• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.4
• /
• pp.195-200
• /
• 2013

Novel Sr-Y-Si-Oxynitride yellow phosphors were synthesized and the effect of calcination temperature, reduction temperature and $Eu^{2+}$ concentration on their luminescence properties were studied. Optimal temperature conditions were found to be $1400^{\circ}C$ and $1300^{\circ}C$ for solid-state reaction and reduction, respectively. The synthesized $Ba_9Y_{2+y}Si_6O_{24-3y}N_{3y}:Eu^{2+}$ phosphors showed a single intense broadband emission in the range of 571~587 nm for 450 nm excitation light source. The highest luminescence intensity was obtained with Eu concentration of 3 mol% and concentration quenching was observed beyond 5 mol%. FE-SEM and PSA showed that the synthesized phosphors consists of particles with an average size of ${\sim}8.2{\mu}m$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.2
• /
• pp.115-127
• /
• 1973

Leaf discoloration of IR667 lines (tropical) and leading locals (temperate) in fields was classified according to the probable causes and nutritional disorder due to soil reduction in 1972 was investigated. 1. The causes of leaf discoloration in IR667 were low air temperature, soil reduction, seed born, insect bite, nitrogen depression, overdose pesticide, strong wind, early senescence and unknown one. 2. Leaf discoloration due to soil reduction which has been called Sageumbyeong by famers, was caused by the heavy application of $Ca(OH)_2$, compost and poor drainage followed by Zn and K deficiency and Fe toxicity. 3. About 30 days after transplanting deficiency concentration of K and Zn in leaf blade appears to be less than 2.0% and 20ppm respectively, and greater than 200ppm, 500ppm, and 1.0% respectively for toxicity or excess of Fe, Mn and Ca. and in the shoot 2.4% for K, 30ppm for Zn and 800ppm for Fe. The value of K/Ca should be greaterthan 2.0 for health. 4. When plants were damaged by soil reduction the contents of N, P, Ca, Mg, Fe, Mn, Na in shoot were increased and those of K, Zn, Si were decreased. 5. IR667 lines show in shoot higher content of N, P, Ca, Mg, Si, Na, and lower content K, Zn, Fe, Mn and lower root activity than local leading varietles in either healthy or disieased case, indicating IR667 lines are likely more suseptible to soil reduction damage. 6. Normal soil was less than 6.5 of pH and greater than -50 mv of Eh, but pH of problem soil was ranged from 6.7 to 7.4 and Eh from -100 to -190. 7. The root activity (${\alpha}$-naphthylamine oxidation) decreased at early stage of soil redudtion damage, then increased with severity and at the end it decreased again, but IR667 lines showed always lower root activity than local ones.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.24-24
• /
• 2010

대형구조물의 구조안정성 진단, 로봇과 같은 지능기계의 제어, 환경오염을 감지하기 위한 센서의 중요성은 날로 증대되고 있다. 이러한 센서의 감도와 성능을 높이기 위해서 소형화, 다기능화, 집적화가 요구되고 있는데, 고성능 센서소자들의 집적화를 위해서 기존에 적용된 벌크형태의 재료들을 박막화하여 다층적층 및 소형화할 필요가 있다. 집적화 센서의 구현에 있어서 전극박막은 센서의 특성을 좌우하는 중요한 역할을 한다. 일반적으로 금속박막이 전극으로 사용되고 있으나 열적 불안정성 및 박리현상의 문제점을 지니고 있다. 따라서 이를 해결하기 위해 전도성산화막을 전극으로 적용하고자하는 연구가 요구되고 있다. 전도성산화막을 전극으로 적용하면 센서소자의 성능이 개선되는 경향이 있다. $Sr_2FeMoO_6$(SFMO) 산화물은 자기장을 인가했을 때 저항이 감소하는 CMR(colossal magnetoresistance) 물질이며 상온비저항이 낮은 것으로 알려져 있다. 이중 페롭스카이트 (double perovskite) 구조를 갖는 $Sr_2FeMoO_6$ 박막은 센서소자의 전극으로 적용 가능할 것으로 생각되어 박막을 제조하고자 하였으며 미세구조와 전기전도 특성을 조사하였다. 박막제조를 위해서는 RF 스퍼터법을 사용하였다. 스퍼터를 위한 타겟은 고상반응법으로 분말타겟을 제조하였다. Ar/$O_2$ 가스 유랑변화, 압력변화, 기판 온도변화가 박막의 상형성 등 박막특성에 미치는 영향을 조사하였다. 기판으로는 $SiO_2$(100nm)/Si 기판을 사용하였다. 증착직후에는 비정질막이 얻어졌으며 SFMO 상을 만들기 위해서는 후열처리가 필요하였는데, 환원성 가스 분위기 [$H_2$(5%)/Ar] 에서 열처리 조건을 최적화하여 이중 페롭스카이트 구조의 단일상 박막을 제조할 수 있었다. SFMO 단일상 박막은 증착시에나 후열처리 시 산소의 억제가 중요함을 알 수 있었다.

