• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.10
• /
• pp.470-476
• /
• 2005

In this paper PU control scheme is presented. The proposed scheme has following features. The one is oft-starting method which is used for preventing to flow large current in motor phase winding when motor starts. The ther is the selection of the level of the over current. The first feature is implemented by increasing the PWM duty lowly, the second feature is implemented by limiting the magnitude of the phase current level by which the over heat f motor by copper losses and magnetic saturation decreases. By the analysis using FEM considering load condition, the peed of mode transition from PW to single pulse control is selected and confirmed by simulation that there is no ver current occurs during the mode transition. For the verification of proposed scheme, the simulation using MATLAB Simulink with considering non-linearity of inductance profile from FEM analysis is performed and the experiment with SRM drive system which has the DSP controller and single Phase SRM are peformed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1581-1584
• /
• 2003

This paper proposed efficient manufacturing system using OMM(on-machine measurement) system and OMM operating S/W based 3D modeler. A Developed program connected tool machine with RS232C. It is composed two operating system that touch probe operating and laser displacement sensor operating system. A program for touch probe possible measure considered inspection feature and CAD data. The laser operating program is used inspection for profile. very small hole using installed feature data. This system is applied manufacturing line of mold(cavity, core) also verification of efficiency manufacturing process that production, reduction machining error of each process

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.12
• /
• pp.2110-2117
• /
• 2003

A physics-based material removal model in various scales is described and a feature scale simulation for a chemical mechanical polishing (CMP) process is performed in this work. Three different scales are considered in this model, i.e., abrasive particle scale, asperity scale and wafer scale. The abrasive particle and the asperity scales are combined together and then homogenized to result in force balance conditions to be satisfied in the wafer scale using an extended Greenwood-Williamson and Whitehouse-Archard statistical model that takes into consideration the joint distribution of asperity heights and asperity tip radii. The final computation is made to evaluate the material removal rate in wafer scale and a computer simulation is performed for detailed surface profile variations on a representative feature. The results show the dependence of the material removal rate on the joint distribution, applied external pressure, relative velocity, and other operating conditions and design parameters.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.132-134
• /
• 2006

To improve equipment throughput and device yield, a malfunction in plasma equipment should be accurately diagnosed. A recognition model for plasma diagnosis was constructed by applying neural network to scanning electron microscope (SEM) image of plasma-etched patterns. The experimental data were collected from a plasma etching of tungsten thin films. Faults in plasma were generated by simulating a variation in process parameters. Feature vectors were obtained by applying direct and wavelet techniques to SEM Images. The wavelet techniques generated three feature vectors composed of detailed components. The diagnosis models constructed were evaluated in terms of the recognition accuracy. The direct technique yielded much smaller recognition accuracy with respect to the wavelet technique. The improvement was about 82%. This demonstrates that the direct method is more effective in constructing a neural network model of SEM profile information.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.4
• /
• pp.263-270
• /
• 2001

In stamping-die manufacturing, the first step is to build die patterns for lost wax casting process. A recent industry trend is to manufacture the die pattern using 3-axis NC machining. This study identifies technical considerations of the pattern machining caused by the characteristics of Styrofoam material, and proposes technical methods related to establishing a process plan and generating tool paths for optimizing the pattern machining. In this paper, the process plan includes the fellowing three items: 1) deter-mining a global machining sequence-a sequence of profile, top, bottom machining and two set-ups, 2) extracting machining features from a pattern model and merging them, and 3) determining a machining sequence of machining features. To each machining feature, this study determines the machining start point, generates the approach tool path, and proposes a tool path linking method fur reducing the distance of the cutter rapid motion. Finally, a smooth tool path generation and an automatic feedrate adjustment (AFA) method are introduced far raising the machining efficiency.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.6
• /
• pp.345-359
• /
• 2011

