• 한국주조공학회지
• /
• 제15권3호
• /
• pp.252-261
• /
• 1995

The purposes of this study were to investigate the microstructural changes in alloy ribbons of Al-Fe-Mo-Si quarternary system at $450{\sim}500^{\circ}C$, and to study the coarsening mechanism of fine precipitates. Using the hot stage in TEM, in situ microstructural changes in Al-4Fe-0.5Mo-1.5Si alloy ribbon and Al-8Fe-2Mo-1.5Si alloy ribbon have been examined successively up to 60 hours at $450^{\circ}C$ and $500^{\circ}C$. Cell structure in zone B of Al-4Fe-0.5Mo-1.5Si alloy ribbon was observed to collapse even in 10 minutes by in-situ heating at $450^{\circ}C$ and the size of precipitates in zone B increased twice in 60 hours. The precipitates in zone A of Al-4Fe-0.5Mo-1.5Si alloy ribbon showed slower coarsening rate than those in zone B by in-situ heating at $450^{\circ}C$. The precipitates in zone A of Al-8Fe-2Mo-1.5Si alloy ribbon increased 50% by in-situ heating at $500^{\circ}C$ in 50 hours compared to the initial precipitates while any microstructual change in zone B was not observed by in-situ heating at $500^{\circ}C$ up to 50 hours. Only the precipitates in zone A of Al-4Fe-0.5Mo-1.5Si alloy ribbon satisfied $r^3{\propto}t$ relationship of coarsening mechanism.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2009년도 임시총회 및 하계학술연구발표회
• /
• pp.121-122
• /
• 2009

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2009년도 정기총회 및 동계학술연구발표회
• /
• pp.168-169
• /
• 2009

• 한국전기전자재료학회논문지
• /
• 제17권8호
• /
• pp.888-892
• /
• 2004

It is necessary to develop soft magnetic layer with high saturation magnetization 4 $\pi{M}_s$ and in-plane magnetic anisotropy field Hk for soft magnetic underlayer of perpendicular magnetic recording media with high signal to noise ratio. Fe-Co-B layer with high 4 $\pi$Ms of about 23 kG deposited on Ni-Fe and Ni-Fe/Si seedlayer exhibited very high in-plane magnetic anisotropy filed Hk of about 280 and 380 Oe, respectively, In-plane XRD studies clarified that the lattice spacing of planes along the easy axis direction was longer than that along the hard axis direction in the Fe-Co-B layers with high Hk. These results indicate that high Hk of Fe-Co-B/Ni-Fe and Fe-Co-B/［Ni-Fe/si］ layers were resulted from magnetoelastic anisotropy owing to a residual stress. Moreover, the high Hk in the Fe-Co-B/Ni-Fe layer was maintained until 30$0^{\circ}C$ annealing temperature.

• Journal of Magnetics
• /
• 제16권3호
• /
• pp.318-321
• /
• 2011

A new Fe-based amorphous compound powder was prepared from Fe-Si-B amorphous powder by crushing amorphous ribbons as the first magnetic component and Fe-Cr-Mo metallic glassy powder by water atomization as the second magnetic component. Subsequently by adding organic and inorganic binders to the compound powder and cold pressing, the new Fe-based amorphous compound powder cores were fabricated. This new Fe-based amorphous compound powder cores combine the superior DC-Bias properties and the excellent core loss. The core loss of 500 kW/$m^3$ at $B_m$ = 0.1T and f = 100 kHz was obtained When the mass ratio of FeSiB/FeCrMo equals 3:2, and meanwhile the DC-bias properties of the new Fe-based amorphous compound powder cores just decreased by 10% compared with that of the FeSiB powder cores. In addition, with the increasing of the content of the FeCrMo metallic glassy powder, the core loss tends to decrease.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.49-51
• /
• 1989

The effect of Mo elenent and annealing condition on the magnetic properties were investigated in Fe$_{80}$B$_{12}$Si$_{8}$ amorphous alloy. With increasing Mo contents, soft magnetic properties were improved by decreasing coercive force and increasing maximum permeability. These improvements were attributed to the decreasing of magnetostriction by Mo addition. The annealing treatment also improved the soft magnetic properties of (Fe$_{1-x}$ Mo$_{x}$)$_{80}$ B$_{12}$ Si$_{8}$ amorphous alloys. It could be thought that these improvements were ascribed to the relaxation of internal stress.nal stress.ess.

