• 제목/요약/키워드: Fe-Cr-Mo

검색결과 216건 처리시간 0.027초

진공사출금형용 STS316L 금속 다공체 제조 및 기계적 특성 (Fabrication and Mechanical Properties of STS316L Porous Metal for Vacuum Injection Mold)

  • 김세훈;김상민;노상호;김진평;신재혁;성시영;진광진;김태안
    • 한국분말재료학회지
    • /
    • 제22권3호
    • /
    • pp.197-202
    • /
    • 2015
  • In this study, porous stainless steel (STS316L) sintered body was fabricated by powder metallurgy method and its properties such as porosity, compressive yield strength, hardness, and permeability were evaluated. 67.5Fe-17Cr- 13Ni-2.5Mo (wt%) powder was produced by a water atomization. The atomized powder was classified into size with under $45{\mu}m$ and over $180{\mu}m$, and then they were compacted with various pressures and sintered at $1210^{\circ}C$ for 1 h in a vacuum atmosphere. The porosities of sintered bodies could be obtained in range of 20~53% by controlling the compaction pressure. Compressive yield strength and hardness were achieved up to 268 MPa and 94 Shore D, respectively. Air permeability was obtained up to $79l/min{\cdot}cm^2$. As a result, mechanical properties and air permeability of the optimized porous body having a porosity of 25~40% were very superior to that of Al alloy.

정밀주조 Hastelloy C-276 합금의 미세조직과 기계적 성질에 미치는 W 함량과 열처리의 영향 (Effect of Tungsten Contents and Heat Treatment on the Microstructures and Mechanical Properties of Hastelloy C-276 Alloy Investment Castings)

  • 유병기;박흥일;배차헌;김성규;정해용
    • 한국주조공학회지
    • /
    • 제37권1호
    • /
    • pp.21-29
    • /
    • 2017
  • The effects of W content and heat treatment on the microstructure and mechanical properties of Hastelloy C-276 alloy investment castings were discussed. As the W content was increased, dendritic microstructure was refined and network type precipitate formed during solidification was distributed on the dendritic grain boundaries. Cr, Fe and Mn were highly segregated in the Ni-based dendrite matrix, and Mo, W, C and Si were in the precipitates. Due to the heat treatment, fine granular and flake precipitates were newly formed in the matrix, and unresolved network type precipitates remained on the grain boundary. The network type precipitates and the granular and flake precipitates formed by heat treatment were confirmed to be ${\mu}$ phase intermetallic compounds with similar compositions. Due to the increase of the W content and the heat treatment, hardness and tensile strength were significantly increased. However, tensile strength after aging treatment was decreased with the W content. These results can be explained in that brittle fracturing by the unresolved network type precipitates dispersed in the grain boundary was predominant over ductile fracturing by the dimple ruptures originating from the fine granular precipitates in the matrix.

수소 플라즈마 에칭과 탄소 확산법에 의한 다이아몬드막 표면의 평탄화 (Planarization of the Diamond Film Surface by Using the Hydrogen Plasma Etching with Carbon Diffusion Process)

  • 김성훈
    • 대한화학회지
    • /
    • 제45권4호
    • /
    • pp.351-356
    • /
    • 2001
  • 철, 코발트, 니켈 합금을 이용한 탄소확산-수소플라즈마 에칭법으로 다이아몬드 자체막의 표면을 매우 평탄하게 할 수 있었다. 이 방법에서의 다이아몬드 자체막을 합금과 몰리브데늄 기판 사이에 위치시켜 금속-다이아몬드-몰리브데늄(MDM) 샌드위치 형태의 샘플 세 트를 이루게 하였다. 이 샘플세트를 마이크로 웨이브 플라즈마 장치에 장착하여 수소 플라즈마를 발생시켜서 기판온도가 섭씨 1,000 이상이 되도록 하였다. 이와 같은 과정들은 탄소확산-수소플라즈마 방법이라고 하였다. 다이아몬드 자체막 표면을 에칭한 후 표면 거칠기, 표면형상, 에칭한 다이아몬드 표면속의 불순물의 침투를 조사하였다. 결론적으로, 탄소 확산-수소 플라즈마 에칭법은 전자 디바이스에 응용할 수 있는 매우 평탄한 다이아몬드 표면을 형성시키는 방법임을 알 수 있다.