In high performance embedded systems, the use of multiple on-chip memories is an essential architectural feature for exploiting inherent parallelism in multimedia applications. This feature allows multiple data accesses to be executed in parallel. However, it remains difficult to effectively exploit of multiple on-chip memories. The successful use of this architecture strongly depends on how to efficiently detect and exploit memory parallelism in target applications. In this paper, we propose a technique based on a linear array access descriptor [1], which is generated from profiled data, to detect and exploit memory parallelism. The proposed technique tackles an array reorganization problem to maximize memory parallelism in multimedia applications. We present preliminary experiments applying the proposed technique onto a representative coarse grained reconfigurable array processor (CGRA) with multimedia kernel codes. Our experimental results demonstrate that our technique optimizes data placement by putting independent data on separate storage. The results exhibit 9.8% higher performance on average compared to the existing method.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.29.4-30
• /
• 2009

Extra-tidal feature of the globular clusters such as tidal tails and halos can be a crucial evidence of the merging scenario of the Galaxy formation in the dynamical point of view. To search for such an extra-tidal feature of globular clusters located in the Galactic bulge(RGC<3kpc), we obtained wide-field near-infrared JHKs images of 6 metal-poor ([Fe/H]<-1.0) clusters and 3 metal-rich ([Fe/H]>-1.0) clusters. Observations were carried out using IRSF 1.4m telescope and SIRIUS near-infrared camera, during 2006~2007. The obtained images have a total maximum field-of-view of ~ $21'\times 21'$. To select clusters' member stars and minimize the field star contaminations, we applied CMD masking algorithm. Smoothed surface density contour maps with selected stars for each cluster show overdensity features around the tidal radius and beyond. Also, radial surface density profiles within the tidal radius of the clusters show an overdensity feature as a change of slope of the radial profile. The results add further observational constraints of the formation of the Galactic bulge.

• ETRI Journal
• /
• v.44 no.1
• /
• pp.38-50
• /
• 2022

This paper presents a study on the use of encoder-derived features in decoder-side depth estimation. The scheme of multiview video encoding does not require the transmission of depth maps (which carry the geometry of a three-dimensional scene) as only a set of input views and their parameters are compressed and packed into the bitstream, with a set of features that could make it easier to estimate geometry in the decoder. The paper proposes novel recursive block splitting for the feature extraction process and evaluates different scenarios of feature-driven decoder-side depth estimation, performed by assessing their influence on the bitrate of metadata, quality of the reconstructed video, and time of depth estimation. As efficient encoding of multiview sequences became one of the main scopes of the video encoding community, the experimental results are based on the "geometry absent" profile from the incoming MPEG Immersive video standard. The results show that the quality of synthesized views using the proposed recursive block splitting outperforms that of the state-of-the-art approach.

• Journal of Environmental Science International
• /
• v.1 no.2
• /
• pp.93.2-97
• /
• 1992

The naturally occurring plasmids of Vibrio species have been isolated in part to investigate their genetic traits. Among six different Vibrio species tested, Vibrio anguillarum, Vibrio fluvialis, Vibrio vulnificus, Vibrio mimicus and Vibrio furnissi did not show any presence of plasmid. One environmental isolate of Vibrio pnrahemolyticus harboring plasmid was observed. The isolated plasmid was 8.7 kb by analysis with restriction endonuclease digestion. No common feature was shown relationships between the presence of plasmid and resistance against commonly used antibiotic compounds from the tested Vibrios. Key words . plasmid, Vibrio anguillarum, Vibrio fluvialis, Vibrio uulnincus, Vibrio mimicus, Vibrio furnissi, Vibrio parahemolyticus.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10a
• /
• pp.786-790
• /
• 1987

This paper describes a systein which enables a fast 3 -dimensional profile measurement using a slit-ray projection method. One distinctive feature of this system is that a real-time video is processor is employed in order to reduce the amount of image data to be processed without eliminating essential information. Experimental results show that a calibrating method presented for the TV camera and the slit-ray projector is convenient and enables sufficient accurate measurements.