• Resources Recycling
• /
• v.26 no.2
• /
• pp.18-24
• /
• 2017

The $FeCl_3$ solution has been used as an etchant for etching of metal. It is necessary to reuse the etching solution because waste $FeCl_3$ etchant generated after use has provided environmental and economic problems. In this study, HCl was mixed with the $FeCl_2$ solution and then $H_2O_2$ was added into the mixed solution to oxidize the $Fe^{2+}$. During the oxidation process, oxidation-reduction potential (ORP) was measured and the relationship between ORP and oxidation ratio was investigated. As a result, this study found that the ORP was increased with increasing the concentration of HCl and $H_2O_2$, while the ORP is decreased with oxidation progress. Such a behavior was in good agreement with Nernst's equation. Also, the oxidation efficiency reached about 99% when a sufficient amount of HCl and $H_2O_2$ were added.

• Journal of the Korean Ceramic Society
• /
• v.13 no.2
• /
• pp.3-7
• /
• 1976

Influences of chlorides(CaCl2, MgCl2, NaCl) on the colouring effect of Fe component in white portland cement was investigated. Chlorides enhance the whiteness of the white portland cement owing to volatilization of Fe2O3 and translation of ferrite composition toward C2F. This translation is caused by consumption of alumina at the formation of C12A7, the formation of which is promoted in the presence of chloride. With decrease of p in ferrite composition C6F1-pAp, transfer of Fe3+ from 4 to 6 coordinated cite is occurred, and as a result, whiteness is raised. Hydration process of the cement containing a small amount of chloride differs little from the one without chloride.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.6
• /
• pp.413-421
• /
• 1986

Hydrocarbon solution of $Cp_2Zr(CH_3)Cl$ react rapidly with $Na_2Fe(CO)_4$ (1/2 equiv.) to yield $[Cp_2Zr(CH_3)]_2Fe(CO)_4$ and NaCl. The more soluble metal-metal bonded complex $[Cp_2ZrC_8H_{17}]_2Fe(CO)_2$ has also been prepared through the reaction of $Cp_2Zr(C_8H_{17})BF_4$ and $Na_2Fe(CO)_4 (1/2 equiv.). The complexes were characterized by IR, $^1H$ NMR, ^{13}C$ NMR, and elemental analysis. The infrared spectrum of $[Cp_2ZrR]_2Fe(CO)_4$ shows four bands, which is indicative of a cis-structure. The $^{13}C$ NMR spectrum provides evidence for the cis-structure.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.9
• /
• pp.923-928
• /
• 2000

[FeIII(BBA)DBC]ClO4 as a new functional model for catechol dioxygenases has been synthesized, where BBA is a bis(benzimidazolyl-2-methyl)amine and DBC is a 3,5-di-tert-butylcatecholate dianion.The BBA complex has a structuralfeature that iron cent er has a five-coordinate geometry similar to that of catechol dioxygenase-substrate complex.The BBA complex exhibits strong absorptionbands at 560 and 820 nm in CH3CN which are assigned to catecholate to Fe(III) charge transfer transitions. It also exhibits EPR signals at g = 9.3 and 4.3 which are typical values for the high-spin FeIII (S = 5/2) complex with rhombicsymmetry. Interestingly, the BBA complex reacts with O2 within an hour to afford intradiol cleavage (35%) and extradiol cleavage (60%) products. Surprisingly, a green color intermediate is observed during the oxygenation process of the BBA com-plex in CH3CN. This green intermediate shows a broad isotropic EPR signal at g = 2.0. Based on the variable temperature EPR study, this isotropic signalmight be originated from the [Fe(III)-peroxo-catecholate] species havinglow-spin FeIII center, not from the simple organic radical. Consequently,it allows O2 to bind to iron cen-ter forming the Fe(III)-superoxide species that converts to the Fe(III)-peroxide intermediate. These present data can lead us tosuggest that the oxygen activation mechanism take place for the oxidative cleavingcatechols of the five-coordinate model systems for catechol dioxygenases.

• Journal of Applied Biological Chemistry
• /
• v.59 no.4
• /
• pp.285-288
• /
• 2016

Proteolytic enzymes perform hydrolysis of the peptide bonds in the protein and most commonly use in the industry. Pseudoxanthomonas sp. WD12 and WD32 were previously isolated as protease producers from a rotten wood sample. Here, we report the secreted proteolytic enzymes. The optimum enzyme reaction temperature for the secreted crude enzyme from the strain WD12 and WD32 were $50^{\circ}C$ at pH 9.0 and $45^{\circ}C$ at pH 8.0, respectively. The enzyme activities of both strains were increased by addition of KCl, NaCl, $CaCl_2$ or $MnSO_4$, and decreased by addition of $AgNO_3$, $CuSO_4$, $FeCl_3$ or $AlCl_3$. Secreted enzymes of both strains were most strongly inhibited by addition of $FeCl_3$ or $CuSO_4$. Taken together these results, WD12 could be a candidate strain of industrial alkaline protease production.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.2
• /
• pp.134-139
• /
• 1990

The hydrogenation catalyst precursors $[(L-L)Rh(NBD)]ClO_4\;(L-L=Fe({\eta}^5-C_5H_4PBu^t\;_2)_2,\;Fe({\eta}^5-C_5H_4PPhBu^t)_2$; NBD = norbornadiene) react with $H_2(1\;atm,\;30^{\circ}C$, MeOH) to yield $[(L-L)HRh({\mu}-H)_3RhH(L-L)]ClO_4$. These hydrido species are fluxional, and variable temperature NMR studies show the existence of a number of equilibria involving both fluxional and non-fluxional species. The synthesis, solution structures, and fluxional behaviors of these hydrides are described.

