• 제목/요약/키워드: FeMn/NiFe

검색결과 762건 처리시간 0.029초

NiFeCo/Cu/NiFeCo/FeMn 스핀밸브 구조의 자기저항 거동 해석 (Analysis of Giant Magnetoresistance Behavior of NiFeCo/Cu/NiFeCo/FeMn Valves)

  • 배성태;김진영;민경익;신경호
    • 한국자기학회지
    • /
    • 제6권2호
    • /
    • pp.112-116
    • /
    • 1996
  • 스퍼터링법으로 제조한 NiFeCo/Cu/NiFeCo/FeMn 스핀밸브 자성 다층막의 자기적 성질과 자기저항에 대해 연구하였다. Cu 사잇층 두께가 15 .angs. 인 경우 약 6%의 자기저항을 얻을 수 있었다. NiFeCo/FeMn에서 교환이방성 자계는 약 20 Oe 정도였는데, 이는 NiFe/FeMn 계 스핀밸브 구조에서 보고된 값(100 Oe 이상) 보다 현저히 작은 것이다. 3 mTorr에서 제조한 NiFeCo 박막은 약 10 Oe 정도의 큰 보자력을 보임으로써 비슷한 조건에서 제조한 NiFe 박막의 경우(약 2 Oe)보다 상당히 큰 값을 갖는 것으로 관찰되었다. 작은 교환이방성 자계와 큰 보자력으로 인해 음 .rarw. 양 방향과 양 .rarw. 음 방향의 자화거동에 있어서 비대칭적인 자기저항 이력곡선 거동을 보이는 것으로 나타났다.

  • PDF

Exchange bias in NiFe/FeMn/NiFe multilayers

  • Sankaranarayanan, V.K.;Lee, Y.W.;Shalyguina, E.E.;Kim, C.G.;kim, C.O.
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 춘계학술대회 논문집 초전도 자성체 연구회
    • /
    • pp.55-58
    • /
    • 2003
  • FeMn based spin valves often consist of a NiFe/FeMn/NiFe trilayer structure. We have investigated the evolution of exchange bias at the bottom and top interfaces in the NiFe(5nm)/FeMn(x)/NiFe(5nm) trilayer structure as a function of FeMn thickness in the range 3 nm to 30 nm. The XRD results indicate (111) textured growth for NiFe and FeMn layers. The magnetization studies using VSM show two hysteresis loops corresponding to the bottom NiFe seed layer and top NiFe layers with greater bias for the bottom NiFe layer, for FeMn thickness equal to and above 5 nm. The larger exchange bias for the bottom seed layer is confirmed by the surface sensitive MOKE hysteresis loop measurements which show gradual weakening of the MOKE hysteresis loop for the bottom NiFe layer with increasing FeMn thickness. The observed large exchange bias in a spin valve structure is usually attributed to the pinning NiFe layer on top of the FeMn layer, even when a NiFe seed layer of a few nm thickness is present, whereas, in reality it may be arising from the bottom seed layer, as shown by the present study.

  • PDF

Mn-Ir/Ni-Fe 다층막의 하지층과 적층구조에 따른 교환이방성과 미세구조 연구 (The Exchange Anisotropy and Microstructure of Mn-Ir/Ni-Fe Multilayers with Various Buffer Layer Materials and Stacking Structures)

  • 노재철;윤성용;이경섭;김용성;서수성
    • 한국자기학회지
    • /
    • 제9권4호
    • /
    • pp.196-202
    • /
    • 1999
  • 본 연구에서는 마그네트론 스퍼터링 법으로 제작한 Mn-Ir/Ni-Fe/Buffer/Si 다층막에서 다양한 하지층과 적층구조에 따른 교환이방성과 미세구조에 대하여 고찰하였다. Ni-Fe 위에 Mn-Ir을 증착한 Top 구조의 경우에서는 (111) 우선방위에 상관없이 165 Oe 이상의 높은 Hex 값을 얻을수 있었다. 또한 Mn-Ir/Ni-Fe 계면에서 grain-to-grain epitaxy가 발생함을 알 수 있었다. 따라서 Mn-Ir/Ni-Fe 다층박막의 Hex는 Mn-Ir/Ni-Fe 계면에서의 Mn-Ir의 결정립 크기와 grain-to-grain epitaxy에 의존하며 Hc는 Mn-Ir/Ni-Fe의 계면거칠기에 의존한다는 것을 알 수 있었다.

