• 한국추진공학회지
• /
• 제4권2호
• /
• pp.6-11
• /
• 2000

고압의 불활성 기체를 이용하여 엔진에 추진제를 공급하는 액체로켓의 경우, 추진제 탱크의 압력은 정상연소상태의 연소압을 기준으로 하여 설계한다. 그러나 연소초기의 연소실 압력은 대기압 상태이므로 과도한 유량이 공급되어 이로 인해 hard-start가 발생하며, 최악의 경우 엔진의 파손을 가져온다. 본 연구에서는 이러한 문제를 해결하고 안정된 연소를 위하여 개선된 추진제 공급시스템을 제안하며, 이는 실제 연소실험을 통해 그 성능을 규명하였다. 이 공급시스템은 연소초기의 급격한 연소실압의 상승을 막기 위하여 추진제를 예연소단계와 주연소단계의 2단계로 공급하며, 연소초기 및 연소 중의 일정한 유량공급을 위해 Cavitating Venturi를 사용하는 시스템이다. 설계 유량보다 적은 양의 추진제를 먼저 공급하여 연소압이 일정수준에 달하도록 예연소압을 형성하게 하는 방법이다. 또한, Cavitating Venturi는 오직 공급압에 의해서만 유량이 결정되며, 출구 압에 영향을 받지 않으므로 연소초기는 물론이고, 연소 중 이상연소에 의해 연소압이 떨어져도 설계치 이상의 유량이 공급되지 않는다.

• 한국수산과학회지
• /
• 제46권5호
• /
• pp.546-551
• /
• 2013

This study examined the effects of the dietary inclusion of Porphyra and sea tangle Laminaria japonica on the growth, feed utilization, body composition, and plasma chemistry of juvenile Korean rockfish Sebastes schlegeli. Eight hundred and forty juvenile fish averaging 5.0 g were allocated 40 fish per tank to 21 180-L flow-through tanks. Seven experimental diets were prepared: control (Con) without additive, 0.5 and 1% Porphyra extract (PE), 3% Porphyra powder (PP), 0.5 and 1% sea tangle extract (STE) and 3% sea tangle powder (STP), referred to as PE-0.5, PE-1, PP-3, STE-0.5, STE-1, and STP-3, respectively. Each additive was included in the experimental diet at the expense of the same amount of wheat flour. Each experimental diet was fed to triplicate groups of fish. The experimental diets had no effect on the survival, weight gain or specific growth rate of the fish, feed consumption, feed efficiency ratio, protein efficiency ratio, protein retention, hepatosomatic index, condition factor, moisture or crude protein content of the entire body excluding the liver or moisture, crude protein or crude lipid content of the liver. None of the plasma parameters were affected by the experimental diets. Based on these results, the dietary inclusion of Porphyra and sea tangle did not affect the growth, feed utilization, body composition or plasma chemistry of juvenile Korean rockfish.

• 한국수산과학회지
• /
• 제41권2호
• /
• pp.125-133
• /
• 2008

To investigate the effect of repeated food deprivation and refeeding on the hyperphagia, compensatory growth, feed efficiency, body composition, hepatosomatic index (HSI), and survival rate of the juvenile olive flounder Paralichthys olivaceus, an experiment was conducted for 90 days. Feeding treatments consisted of the following five regimes for 90 days from August to October, 2005: C: daily satiation feeding (control), S1: 1-day satiation feeding after 1-day food deprivation, S2: 1-day satiation feeding after 2-day food deprivation, S3: 1-day satiation feeding after 3-day food deprivation and S4: 1-day satiation feeding after 4-day food deprivation, respectively. Although the monthly feed intake (MFI) of the control was significantly higher than that of all of the starved groups, the daily feed intake (DFI) was more higher in S1, S2, and S3 than that in the control as a result of hyperphagia after starvation. While the feed efficiency in the summer (to day 30) decreased in all of the starved groups with prolongation of the starvation period, the feed efficiency in the autumn (to day 90) was increased with prolongation of the starvation period. The whole body proximate composition and HSI were also affected by starvation. The crude protein, lipid, and HSI decreased with prolongation of the starvation period, whereas the crude ash and moisture increased. The growth rate and condition factor also decreased in proportion to the starvation period. The survival rate was highest in the control and was the lowest in S4. In this study, although hyperphagia occurred in the deprived groups, we knew that the compensatory growth did not always occur.