• Journal of the Korean Magnetics Society
• /
• v.5 no.1
• /
• pp.42-47
• /
• 1995

FeN thin films for inductive recording heads were sputter deposited using RF diode sputtering mehtod from a pure iron target onto 7059 glass substrates, and their magnetic properties were measured. The magnetic properties were greatly affected by film thickness, gas pressure, sputter power and flow ratio of $N_{2}$ to Ar. Single layer FeN films with their thickness varied from $1,000\;{\AA}$ to $6,000\;{\AA}$ were doposited. 800 W sputter power, 3 mT gas pressure, $N_{2}$ to Ar flow ratio of 6.6 : 100 were the sputtering conditions. Up to 7 layers of FeN films having total thickness of $6,000\;{\AA}$ were deposited using $SiO_{2}$ of $30\;{\AA}$ thickness as intermediate layers and their coercivity and saturation magnetization were measured. The sputtering conditions were the same as those in the single layer films. Easy axis coercivity of the single layer FeN films gradually decreased as their thickness was increased, but for the films with their thicknesses above $3,000\;{\AA}$, the coercivity changed very little. As the number of the FeN layers were increased, the coercivity decreased We estimated the grain size of FeN films from the FWHM (Full Width at Half Maximum) of X-ray diffraction peaks. The grain size steadily decreased from about $200\;{\AA}$ to $120\;{\AA}$ as the number of layers were increased. Minimum hard axis coercivity of 0.4 Oe was obtained when the number of layers was four. Maximum relative permeability was 2,900 when the number of layers was three. The cut off frequeocy of the multilayer films were above 100 MHz.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2015.05a
• /
• pp.105-105
• /
• 2015

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.73-74
• /
• 2006

Ferroelectric thin films have been widely investigated for future nonvolatile memory application. We fabricated the BLT ($(Bi,La)_4Ti_3O_{12}$) films on Si using a STA ($SrTa_2O_6$) buffer layer BLT and STA film were prepared by sol-gel method. Measurement data by XRD and AFM, showed that BLT film and STA films were well crystallized and a good surface morphology. From C-V measurement reward that the Au/BLT/STA/Si structure showed a clockwise hysteresis loop with a memory window of 1.5 V for the bias voltage sweep of ${\pm}5$ V. From results, the Au/BLT/STA/Si structure is useful for FeFETs.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.29-33
• /
• 2014

The electrochemical characteristics of Al-Si casting alloys (Al-10%Si, Al-9%Si, Al-7%Si) in 3.5% NaCl solution at room temperature was studied using potentiodynamic techniques. The electrochemical values of corrosion potential($E_c$), corrosion current density($I_c$) and corrosion rate(mpy) were examined. The Al-Si alloys had several compounds such as $Mg_2Si$, ${\pi}$-$Al_8Si_6Mg_2Fe$ and $Al_2CuMg$ which could affect corrosion resistance significantly. The potentiodynamic polarization curve exhibited typical active behavior in anodic polarization curve. The major corrosion mechansim for the Al-Si alloys were pitting and grain boundary corrosion. As increasing Si and Cu contents, their corrosion resistance was decreased.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.6
• /
• pp.913-922
• /
• 2019