  • PDF

Mn-Ir/Ni-Fe/buffer/Si 다층박막에서 하지층에 따른 교환이방성 및 거대자기저항에 대한 연구 (A Study on the exchange anisotropy and the giant magnetoresistance of Mn-Ir/Ni-Fe/buffer/Si with various buffer layers)

  • 윤성용;노재철;전동민;박준혁;서수정;이확주
    • 한국결정성장학회지
    • /
    • 제9권5호
    • /
    • pp.486-492
    • /
    • 1999
  • 본 실험에서는 D.C magnetron sputtering을 사용하여 Mn-Ir/Ni-Fe/buffer/Si 다층박막의 교환결합 자계와 보자력에 영향을 주는 인자를 미세구조의 관점에서 분석하였다. (111) 우선방위에 상관없이 모든 시편에서 155 Oe 이상의 교환결합 자계가 발생하였다. Mn-Ir/Ni-Fe 의 계면에서 Mn-Ir의 결정립 크기와 게면 거칠기가 Mn-Ir/Ni-Fe 다층박막의 교환결합 자계와 보자력에 가장 많은 영향을 주는 것을 알 수 있었다. Mn-Ir/Ni-Fe/Cu/Ni-Fe/buffer/Si spin-valve 다층박막에서 각 층의 두께와 하지층에 따른 자기저항비와 coulping field을 분석하였다. Mn-Ir(10 nm)/Ni-Fe(7.5 nm)/Cu(2 nm)Ni-Fe(6 nm)/Ta (5 nm)/Si에서 최대 자기저항비가 발생하였다. 강자성체의 결정립 크기가 거대자기저항비에 영향을 주는 것을 알 수 있었다. 그리고 계면 거칠기와 강자성체의 결정립 크기가 coulping field 에 많은 영향을 주는 것을 알 수 있었다.

  • PDF

MAGNETORESISTANCE OF NiFeCo/Cu/NiFeCo/FeMn MULTILAYERED THIN FILMS WITH LOW SATURATION FIELD

  • Bae, S.T.;Min, K.I.;Shin, K.H.;Kim, J.Y.
    • 한국자기학회지
    • /
    • 제5권5호
    • /
    • pp.570-574
    • /
    • 1995
  • Magnetoresistance of NiFeCo/Cu/NiFeCo/FeMn uncoupled exchange biased sandwiches has been studied. The magnetoresistance change ratio, ${\Delta}R/R_{s}$ showed 4.1 % at a saturation field as low as 11 Oe in $Si/Ti(50\;{\AA})/NiFeCo(70\;{\AA})/Cu(23\;{\AA})/NiFeCo(70\;{\AA})/FeMn(150\;{\AA})/Cu(50\;{\AA})$ spin valve structure. In this system, the magnetoresistance was affected by interlayer material and thickness. When Ti and Cu were used as the interlayer material in this structure, maximum magnetoresistance change ratio were 0.32 % and 4.1 %, respectively. 6.1 % MR ratio was obtained in $Si/Ti(50\;{\AA})/NiFeCo(70\;{\AA})/Cu(15\;{\AA})/NiFeCo(70\;{\AA})/FeMn(150\;{\AA})/Cu(50\;{\AA})$ spin valve structure. The magnetoresistance change ratio decreased monotonically as the interlayer thickness increased. It was found that the exchange bias field exerted by FeMn layer to the adjacent NiFeCo layer was ~25 Oe, far smaller than that reported in NiFe/Cu/NiFe/FeMn spin valve structure(Dieny et. al., ~400 Oe). The relationship between the film texture and exchange anisotropy ha been examined for spin valve structures with Ti, Cu, or non-buffer layer.

  • PDF

MAGNETIC PROPERTIES OF THERMALLY ANNEALED $(Ni_{80}Fe_{20})_{1-x}Mn_x$ THIN FILMS

  • Kim, K. K.;Kim, C. K.;C. S. Yoon;Kim, S. J.
    • 한국자기학회:학술대회 개요집
    • /
    • 한국자기학회 2002년도 동계연구발표회 논문개요집
    • /
    • pp.190-191
    • /
    • 2002
  • Granular feromagnets는 non-magnetic maxtrix 안에 nanometer-sized의 ferromagnetic grain들 구성된다. Co-Cu,Co-Ag, Fe-Ag, NiFe-Ag $^1$을 포함하는 이미 알려진 다른 Granular 금속 합금들의 giant magnetoresistance 에 관계하여 Granular feromagnets 에 대해 조사하였다. Bulk상태의 NiFe와 Mn 혼화되기 쉽다.$^2$ 그리고 Mn은 열처리된 다층박막의 NiFe의 lattice에 쉽게 수용되어진다.$^3$ 이번 실험에서는 metastable한 fcc solid solution NiFe-Mn 박막이 열처리 하에서 NiFe과 Mn으로 분리되었다. (중략)