  • PDF

Evaluation of the health status of preschool children stratified based on the weight-length index (WLI)

  • Shin, Kyung-Ok;Chung, Keun-Hee;Park, Hyun-Suh
    • Nutrition Research and Practice
    • /
    • 제4권5호
    • /
    • pp.383-392
    • /
    • 2010
  • This study was conducted to prepare basic materials and offer advice regarding dietary habits to prevent and cure childhood obesity by comparing and analyzing dietary habit, nutritional status, blood factors, and mineral contents of hair. All subjects were stratified by their weight-length index (WLI). According to the standard WLI values, 64.9% of children were within the normal value, 13.5% of children were underweight, and 21.6% of children were overweight and obese (WLI ${\geq}$ 110%). Overall, the score assessed dietary habit for all children was $21.32{\pm}2.55$ point (921 subjects), with 5.1% of children having excellent dietary habits and 3.1% having poor dietary habits. Additionally, 37.9% of underweight children, 37.6% of normal weight children, and 43.2% of overweight and obese children consumed higher amounts of protein than underweight children did (meat, fish, eggs, and soy products) (P < 0.05). Overweight and obese children consumed more fried foods than underweight or normal weight children (P < 0.05). Moreover, 38.0% of the children had hemoglobin levels of 12 g/dl, while 7.6% were anemic (11.1 g/dl). When a hematocrit level of 33% was taken as the standard, 11.0% of children were anemic. The plasma transferrin content was $263.76{\pm}54.52$ mg/dl in overweight and obese children. The mean values of Fe, Cu, Ca, Cr, Mn, Se, Na, K, Li, V, Co, and Mo were within the reference values, but the Zn concentrations of underweight, normal weight, and overweight and obese children were $67.97{\pm}28.51$ ppm, $70.09{\pm}30.81$ ppm, and $73.99{\pm}30.36$ ppm, respectively. The Zn concentration of overweight and obese children ($73.99{\pm}30.36$ ppm) was lower than that of the standard value (180~220 ppm). Therefore, a nutritional education program and new guidance for dietary pattern should be developed to reduce the number of underweight and overweight and obese children.

한국산 灰重石鑛의 광물학적, 지화학적 연구 및 그의 探査에의 이용 (The Mineralogical and Geochemical Study on Korean Scheelites and its Application to the Ore Prospecting)