• Particle and aerosol research
• /
• v.13 no.1
• /
• pp.33-40
• /
• 2017

Cobalt-iron oxides have emerged as alternative electrode materials for supercapacitors because they have advantages of low cost, natural abundance, and environmental friendliness. Graphene loaded with cobalt ferrite ($CoFe_2O_4$) nanoparticles can exhibit enhanced specific capacitance. In this study, we present three-dimensional (3D) crumpled graphene (CGR) decorated with $CoFe_2O_4$ nanoparticles. The $CoFe_2O_4$-graphene composites were synthesized from a colloidal mixture of GO, iron (III) chloride hexahydrate ($FeCl_3{\cdot}6H_2O$) and cobalt chloride hexahydrate ($CoCl_2{\cdot}6H_2O$) respectively, via one step aerosol spray pyrolysis. Size of $CoFe_2O_4$ nanoparticles was ranged from 5 nm to 10 nm when loaded onto 500 nm CGR. The electrochemical performance of the $CoFe_2O_4$-graphene composites was examined. The $CoFe_2O_4$-graphene composite electrode showed the specific capacitance of $253F\;g^{-1}$.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.482-486
• /
• 2004

울산지역 수질특성에 관하여 연구하기 위해 228개 지점에서 수질성분 25개 항목을 분석하였다. 그 성분중 지하수 음용수 9개 수질성분(pH, EC, TDS, Cl, Mn, NO$_3$, SO$_4$, F, Fe)에 관해 수질분포특성 및 오염도를 나타내기 위해 모수적 통계기법인 정규크리깅과 비모수적 통계기법인 지시크리깅 기법을 적용하였다. OK와 IK의 성분별 베리오그램 분석한 결과 OK의 경우 모든 수질성분은 구상형모델(Spherical model)로 선정되었으며, IK의 경우 pH, TDS, SO$_4$, Cl, Mn, F, Fe 성분은 구상형모델로, EC는 지수형모델로, NO$_3$는 선형모델로 선정되었다. 그 결과 정규크리깅의 경우 연구지역의 수질특성을 정량적 분포특성이 잘 나타났다. 특히 태화강, 인접한 남구일원과 중구일원, 북구의 북서 일원 그리고 동구의 방어동일원에서 수질성분 9개 성분들이 다소 높게 나타났다. 특히 EC, TDS 그리고 Cl$^{-}$ NO$_3$ 성분이 높게 나타났다. 그리고 지시크리깅의 경우 정규크리깅과 비교하여 이상치가 크게 영향을 미칠 수 있는 통계학적인 오류를 보완하여 분석한 결과 울산지역 9개 성분 오염도는 EC>TDS>NO$_3$>pH>Fe>Mn>Cl>SO$_4$>F 순으로 오염특성이 나타났다.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.3
• /
• pp.156-162
• /
• 1999

Various types of iron oxide based materials as a cathode of lithium secondary battery have been prepared and their electrochemical characteristics have been also observed. In order to understand the fundamental characteristics of iron oxide electrode, three kinds of iron oxides such as iron oxides formed by direct oxidation of iron plate or iron powders and FeOOH powders were tested with cyclic voltammetry. The oxidation and reduction peaks due to the reaction of intercalation and deintercalation were not observed for the iron oxide prepared with iron plate and FeOOH powders. In case of iron oxide prepared from iron powders, only one reduction peak was observed. A layered form of $LiFeO_2$ was synthesized directly from $FeCl_3\cdot6H_2O,\;NaOH\;and\;LiOH$ and LiOH by hydrothermal reaction. The effect of NaOH on the electrode performance was examined. When increasing NaOH, it provides the electrode with less discharge capacity and efficiency, however, decreasing rate of discharge capacity became smaller. $LiFeO_2$ synthesized with the molar ratio of $NaOH/FeCl_3/LiOH$, 2/1/7 showed the largest capacity, but the discharging efficiency was sharply decreased after 30 cycles.

• Journal of the Korean Ceramic Society
• /
• v.29 no.9
• /
• pp.711-718
• /
• 1992

Pb(Fe1/2Nb1/2)O3 was prepared by the molten salt synthesis method using an equimolar mixture of NaCl-KCl. Initial particle size could be controlled by varying the weight ratio of the NaCl-KCl to raw materials from 0.1 to 1.0, and the initial particle size effects on the sintering and dielectric properties of Pb(Fe1/2Nb1/2)O3 were investigated at the sintering temperature range from 90$0^{\circ}C$ to 105$0^{\circ}C$. As the weight ratio of salt increased, the average particle size decreased and the particle size distributions tended to narrow. As the initial particle size decreased, the linear shrinkage and density increased due to the promotion of densification. Dielectric constant increased with decreasing the initial particle size resulting from the increase of density and grain size.