• 한국응용과학기술학회지
• /
• 제35권4호
• /
• pp.1230-1242
• /
• 2018

곰팡이독소는 곰팡이의 2차 대사산물로 동물용 원료사료 중에서 특히 곡물 및 곡물부산물에서 가장 흔하게 발생한다. 돼지는 곰팡이독소에 대한 감수성이 다른 동물에 비해 높은 것으로 알려져 있다. 아플라톡신, 디옥시니발레놀 및 제랄레논은 동물용 원료사료에서 가장 흔하게 발생하는 곰팡이독소이며, 국내 외에서 허용기준을 설정하여 관리하고 있다. 곰팡이독소는 종류에 따라 서로 다른 독성작용을 가지지만 모두 면역체계를 표적으로 하며, 최종적으로 돼지의 성장저하를 초래한다. 따라서 곰팡이독소에 의한 피해를 최소화하기 위한 다양한 대책이 필요하다. 일반적으로 곰팡이독소에 오염된 사료를 섭취한 돼지는 사료섭취량이 감소하며, 그 결과 증체량 저하가 발생한다. 사료섭취량 감소로 인한 필수영양소의 불충분한 공급은 영양소함량을 강화시킨 사료를 급여함으로써 증체량 감소를 최소화할 수 있다. 또한 곰팡이독소 저감제를 이용하여 곰팡이독소에 의한 피해를 저감시킬 수 있으나, 곰팡이독소의 종류 및 농도, 환경적 요인, 저감제의 종류 등에 따라 저감제 사용 효과에 대한 변이가 존재한다.

• Fisheries and Aquatic Sciences
• /
• 제24권6호
• /
• pp.219-227
• /
• 2021

The effects of various feeding ratios on the growth, body composition, and blood chemistry of the juvenile mandarin fish Siniperca scherzeri (initial body weight 9.6 g) were examined in recirculating freshwater system equipped with 21, 300 L tanks at 20 fish per tank. The triplicate groups of seven feeding ratios treatments were prepared: 100% (control), 95%, 90%, 85%, 80%, 75%, and 70% of satiation. The feed amount of control group was determined by supplying with apparent satiation and then the feed amounts of the other six feeding groups were determined based on the feed amount of the control group. Fish were hand-fed with test diet (55.4% crude protein) for 10 weeks. Weight gain (WG) and specific growth rate of fish fed to 100% satiation were not significantly (p > 0.05) different from those of fish fed to ≥ 80% satiation but were significantly higher than those of fish fed to 75% and 70% satiation. Feed efficiency, protein efficiency ratio, and protein retention of 100% satiation were not significantly different from those of 95% and 90% satiation but were significantly (p <0.05) lower than ≤ 85% satiation. Condition factor, hepatosomatic index, and coefficient variation were not significantly (p > 0.05) affected by feeding ratio. Whole body composition and contents of hematocrit, glutamic oxaloacetic transaminase, glutamic pyruvic transaminase, glucose, total protein, and high-density lipoprotein cholesterol in blood serum were not significantly (p > 0.05) affected by the feeding ratio; however, content of total cholesterol tended to decrease as the feeding ratio decreased. Using broken-line analysis of WG, it was suggested that the optimum feeding ratio of juvenile mandarin fish, ranging from 9.0 g to 37.0 g, appeared to be 87.7% of satiation without growth inhibition.

• 한국수산과학회지
• /
• 제42권3호
• /
• pp.262-267
• /
• 2009

Two 15-week feeding trials were conducted to investigate feeding rate and feeding frequency for growth of sub-adult flounder in suboptimal water temperature ($12^{\circ}C$). In the first experiment, duplicated groups of fish (initial mean weight of 279 g) were fed a extruded pellet once a day at the different feeding rates of 0.1, 0.15, 0.2, 0.3% body weight per day (BW/d), and satiation (0.32% BW/d). Weight gain and feed efficiency were increased significantly (P<0.05) with increase in feeding rates from 0.1 to 0.3% BW/d, but there were no significant differences in weight gain and feed efficiency of fish fed the diet between 0.3% BW/d and to satiation. Crude protein content of dorsal muscle of fish fed the 0.1% BW/d diet was significantly (P<0.05) lower than that of the other groups. In the second experiment, duplicated groups of fish (initial mean weight of 281 g) were fed to apparent satiation with a extruded pellet at three different feeding frequencies (one meal every two days, one meal a day and two meals a day). Weight gain, feed efficiency and condition factor of fish fed one meal every two days were significantly (P<0.05) lower than those of fish fed one meal and two meals a day, but there were no significant differences in weight gain, feed efficiency and condition factor of fish fed between one meal and two meals a day. Based on the results of this study, optimum feeding frequency is one meal a day with satiation feeding for growth and feed efficiency of sub-adult flounder (270-350 g) in suboptimal water temperature ($12^{\circ}C$).