  • So, Chil-Sup;Park, Maeng-Eon
    • 자원환경지질
    • /
    • 제12권2호
    • /
    • pp.79-93
    • /
    • 1979
  • 한반도 내에 부존되고 있는 중적광상들은 세 주요한 Metallousenetic Epoch (Pre-Cambrian E., Jurassic-early Cretaceous E., 및 late Cretaceous-early Tertiary E.)에 생성되었고 성인으로 열수작용과 접촉교대작용에 기인된다고 보고되었다. 이중 12개 광상(달성, 산내, 일광, 상동, 대화, 월악, 복수, 옥방, 쌍전, 홍성, 삼봉, 청양)을 본 연구의 대상으로 택하고 각 지역에서 채취한 표품중 모두 25개 시료에 대하여 지화학적 실험을 수행하였다. 즉 각 분쇄된 시료 (-80+120mesh)는 super panner, 중액, isodynamic separator, UV lamp를 이용한 물리적인 처리과정을 거쳐 최종으로 입체현미경 하에서 단체분리된 후 Jarrell-Ash 1.5m Grating Spectrometer를 이용하여 본 연구대상 시료로 개발한 Spectrochemical method (Carrier: NaCl, Internal standard: $La_2O_3$)로 정량 분석되었다. 본 연구에서 밝혀낸 국내 회중석 광내에 함유되는 희유 윈소의 종류는 모두 Al, Bi, Fe, Si, Mn, Pb, Mg, Sn, Mo, Cu, Sr, Cr, Y, Ag, Ti, Ni, As, Yb의 18개 원소이며, 이들은 각각의 절대적 및 상대적인 함량과 각 광화작용의 시기, 광상의 성인, 모암, 각 원소의 mobility 그리고 회중석광의 형광색 및 육안색과 비교 검토되었다. 본 연구의 결과로 회중석광이 정출되는 과정에서 유사한 지질환경의 물리화학적인 여건이 이루어지면 그 내에 함유되는 몇 성분원소들의 화학적인 특성은 매우 유사성을 보여주는 typochemical habit를 가짐을 알 수 있었다. 본 연구에서 밝혀진 한국산 회중석 광내의 희유성분(稀有成分)으로서 Y, Mn, Sr 원소들의 Geochemical mobility의 특성(特性)은 앞으로 회중석광의 심도탐광을 위하여 고려되어야하고, 더욱 연구개발되어야 할 것이다. 또한 상기 회중석 광내의 물리적 및 화학적으로 결합되어 있는 불순물의 희유성분들은 선광 제련 파정에서 금속성분의 추출농집공정(工程)에 유용한 자료가 될 것이다.

  • PDF

Source Identification and Quantification of Coarse and Fine Particles by TTFA and PMF

  • Hwang, In-Jo;Bong, Choon-Keun;Lee, Tae-Jung;Kim, Dong-Sool
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제18권E4호
    • /
    • pp.203-213
    • /
    • 2002
  • Receptor modeling is one of statistical methods to achieve reasonable air pollution strategies. In order to maintain and manage ambient air quality, it is necessary to identify sources and to apportion its sources for ambient particulate matters. The main purpose of the study was to survey seasonal trends of inorganic elements in the coarse and fine particles. Second, this study has attempted emission sources qualitatively by a receptor method, the PMF mo-del. After that. both PMF (positive matrix factorization) model and TTFA (target transformation factor analysis) model were applied to compare and to estimate mass contribution of coarse and fine particle sources at the receptor. A total of 138 sets of samples was collected from 1989 to 1996 by a low volume cascade impactor with 9 size fraction stages at Kyung Hee University in Korea. Sixteen chemical species (Si, Ca, Fe, K, Pb, Na, Zn, Mg, Ba, Ni, V, Mn, Cr, Br, Cu. Co) were characterized by XRF. The study result showed that the weighted arithmetic mean of coarse and fine particles were 51.3 and 54.4 $\mu\textrm{g}$/㎥, respectively. Contribution of both particle fractions were esti-mated using TTFA and PMF models. The number of estimated sources was seven according to TTFA model and 8 according to PMF model. Comparison of TTFA and PMF revealed that both methodologies exhibited similar trends in their contribution pattern. However, large differences between contributions were observed in some sour-ces. The results of this study may help to suggest control strategies in local countries where known source profiles do not exist.

