• 한국세라믹학회지
• /
• 제47권5호
• /
• pp.433-438
• /
• 2010

Fe-carbon/$TiO_2$ composites were prepared by a sol-gel method using AC, ACF, CNT and $C_{60}$ as carbon precursors and were characterized by means of BET surface area, X-ray diffraction (XRD), scanning electron microscopy (SEM), Transmission Electron Microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX). The activity of the prepared photocatalysts was investigated by degradation reaction of methylene blue (MB) irradiated with UV lamp. Effects of different carbon sources and irradiation time on photocatalytic activity were also investigated. The results showed that the photocatalytic activity of the Fe-carbon/$TiO_2$ composites was much higher than that of pristine $TiO_2$ and Fe/$TiO_2$ composites. The prominent photocatalytic activity of Fecarbon/$TiO_2$ composites could be attributed to both the effects of photo-adsorption and electron transfer by carbon substrate. In addition, the higher photocatalytic activity of Fe-carbon/$TiO_2$ composites can be compared with that of carbon/$TiO_2$ and Fe /$TiO_2$ composites due to cooperative effects between Fe and carbon.

• Environmental Engineering Research
• /
• 제13권2호
• /
• pp.85-92
• /
• 2008

In this present study, we have synthesized Fe-containing AC(activated carbon)/$TiO_2$ composites with titanium (VI) n-butoxide (TNB) as a titanium source to Fe treated AC through an impregnation method. The result of the textural surface properties demonstrates that there is a slight decrease in the BET surface area of composite samples with an increase of the amount of Fe treated. The surface properties of scanning electron microscope (SEM) presented a characterization of a porous texture on the Fe-containing AC/$TiO_2$ composites and homogenous compositions for Fe and titanium dioxide distributed on the sample surfaces. Fe compound peaks and a titanium dioxide structure were observed in the X-ray diffraction patterns for the Fe-containing AC/$TiO_2$ composites. The results of chemical elemental composition for the Fe-containing AC/$TiO_2$ composites showed that most of the spectra for these samples gave stronger peaks for C, O, treated Fe components and Ti metal than that of any other elements. From the photo degradation results for the piggery waste, the Fe-containing AC/$TiO_2$ composites showed an excellent degradation activity for the chemical oxygen demand (COD) due to a photocatalysis of the supported $TiO_2$, radical reaction by Fe species and the adsorptivity and absorptivity of porous carbon.

• 한국세라믹학회지
• /
• 제45권11호
• /
• pp.667-674
• /
• 2008

In this study, we prepared Fe-activated carbon fiber(ACF)/$TiO_2$ composites with titanium (VI) n-butoxide (TNB) as the titanium source for ACF pre-treated with iron compounds through the impregnation method. In terms of textural surface properties, the composites demonstrate a slight decrease in the BET surface area of the samples and an increase in the amount of iron compounds treated. The surface morphology of the Fe-ACF/$TiO_2$ composites was characterized by means of SEM. The composites have a porous texture with homogenous compositions of Fe and titanium dioxide distributed on the sample surfaces. The phase formation and structural transition of the iron compounds and titanium dioxide were observed in X-ray diffraction patterns of the Fe-ACF/$TiO_2$ composites. The chemical composition of the Fe-ACF/$TiO_2$ composites, which was investigated with EDX shows strong peaks for the C, O, Fe and Ti elements. The photo degradation results confirm that the Fe-ACF/$TiO_2$ composites show excellent removal activity for the COD in piggery waste due to photocatalysis of the supported $TiO_2$, radical reaction by Fe species, and the adsorptivity and absorptivity of ACF.