Magnetic $Ni_{0.7}Co_{0.3}Fe_2O_4$ nanoparticles that were prepared via the rapid combustion process were functionalized and modified to obtain magnetic $Ni_{0.7}Co_{0.3}Fe_2O_4@SiO_2-CHO$ nanocomposites, on which penicillin G acylase (PGA) was covalently immobilized. Selections of immobilization concentration and time of fixation were explored. Catalytic performance of immobilized PGA was characterized. The free PGA had greatest activity at pH 8.0 and $45^{\circ}C$ while immobilized PGA's activities peaked at pH 7.5 and $45^{\circ}C$. Immobilized PGA had better thermal stability than free PGA at the range of $30-50^{\circ}C$ for different time intervals. The activity of free PGA would be 0 and that of immobilized PGA still retained some activities at $60^{\circ}C$ after 2 h. $V_{max}$ and $K_m$ of immobilized PGA were 1.55 mol/min and 0.15 mol/l, respectively. Free PGA's $V_{max}$ and $K_m$ separately were 0.74 mol/min and 0.028 mol/l. Immobilized PGA displayed more than 50% activity after 10 successive cycles. We concluded that immobilized PGA with magnetic $Ni_{0.7}Co_{0.3}Fe_2O_4@SiO_2-CHO$ nanocomposites could become a novel example for the immobilization of other amidohydrolases.

• Economic and Environmental Geology
• /
• v.29 no.4
• /
• pp.421-428
• /
• 1996

The occurrence, optical property, chemical composition, crystal structure and formation environments of the phillipsite within deep-sea manganese nodules were systematically investigated in this study. Phillipsite in manganese nodules occurs in nucleus of nodules along with consolidated bottom sediments, weathered volcanic debris, and interstitial grains in the each layer of manganese encrusts. Phillipsite is predominantly pseudomorphs of volcanic shards, and occurs as white to pale yellow in color lath-shaped and equant crystals. These show aggregations of prismatic, blocky, and bladed of 2 to $20{\mu}m$ long, and 2 to $5{\mu}m$ thick. The simplified average chemical formula of phillipsite is $({Ca_{0.1}Mg_{0.3}Na_{1.1}K_{1.5}})_3{(Fe_{0.3}Al_{4.2}Si_{11.8})O_{32}{\cdot}10H_2O}$ with a very siliceous and alkalic. The $Si/(Al+Fe^{+3})$ ratio is 2.37 to 2.78 and alkalis greatly exceed the divalent exchangeable cations, and Na/K ratio is 0.59 to 0.81. The phillipsite is monoclinic ($P2_l/m$) with the unit-cell parameters, $a=10.005{\AA}$, $b=14.129{\AA}$, $c=8.686{\AA}$, ${\beta}=124.35^{\circ}$, and $V=1013.6{\AA}^3$. Phillipsites in manganese nodules formed apparently authigenically at a temperature less than $10^{\circ}C$, and they crystallized at a pressure of less than 0.7 kb, and pH of about 8 in deep-sea environments.

• Journal of the Korean Magnetics Society
• /
• v.3 no.3
• /
• pp.190-195
• /
• 1993

새로운 Fe기 초미세 결정립합금의 제조 가능성 및 자기특성에 관하여 조사하였다. 고포화자화 (Fe.$_{85}$Co.$_{15}$ )$_{80}$B$_{20}$ 비정질합금에서 천이금속을 약 10 at.% Al으로 치환한 (Fe.$_{85}$ Co.$_{15}$ )$_{70}$B$_{20}$Al$_{10}$ 합금은 급속응고에 의하여 비정질 기지내에 직접 .alpha. -Fe(Co)의 석출이 가능하다. 또한 (Fe.$_{85}$Co.$_{15}$ )$_{70}$B$_{20}$Al$_{10}$합금에 2~6 at.% Nb의 첨가는 급속 응고시 결정립성장을 억제하고 포화자왜를 약 6ppm이하로 감소시켜 자기 특성을 개선시킨다. 열처리에 의한 자기 특성은 Nb의 치환량이 증가할 수록 감소한다. 400 .deg. C에서 1시간 열처리한 (Fe.$_{85}$Co.$_{15}$ )$_{70}$ B$_{18}$ Al$_{10}$Nb$_{2}$합금은 평균 약 8nm이하의 .alpha. -Fe(Co) 결정립으로 구성된 초미세 결정립합금 으로 제조가 가능하며, 포화자속밀도, 철손 및 투자율 (f=50 kHz, B$_{m}$ =0.2 T)이 각각 1.2 T, 12W/kg 및 2.5 *$10^{4}$으로 가장 우수하다. 이는 Fe-Si-B-Nb-Cu 초미세결정립합금 및 영자왜 Co기 비정질합금과 거의 같은 자기특성을 나타낸다.다..다.다..낸다.다..