Diamond 박막의 밀찰력 향상에 대한 연구

  • 이건환;이철룡;권식철
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 1999년도 제17회 학술발표회 논문개요집
    • /
    • pp.139-139
    • /
    • 1999
  • 다이아몬드는 지구상에서 가장 단단한 물질로 잘 알려져 있을 뿐만 아니라 공업적 측면에서 볼 때, 여러 가지 특출한 성질들을 동시에 지니고 있다. 인장강도, 압축강도, 탄성계수 등 기계적 특성이 우수하고 넓은 광투과성과 내열, 내화학, 내방사성을 지니고 있으며, 열전도율이 높고 전기적으로 절연체이다. 또한 hole이동도가 높고 도핑에 의해서 반도체적 특성을 나타낸다. 이와 같이 매우 뛰어난 성질을 공업적으로 응용하기 위하여 이전부터 많은 연구가 행해져 왔으며, 1980년대에 들어와 박막이나 코팅 형태로의 합성이 가능한 기상합성법이 큰 발전을 보임으로써 다이아몬드의 우수한 특성을 여러 분야에서 폭넓게 응용할 수 있게 되었다. 특히 마찰 응용분야에 최적의 재료로 추천되고 있다. 지금도 Epitaxial 다이이몬드를 기지 위에 성장시키고 다결정질박막을 여러 가지 비다이아몬드(Si, W, Mo 등) 기지 위에 성장시키는 연구가 계속되고 있으며 공구강 위엥 경질코팅으로써 한층 개선된 다이아몬드박막 제조를 위한 수많은 연구노력들이 집중되고 있다. 그러나 일반탄소강에 다이아몬드박막을 성장시키기 위한 많은 노력들은 크게 바람직하지 않은 non-diamond carbon(black carbon or graphitic soot)의 형성 때문에 방해를 받고 있다. 계면에서 이들의 형성은 증착된 다이아몬드박막과 금속기지의 저조한 밀착력을 나타내게 된다. 이외 같이 다이아몬드박막의 응용을 위하여 다이아몬드피막에 요구되는 중요한 조건은 기지에 대해서 강한 밀착력을 나타내는 것이며, 동시에 상대물에 대하여 낮은 마찰계수를 가져야 한다. 그러나 다이아몬드와 금속기지는 서로 다른 열챙창계수(각각 0.87$\times$10-6K-1, 12$\times$10-6K-1)의 차이로 인하여 밀착력이 현저히 떨어진다는 단점으로 인해 산업화에 많은 제약을 받아왔다. 이러한 문제점을 해결하기 위하여 본 연구에서는 다이아몬드박막과 금속기지 사이에 중간층을 이용하는 방법을 제안하였다. 이러한 시도는 일반적으로 중간층 형성 금속인 Ti 또는 TiN 등이 적용되었으나 원하는 결과를 얻지 못하였다. 즉 carbon과 Fe의 상호확산, non-diamond carbon상의 형성 그리고 열잔류응력을 완화시키고 일반탄소강 위에 다이아몬드박막을 형성시켜 우수한 밀착력을 얻기 위한 목적에 미흡하였던 것이다. 이에 중간층으로 Cr 또는 Cr계 화합물 박막을 이용하였는 바, 이 중간층을 이용한 결과 우수한 밀착력을 나타내는 다이아몬드박막을 얻었으며 열적, 구조저으로 모재와 다이아몬드에 적합한 결과를 얻을 수 있었다. 본 연구에 의해 얻어진 결과들은 재료 가공을 위하여 높은 경도와 내마모성등이 요구되는 절삭공구나 금형의 수명 향항에 크게 기여할 것이며 산업적으로 큰 응용이 기대된다.

  • PDF

철계 비정질 분말을 활용한 초고속 용사 코팅층 개발 (Development of Amorphous Iron Based Coating Layer using High-velocity Oxygen Fuel (HVOF) Spraying)

  • 김정준;김송이;이종재;이석재;임현규;이민하;김휘준;최현주
    • 한국분말재료학회지
    • /
    • 제28권6호
    • /
    • pp.483-490
    • /
    • 2021
  • A new Fe-Cr-Mo-B-C amorphous alloy is designed, which offers high mechanical strength, corrosion resistance as well as high glass-forming ability and its gas-atomized amorphous powder is deposited on an ASTM A213-T91 steel substrate using the high-velocity oxygen fuel (HVOF) process. The hybrid coating layer, consisting of nanocrystalline and amorphous phases, exhibits strong bonding features with the substrate, without revealing significant pore formation. By the coating process, it is possible to obtain a dense structure in which pores are hardly observed not only inside the coating layer but also at the interface between the coating layer and the substrate. The coating layer exhibits good adhesive strength as well as good wear resistance, making it suitable for coating layers for biomass applications.