• 한국결정성장학회지
• /
• 제19권5호
• /
• pp.268-276
• /
• 2009

In this study, activated carbon (AC) was treated with ferric ion by a sol-gel method. The compound (Fe-AC) was employed for the preparation of Fe-activated carbon/$TiO_2$, (Fe-AC/$TiO_2$) composites. The prepared Fe-AC/$TiO_2$ composites were characterized with surface properties, structural crystallinity, elemental identification and photocatalytic activity. The SEM results showed that ferric compounds and titanium dioxide were fixed onto the AC surfaces. The XRD results showed that Fe-AC/$TiO_2$ composites mostly contained anatase phase. EDX showed the presence of C, O, and Ti with Fe peaks in all samples. Its photocatalytic degradation effect was evaluated with the degradation behavior of the methylene blue (MB) solution. MB degradation could be attributed to the synergetic effects of adsorption, photo-degradation of $TiO_2$ and photo-Fenton of Fe component. The degradation rate for this photocatalysis was evaluated as a function of the concentration of the dye, the amount of $TiO_2$ and the pH. Photocataytic activity is good at activity pH.

• 한국재료학회지
• /
• 제20권3호
• /
• pp.117-124
• /
• 2010

Titanium dioxide ($TiO_2$) particles deposited on different quantitative Fe-treated carbon nanotube (CNT) composites with high photocatalytic activity of visible light were prepared by a modified sol-gel method using TNB as a titanium source. The composites were characterized by BET, XRD, SEM, TEM and EDX, which showed that the BET surface area was related to the adsorption capacity for each composite. From TEM images, surface and structural characterization of for the CNT surface had been carried out. The XRD results showed that the Fe-ACF/$TiO_2$ composite mostly contained an anatase structure with a Fe-mediated compound. EDX results showed the presence of C, O, and Ti with Fe peaks in the Fe-CNT/$TiO_2$ composites. The photocatalytic activity of the composites was examined by degradation of methylene blue (MB) in aqueous solution under visible light, which was found to depend on the amount of CNT. The highest photocatalytic activity among the different composites was related to the optimal content of CNT in the Fe-CNT/$TiO_2$ composites. In particular, the photocatalytic activity of the Fe-CNT/$TiO_2$ composites under visible light was better than that of the CNT/$TiO_2$ composites due to the introduction of Fe particles.

• 한국세라믹학회지
• /
• 제45권6호
• /
• pp.324-330
• /
• 2008

Activated carbon/$TiO_2$ (AC/$TiO_2$) composites modified with different concentrations of Fe were prepared. The $N_2$ adsorption data showed that the composites had decreased surface area compared with the pristine activated carbon. This indicated the blocking of the micropores on the surface of AC, which was further supported by observation via SEM. XRD results showed patterns for the composites and an anatase typed titanium dioxide structure with a small part of rutile in a higher Fe concentration (> 1.0 mol/L). EDX results showed the presence of C and, O, with Ti peaks on the composites of Fe-AC/$TiO_2$ with relatively lower Ti concentration, which may be due to the higher Fe concentration incorporated into the composites. Subsequently, the photocatalytic effects on methylene blue (MB) were investigated. The improved decomposition of MB showed the combined effects of adsorptions and photodegradation. Especially, the composites modified by Fe revealed enhanced photodegradation behaviors of MB.

• Elastomers and Composites
• /
• 제44권4호
• /
• pp.408-415
• /
• 2009

졸-겔 방법을 사용하여 Fe-ACF/$TiO_2$ 복합체 광촉매를 제조하였다. 여러 가지 철 전구체를 사용하여 세가지 Fe-ACF/$TiO_2$ 복합체를 제조하고 BET, SEM, XRD 및 EDX를 사용하여 특성화 하였다. UV 조사에서 Rh.B 용액의 분해에 의거하여 Fe-ACF/$TiO_2$ 복합체의 광촉매 특성을 파악 하였다. 실험 결과로부터, Fe-ACF/$TiO_2$ 복합체는 ACF/$TiO_2$ 복합체 보다 Rh.B의 제거 효과가 더 우수함을 나타내었다. 또한 여러 가지 Fe 전구체 사용으로 인한 Fe 원소의 포토-펜톤 효과는 다르게 나타났다. $FeCl_3$을 사용하여 제조된 Fe-ACF/$TiO_2$ 복합체는 가장 우수한 포토-펜톤 효과를 나타내었고, pH 변화에 의존하여 Rh.B 용액 분해에 대하여 영향을 주었다.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.621-626
• /
• 2009