• 한국전기전자재료학회논문지
• /
• 제16권12S호
• /
• pp.1305-1309
• /
• 2003

To utilize FeCoSiB amorphous films for magnetoelastic sensors, the temperature dependency of magnetization (M-T curve) and the magnetization properties of the amorphous films were investigated in this study. As the amount of cobalt In the films increased, the Curie temperature decreased but the crystallization temperature increased. In addition to this, the crystallization temperature was lower than the Curie temperature in the film containing 20 at% cobalt. The optimized annealing condition was set up by analyzing the H-T curve. And then, the amorphous film that has excellent magnetic properties and uni-axal anisotropy could be prepared for construction of the magnetoelastic sensor devices. The coercive force of the film was below 0.5 Oe and the anisotripic field was about 5 Oe.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.59-72
• /
• 1999

In this thesis, we measured the Barkhausen effect of CoFeSiB amorphous ribbon and then investigated its possibility to be used as a sensor material. We used a sample of composition $($Fe_{0.06}$$Co_{0.94}$)_${0.79}$$Si_{2.1}$$B_{18.9}$ with a thickness 12[pm1, width 2.5[rnml and length 5[cm], which was fabricated by a single roll method. In order to improve magnetic characteristics of the sample, we had carried on annealing in the magnetic field and in none magnetic field. And, experimented results to the magnetic characteristics show that the ribbon has large Barkhausen jump even in weak magnetic field below 0.5[0el. From the results, we confirmed that the sample can be used as an magnetic sensor material.

• 한국자기학회지
• /
• 제20권1호
• /
• pp.13-17
• /
• 2010

연자기 특성이 우수한 것으로 잘 알려진 Fe-6.5 % Si 합금을 분말로 제작하여 성형한 Fe-6.5 % Si 압분코어에서도 좋은 특성을 얻을 수 있는 지를 확인하기 위해 Fe-3, 4.2 그리고 6.8 % Si 압분코어를 각각 제작하여 교류와 직류 자기특성, 미소경도 등을 분석하였다. 실리콘 함량이 증가할수록 와전류손실은 감소하나 이력손실은 증가하여 Fe-6.8 % Si에서 최소손실을 얻을 수 없었다. 또한 실리콘함량이 증가할수록 코어의 전기비저항과 분말입자의 미소경도는 지속적으로 증가하였으며 이 때문에 충진율은 감소하였다. B2와 $DO_3$상이 Fe-6.8 % Si 분말에서만 생성된 것을 확인할 수 있었으며, 6.8 % Si보다 낮은 실리콘 함량에서 코어손실이 더 낮은 것을 절연체와 분말입자의 비저항 비율, 미소경도변화에 따른 충진율 저하와 반자장 효과 등으로 설명할 수 있었다.

• 한국자기학회지
• /
• 제19권2호
• /
• pp.62-66
• /
• 2009

연자성 금속재료인 $Fe_{94}Si_5Cr_1$을 30시간 볼밀 한 후 주사전자현미경을 사용하여 관찰한 결과 볼밀 가공한 FeSiCr의 입자들이 구형에서 편상으로 변함을 확인하였다. FeSiCr을 실리콘 고무와 혼합하여 핸드폰용 전파흡수체를 제조하고 network analyzer을 이용하여 두께에 따른 FeSiCr-고무 전파흡수체의 전파흡수특성 및 재료정수를 측정하였으며, 그들의 상관관계를 비교 조사하였다. 그 결과 sheet형 전파흡수체 두께에 따라서 정합주파수가 낮은 주파수 대역으로 shift 됨을 알 수 있고, 1.3 mm의 두께로 제조한 전파흡수체에서는 이동통신주파수 대역인 1.86 GHz에서 -8.3 dB의 반사손실을 보여주었다.