digestibility.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.872-877
• /
• 2002

Two experiments were conducted to determine the effects of reducing particle size of corn from 1,000 to 500 ${\mu}m$ in simple and complex diets for nursery pigs and broiler chicks. In Exp 1., 192 nursery pigs were used in a 24 d growth assay. Treatments were: 1) 1,000 ${\mu}m$ corn in a simple diet; 2) 500 ${\mu}m$ corn in a simple diet; 3) 1,000 ${\mu}m$ corn in a complex diet; and 4) 500 ${\mu}m$ corn in a complex diet. Overall, pigs fed complex diets had 9% greater ADG (p<0.005) and 5% greater gain/feed (p<0.01) compared to pigs fed simple diets. Also, pigs fed the 500 ${\mu}m$ treatments had 3% better overall gain/feed than those fed the 1,000 ${\mu}m$ treatments (p<0.007). At d 9, apparent digestibilities of DM, N and GE were greater for complex diets and diets with smaller particle size (p<0.02). At d 23, there were no differences in nutrient digestibility resulting from diet complexity, but pigs fed diets with corn ground to 500 ${\mu}m$ had greater digestibility of DM (p<0.02) and GE (p<0.003) than pigs fed diets with corn ground to 1,000 ${\mu}m$. A second experiment was designed to determine if four days old broiler chicks were an acceptable model for predicting the effects of feed processing procedures on nursery pigs. Chicks fed complex diets had 3% greater gain/feed than chicks fed simple diets (p<0.001). Rate of gain and feed intake were improved by 3 and 2%, respectively, for chicks fed crumbled diets (p<0.03). However, there were several significant interactions among the main effects. For instance, crumbling did not affect gain/feed in chicks fed complex diets, but rate of gain and feed intake were increased by 7 and 6%, respectively, when simple diets were crumbled (diet complexity${\times}$diet form, p<0.001). Also, gain/feed of chicks was improved by 3% when particle size was reduced in meal diets, but not affected in chicks fed crumbles (diet form${\times}$particle size, p<0.005). Thus, our data suggested that reduction of particle size of corn was important for simple and complex diets and that a complex diet with 1,000 ${\mu}m$ corn gave no better performance than a simple diet with 500 ${\mu}m$ corn.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.157-163
• /
• 2012

Internet Data Centers (IDCs), which are essential facilities in the modern IT industry, typically have scores of MW of concentrated electric loads. The provision of an Uninterruptible Power Supply (UPS) is necessary for the power feed system of IDCs owing to the need for stable power. Thus, conventional IDC AC power feed systems have three cascaded power conversion stages, (AC-DC), (DC-AC), and (AC-DC), resulting in a very low conversion efficiency. In comparison, DC power feed systems require only a single power conversion stage (AC-DC) to supply AC main power to DC server loads, resulting in comparatively high conversion efficiency and reliability [4-11]. This paper compares the efficiencies of a 220V AC power feed system with those of a 300V DC power feed system under equal load conditions, as established by the Mok-Dong IDC of Korea Telecom Co. Ltd. (KT). Experimental results show that the total operation efficiency of the 300V DC power feed system is approximately 15% higher than that of the 220V AC power feed system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.5
• /
• pp.571-575
• /
• 1996

An experiment was conducted to measure the true metabolizable energy (TME) values of seven major poultry feed ingredients, two feed concentrates and one randomly collected layer mixed feed prepared from the available feed ingredients. The results of this study were the most thorough evaluation of the TME content of some selected common feed ingredients of Bangladesh. The observed TME values of some feed ingredients were very close to the values of different origins of feed ingredients. But the TME values measured in mixed layer feed were very low which could not support the standard requirement of laying birds. There values will be of assistance in describing the energy content of the most common available feed ingredients of Bangladesh.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.1
• /
• pp.28-35
• /
• 2018

Front End Engineering Design (FEED), currently dominated by a few advanced countries, creates the highest added-value in the in plant construction industry. In the domestic plant engineering industry, it is difficult to acquire its own technology capability and experience due to lack of experience and shortage of experts in advanced design fields such as basic design and FEED. To achieve competitiveness with the advanced countries, it is necessary to establish smart training system for advanced plant design and FEED engineers. This study aims to design an integrated training framework for plant engineering and FEED using system engineering to build a smart plant engineering education system that learns design knowledge based on educational content and experience based on design stage for chemical plant.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.1
• /
• pp.59-67
• /
• 2022

Dietary fiber is considered a feed ingredient with high nutritional value in the broiler feed industry. Pine chips contain a large amount of dietary fiber and require some modification for use as broiler feed. In this study, pine chips were subjected to steam explosion under different severity factor (Ro) conditions to improve the chemical and physical properties of dietary fiber. The highest water-holding capacity, oil-holding capacity, and swelling capacity were found for Ro 4.0, followed by Ro4.5 and 3.5. The optimal condition for the steam explosion was determined to be Ro 4.0 (reaction temperature of 210℃, and reaction time of 6.0 min). Under these conditions, the water-holding capacity, oil-holding capacity, and swelling capacity of steam-exploded pine chips were 8.3 g/g, 6.5 g/g, and 5.0 mL/g, respectively. This study may contribute to the application of lignocellulose and related products in the broiler feed industry.

• Journal of the Korean Society of Industry Convergence
• /
• v.11 no.2
• /
• pp.83-91
• /
• 2008

GMAW(Gas Metal Arc Welding) processes are usually used in industrial side in order to get its high productivity. But those are only adopted in the semi-automated welding equipment because of a lot of welding spatters. Many industrial robot actually percents from being engaged in the welding processes. The welding spatter problem of causes blocking them being a fully automated welding process.This study was carried out to investigate the optimal conditions for minimizing welding spatter generation at GMAW robot. The spatter can be significantly reduced below 2% of welding spatter generation at the following conditions ; First, below 18V at the wire-feed rate 2.0mm/min Second, below 23V at the wire-feed rate 3.6mm/min Third, below 24V at the wire-feed rate 5.5mm/min.

• Plant Journal
• /
• v.13 no.2
• /
• pp.39-45
• /
• 2017

This paper is a study on FEED validation model that can be used in the bidding stage of small utility equipment in offshore plant industry using system engineering technique. Currently, domestic marine plant equipment industry companies are faced with the financial risk of project execution as they enter marine plant. The major cause was the insufficient ability to verify the FEED output from the contractor (Engineering or Procurement and Construction) of the equipment manufacturer (COMPANY or EPC). Therefore, we propose FEED design verification method that simplifies the system engineering method that sequentially applies requirements analysis, function, performance analysis and physical architecture building process. Also, we verified the suitability of the developed model by comparing the results of applying the developed FEED verification model and the verification method that depends on the existing experience for the small utility equipment (Air Compressor).

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.282-289
• /
• 2003

Animal feed additives are used worldwide for many different reasons. Some help to cover the needs of essential nutrients and others to increase growth performance, feed intake and therefore optimize feed utilization. The health status of animals with a high growth performance is a predominant argument in the choice of feed additives. The use of feed additives is more and more questioned by the consumers. Therefore, the feed industry is highly interested in valuable alternatives which could be accepted by the consumers. Probiotics, prebiotics, enzymes and highly available minerals as well as herbs can be seen as alternatives. Herbs, spices and their extracts (botanicals) have a wide range of activities. They can stimulate feed intake and endogenous secretions or have antimicrobial, coccidiostatic or anthelmintic activity. A major field of application of herbs is the protection of animals and their products against oxidation.