Fe-AC/Ti$O_2$ photocatalysts were prepared by a sol-gel method. The photocatalytic properties of Fe-AC/Ti$O_2$ photocatalysts for the purification of water have been investigated. The samples were characterized by scanning electron microscopy (SEM), specific surface area (BET), X-ray diffraction analysis (XRD), and energy dispersive X-ray spectroscopy (EDX). The photocatalytic activities were evaluated by the photocatalytic oxidation of methylene blue (MB) solution. It was found that the prepared Fe-AC/Ti$O_2$ composites have an excellent photocatalytic under visible light irradiation. A small amount of Fe ions in the AC/Ti$O_2$ composites could obviously enhance their photocatalytic activity. The high activities of the Fe-AC/Ti$O_2$ composites could be attributed to the results of the synergetic effects of the enhancement of the Fe element, the photocatalytic activity of Ti$O_2$, and the adsorption of AC.

• 분석과학
• /
• 제22권3호
• /
• pp.254-262
• /
• 2009

철 화합물을 처리한 활성탄소섬유(Fe-ACF)를 사용하여 Fe-활성탄소섬유/$TiO_2$ (Fe-ACF/$TiO_2$) 복합체 촉매를 제조하였다. 또한, Fe-ACF/$TiO_2$ 복합체 촉매는 BET, SEM, XRD 와 EDX 기기를 사용하여 특성화하였다. BET 표면적은 각각의 복합체들에 대한 흡착 특성과 관계 있음을 나타내었다. SEM 결과는 ACF의 표면상에 Fe 화합물과 이산화 티탄이 분포해 있음을 나타내었다. XRD 결과는 Fe-ACF/$TiO_2$ 복합체가 철 중간체 화합물과 함께 아나타제 구조를 가지고 있음을 나타내었다. EDX 결과는 Fe-ACF/$TiO_2$ 복합체내에 C, O, Ti와 Fe 피크의 존재를 보였다. 광촉매 분해 효과로부터, 이들 복합체에 의한 유기염료의 분해를 관찰 하였다. 다른 분해 효과는 Fe의 포토-펜톤 반응의 탓으로 여겨진다. 즉 Fe-ACF/$TiO_2$의 복합적인 반응은 MB 분해에 대한 강력한 포토-펜톤 반응을 생성한 것으로 여겨진다.

• Elastomers and Composites
• /
• 제44권3호
• /
• pp.290-298
• /
• 2009

본 논문에서 Fe-활성탄소 섬유(ACF)/$TiO_2$ 복합체 광촉매를 졸-겔 방법에 의하여 제조하였다. 합성된 광촉매는 UV조사하에서 MB용액의 광분해에 사용되었다. BET 데이터는 Fe와 Ti의 여러 가지 농도를 가지고 처리된 ACF의 표면에서 흡착 특성을 보여준다. SEM 사진에서 보여지는 것처럼, 철 혼합물과 $TiO_2$는 ACF 표면에 활착되어 있음을 나타내었다. X선 분말 회절법으로부터 얻어진 결과는 복합체로부터 FeO+$TiO_2$, Anatase 및 Rutile 구조의 결정상을 나타내었다. 원소분석을 위한 EDX spectra는 Fe와 함께 C, O, Ti의 peak들이 존재함을 나타내었다. MB 분해에 대한 활성은 $TiO_2$의 광분해와 Fe의 photo-Fenton 효과로 인해 전자/hole쌍 반응으로부터 파생된 -OH 라디칼들에 의한 것으로 여겨진다.