  • PDF

Mn-Ir/Ni-Fe 교환결합형 다층박막의 미세구조 및 열적특성 (Microstructure and Thermal Properties of Mn-Ir/Ni-Ee Exchange Biased Multilayers)

  • 윤성용;전동민;김장현;서수정;노재철;이확주
    • 한국자기학회지
    • /
    • 제10권6호
    • /
    • pp.274-279
    • /
    • 2000
  • 본 연구에서는 D.C 마그네트론 스퍼터링을 사용하여 Mn-Ir/Ni-Fe교환결합형 다층박막의 하지층 및 적층구조에 따른 자기적 특성 및 열적 특성을 미세구조의 관점에서 연구하였다. 교환결합자계( $H_{e{\chi}}$)와 Blocking Temperature( $T_{b}$)는 Mn-Ir/Ni-Fe 계면에서의 반강자성체의 결정립 크기에 의존하는 것을 알 수 있었다. 또한 Mn-Ir/Ni-Fe 교환결합형 다층박막에서 (111) 우선방위의 발생으로 인하여 $H_{e{\chi}}$가 증가됨을 알 수 있었다. $H_{e{\chi}}$가 발생하는 Mn-Ir/Ni-Fe 다층박막은 Mn-Ir 층에 전위가 생성되어 grain-to-grain epitaxy 관계가 이루어지는 것을 알 수 있었다.다.

  • PDF

Mn-Ir의 조성과 두께 및 초기진공도에 따른 Mn-Ir/Ni-Fe/Zr 다층막의 자기적특성과 미세구조 연구 (A Study on the Magnetic Properties and Microstructures of Mn-Ir/Ni-Fe/Zr Muti layers with Various Compositions, Thicknesses and Base Pressures)

  • 노재철;최영석;이경섭;김용성;서수정
    • 한국자기학회지
    • /
    • 제9권3호
    • /
    • pp.166-172
    • /
    • 1999
  • 본 연구에서는 마그네트론 스퍼터링 법으로 제작한 Mn-Ir/Ni-Fe/Zr/Si 다층막에서 Mn-Ir의 조성과 증착조건을 변화시키고 또한 Mn-Ir층의 두께를 조절한 후 자기적 특성과 미세구조에 대하여 고찰하였다. Mn-22at% Ir의 조성에서 219Oe의 가장 높은 Hex와 30Oe의 낮은 Hc를 얻을 수 있었다. 초기진공도가 3.0$\times$10-6Torr 이상 일때는 교환이방성이 사라지게 되었으며 이것은 Mn-Ir의 비정질화와 결정립미세화에 의한 것으로 판단된다.

  • PDF

Microstructural Evolution in CuCrFeNi, CuCrFeNiMn, and CuCrFeNiMnAl High Entropy Alloys

  • Hyun, Jae Ik;Kong, Kyeong Ho;Kim, Kang Cheol;Kim, Won Tae;Kim, Do Hyang
    • Applied Microscopy
    • /
    • 제45권1호
    • /
    • pp.9-15
    • /
    • 2015
  • In the present study, microstructural evolution in CuCrFeNi, CuCrFeNiMn, and CuCrFeNiMnAl alloys has been investigated. The as-cast CuCrFeNi alloy consists of a single fcc phase with the lattice parameter of 0.358 nm, while the as-cast CuCrFeNiMn alloy consists of (bcc+fcc1+fcc2) phases with lattice parameters of 0.287 nm, 0.366 nm, and 0.361 nm. The heat treatment of the cast CuCrFeNiMn alloy results in the different type of microstructure depending on the heat treatment temperature. At $900^{\circ}C$ a new thermodynamically stable phase appears instead of the bcc solid solution phase, while at $1,000^{\circ}C$, the heat treated microstructure is almost same as that in the as-cast state. The addition of Al in CuCrFeNiMn alloy changes the constituent phases from (fcc1+fcc2+bcc) to (bcc1+bcc2).