Inconel 718의 국부 부식 저항성에 미치는 용체화 열처리의 영향 (Effect of Solution Annealing Heat Treatment on the Localized Corrosion Resistance of Inconel 718)

  • 이윤화;이준섭;권순일;신정호;이재현
    • Corrosion Science and Technology
    • /
    • 제22권5호
    • /
    • pp.359-367
    • /
    • 2023
  • The localized corrosion resistance of the Ni-based Inconel 718 alloy after solution heat treatment was evaluated using electrochemical techniques in a solution of 25 wt% NaCl and 0.5 wt% acetic acid. Solution heat treatment at 1050 ℃ for 2.5 hours resulted in an increased average grain diameter. Both Ti carbides (10 ㎛ diameter) and Nb-Mo carbides (1 - 9 ㎛ diameter) were distributed throughout the material. Despite heat treatment, the shape and composition of these carbides remained consistent. An increase in solution temperature led to a decrease in pitting potential value. However, the pitting potential value of solution heat-treated Inconel 718 was consistently higher than that of as-received Inconel 718 at all tested temperatures. Localized corrosion initiation occurred at 0.4 VSSE in a temperature environment of 80 ℃ for both as-received and solution heat-treated Inconel 718 alloys. X-ray photoelectron spectroscopic analysis indicated that the composition of the passive film formed on specimen surfaces remained largely unchanged after solution heat treatment, with O1s, Cr2p3/2, Fe2p3/2, and Ni2p3/2 present. The difference in localized corrosion resistance between as-received and solution heat-treated Inconel 718 alloys was attributable to microstructural changes induced by the heat treatment process.

란탄 기반 페롭스카이트 촉매를 이용한 악취 유발 물질의 저온 산화 반응 (Low-temperature Oxidation of Odor Compounds over La-based Perovskite Catalyst)

  • 방용주;서정길;이기춘;박찬정;김형태;송인규
    • Korean Chemical Engineering Research
    • /
    • 제49권2호
    • /
    • pp.168-174
    • /
    • 2011
  • La을 기반으로 하는 다양한 페롭스카이트 촉매를 페치니(Pechini)법에 따라 제조하고, 이 촉매를 음식물 처리 과정에서 발생하는 악취 성분의 저온 산화 반응에 적용하여 효과적인 탈취가 이루어지도록 하였다. 배출 가스의 정량 및 정성 분석을 통하여 음식물 처리 시간에 따른 주요 악취 성분의 양을 조사하였다. 그리고 주요 악취 성분들로 구성된 표준 악취 시료는 산화 반응기의 반응물로 도입하였다. 먼저, 다양한 전이 금속 M이 치환된 La 기반 페롭스카이트 촉매($LaMO_{3}$: M=Cr, Mn, Fe, Co 및 Ni)를 제조하고 전이 금속 M의 영향을 알아보기 위해 악취 성분의 산화 반응에 적용한 결과, 테스트한 촉매 중에서 $LaNiO_3$ 촉매가 가장 우수한 촉매 활성을 보였다. 또한 촉매 활성을 증진시키기 위하여 Pt가 치환된 페롭스카이트 촉매($LaNi_{1-x}Pt_{x}O_{3}$: x=0, 0.03, 0.1 및 0.3)를 제조하였고, 이로부터 $LaNi_{0.9}Pt_{0.1}O_{3}$ 촉매가 가장 효율적인 촉매인 것을 알 수 있었다. 끝으로 저온 산화 반응에서의 페롭스카이트 촉매의 활성을 극대화하기 위하여 담지된 페롭스카이트 촉매($XLaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$: X=페롭스카이트 함량(wt%), 0, 10, 20, 30, 40, 50 및 100)를 적용하였다. $XLaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$ 촉매의 활성은 페롭스카이트 함량에 따라 화산형(Volcano-shaped) 곡선을 나타내었으며, 이 때 $20LaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$ 촉매가 $180^{\circ}C$의 반응 온도에서 88.7%의 가장 높은 전환율을 보였다.