• 한국생산제조학회지
• /
• 제5권2호
• /
• pp.46-56
• /
• 1996

Drilling tests were carried out austempered ductile castiron(ADI) to clarify the factors influencing the drilling characteristics of ADI material. The machinability of material was evaluated using high speed steel drill and cobalt contained drill of 6mm diameter. The spheroidal graphite cast iron materials were austenized at 90$0^{\circ}C$ for 1 hour and then wear was kept at 375$^{\circ}C$ for 2 hours. Austempered ductile cast iron contains a great deal of retaine austenite which contributes to an improvement of impact strength, In this paper, machinability of ADI was investigated by drilling experimentation. The results obtained are as follows: a)Flank wear increases logarithmically with the increases of cutting time. b) Relation of flank wear and cutting force can be appiled to $F_z$ = 925VB + 820 for the cutting suggested condition. c) Drilling hole number of about 2 times can be reduced more step feed than ordinary feed due to the high hardness of ADI material and hardness increasing ascribed to the martensite of retained austenite.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.139-149
• /
• 2001

The effects of the cutting conditions on the surface roughness of workpiece in turning were studied in this paper. The workpieces made of carbon steel SM20C and SM45C were tamed without the support of the tailstock center. Cutting conditions were changed in three or flour steps in each parameter and cutting fluid was used. The surface roughness results of tests were measured and the effects of the cutting conditions were analyzed by the method of analysis of variance. The summary of the experimental research is as follows. The main parameters were cutting speed, fred-rate, depth of cut, and the interactions between speed and fled-rate, speed and depth of cut, and fred and depth of cut. As cutting speed increased, surface roughness showed lower value. The surface roughnesses of feed-rate 0.102 mm/rev and 0.147 mm/rev were better than those of feed-rate 0.05 mm/rev and 0.2 mm/rev.

• 한국정밀공학회지
• /
• 제31권10호
• /
• pp.905-911
• /
• 2014

A Loss-in-Weight (LIW) feeder, a type of automated measuring device, is a continuous feeder used in many mass production industries. Due to its versatility, there have been constant demands of LIW feeders in food production supply lines as well as chemical and pharmaceutical industries. In this paper, the process of designing a LIW feeder system with better performance will be examined and compared with commercial products. This system is characterized by low pass Butterworth filter and feed forward PI control. The filter is for noise disposal caused by dynamic condition of a LIW feeder. The feed forward PI control, based on linearity feature of feeders, is adequate for stable driving of the system. At the end, a possible evaluation method of LIW system will be proposed to verify the specific achievement of this paper.

• Journal of Biosystems Engineering
• /
• 제20권3호
• /
• pp.250-261
• /
• 1995

This study has been performed to develop an agricultural waste incinerator to combust the rice hull originated from RPC with the typical disposal treatment capacity of 30kg/h and to test performance of the developed incinerator. Experimental results are summarized as following. 1. The optimum feed rate of rice hull of the incinerator is 30kg/h with air ratio of 1.5. 2. The contents of $SO_2$ in flue gas is maximum 18ppm(when rice hull feed rate was 20kg/h and air ratio of 1.5), minimum 7ppm(when rice hull feed rate was 30kg/h and air ratio of 1.5) and average 11ppm. So there is no environmental pollution problem for the incinerating treatment of rice hull of the RPC. 3. The temperature of water of heat exchanger are $53^{circ} C$ and $62^{circ} C$ with water flow rate $3{ell}/min$ and $1.5{ell}/min$ at the optimum combustion condition, respectively. 4. According to theoretical energy calculation, the energy from rice hull combustion may be amounted as much as 80%~190% of energy supplied by kerosene required by RPC.