• Journal of Environmental Science International
• /
• v.5 no.1
• /
• pp.51-59
• /
• 1996

The purpose of this study was to evaluate the partial oxidation of the biological treatment plant effluents using Fenton's reagent as a pretreatment step prior to a tertiary biological oxidation of these effluents. Fenton's reagent was evaluated as a pretreatment process for inhibitory or refractory organics. Based on the Fenton oxidation system, the petrochemical wastewater treatment plant effluent was shown to have significant improvement in toxicity after oxidation with hydrogen peroxide. For example, at ranee of 42 ∼ 184 mg/L COD of petrochemical plant effluents, the COD removal efficiencies were from 38.2% to 60.1% after reaction with hydrogen peroxide 200 mg/L and Fe2+ 100 mg/L and reaction time was 30 minutes. The total TOC reduction were about 15.8∼22.4% with same test condition and difference between the overall removal rate and BOD/COD ratio after Fenton's oxidation estabilished in the biodegradation and otherwise meets the discharge standard or reuse for cooling tower make-up water.

• Journal of Environmental Health Sciences
• /
• v.19 no.4
• /
• pp.59-66
• /
• 1993

The cellular toxicity and antitumor effects of bleomycin are thought to be occurred by formation of O$_2$-Fe$^{2+}$-bleomycin complexes that degrade DNA and release O$_2^-$ and $^{\cdot}$OH radicals. Hydroxyl radicals derived from hydrogen peroxide seem most likely to be involved in the various stages of carcinogenesis, and transition metals such as iron play a central role in activation of bleomycin and in formation of hydroxyl radicals. This study was performed to investigate whether treatment with ferrous sulfate increase chromosome aberration induced by bleomycin and hydrogen peroxide, and whether there is different repair mechanism for DNA damage induced by those chemicals. Treatment with 3AB, Ara C, during G$_1$ and post-treatment with caffeine, and Hu during G$_2$ increased the frequency of chromosome aberration induced by bleomycin but post-treatment with caffeine only did function that way when hydrogen peroxide was treated. When 6.6X 10$^{-7}$ M of bleomycin or 5.0X10$^{-5}$M of hydrogen peroxide were treated simultaneously with iron, the frequency of chromosome aberration was reduced, if compared with the results by bleomycin or hydrogen per oxide alone.

• Nuclear Engineering and Technology
• /
• v.42 no.1
• /
• pp.89-96
• /
• 2010

This paper describes the methodology of calculating the internal dose conversion coefficient in order to assess the radiological impact on non-human species. This paper also presents the internal dose conversion coefficients of 25 radionuclides ($^3H,\;^7Be,\;^{14}C,\;^{40}K,\;^{51}Cr,\;^{54}Mn,\;^{59}Fe,\;^{58}Co,\;^{60}Co,\;^{65}Zn,\;^{90}Sr,\;^{95}Nb,\;^{99}Tc,\;^{106}Ru,\;^{129}I,\;^{131}I,\;^{136}Cs,\;^{137}Cs,\;^{140}Ba,\;^{140}La,\;^{144}Ce,\;^{238}U,\;^{239}Pu,\;^{240}Pu$) for domestic seven reference animals (roe deer, rat, frog, snake, Chinese minnow, bee, and earthworm) and one reference plant (pine tree). The uniform isotropic model was applied in order to calculate the internal dose conversion coefficients. The calculated internal dose conversion coefficient (${\mu}Gyd^{-1}$ per $Bqkg^{-1}$) ranged from $10^{-6}$ to $10^{-2}$ according to the type of radionuclides and organisms studied. It turns out that the internal does conversion coefficient was higher for alpha radionuclides, such as $^{238}U,\;^{239}Pu$, and $^{240}Pu$, and for large organisms, such as roe deer and pine tree. The internal dose conversion coefficients of $^{239}U,\;^{240}Pu,\;^{238}U,\;^{14}C,\;^3H$, and $^{99}Tc$ were independent of the organism.

• Journal of Surface Science and Engineering
• /
• v.20 no.2
• /
• pp.49-59
• /
• 1987

The properties of $Cr_2O_3-Al_2O_3-SiO_2$ composite oxide coatings on steel surface were investigated. The results obtained were as follows: The microhardness of oxide coating layer increased with increasing heat-treatment temperature and $Cr_2O_3$ content in coating layer. The hardness showed the highest value (850Hv) treated at 700$^{\circ}C$ for $SiO_2:Al_2O_3:Cr_2O_3$=1:1:4. Increasing heat-treatment temperature, corrosion current density became lower and coating layer became denser. The corrosion current density showed the lowest value $(6.5{\times}10^{-5}\;Acm^2)$ treated at 750$^{\circ}C\;for\;SiO_2:Al_2O_3:Cr_2O_3$=1:1:3. These results were explained by protective layer which was formed during heat-treatment. The bonding between matrix and coating layer is expected to be made mechanically and chemically by the inter diffusion of Ni and Fe. The composite oxide coating was formed by softening of the binder with increasing heat-treatment temperature. The strengthening of coating layer is to be resulted from the dispersion of major oxide particles.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.14 no.2
• /
• pp.59-68
• /
• 2018

This study compares true stress-true strain curves obtained by tensile tests of various piping materials with bi-linear stress-strain approximation suggested in the JSME Code Case(CC) Draft, a guideline for piping seismic inelastic response analysis. Based on the comparisons, the reliability of the bi-linear approximation is evaluated. It is found that bi-linear stress-strain curve of TP316 stainless steel is in good agreement with its true stress-true strain curve. However, Bi-linear stress-strain curves of TP304 stainless steel and carbon steels determined by the approximation cannot appropriately estimate their stress-strain behavior. Accordingly new bi-linear approximations for carbon steels and low-alloy steels are proposed. The proposed bi-linear approximations for carbon and low-alloy steels, which include the temperature effect on strength and hardening of material, estimate their stress-strain behavior reasonably well.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.3
• /
• pp.372-382
• /
• 1996

In order to elucidate the relationship between the mobility of heavy metals in soil and their uptake by plants, the soil samples collected from the Mangyeong River area were analyzed for the contents and existing forms of the heavy metals and the correlation between the contents of heavy metals in the soil and those in various parts of rice plants therefrom. The soil samples were collectes from ten sites in the paddy fields in 1982 and 1990, respectively, and the analysis on heavy metals including Cd, Zn, Cu and Pb was performed. The results are as follows: Total contents of heavy metals in the samples of 1990 were higher than those of 1982. The extent of increase was that Cd, Zn, Cu and Pb were 3, 29, 59 and 8% in top soil and 8, 50, 91 and 8% in sub-soil, respectively. The order of increasing ratio was Cu > Zn > Pb > Cd and the variation of Cd content by sequentially different extraction was organically bound > dilute acid-extractable=Fe-Mn oxide bound > exchangeable > residual fractions and the content of Cd with organically bound was $46.62{\sim}48.08$ and $41.18{\sim}50.18%$ of total Cd in top and sub-soil, respectively. The ratios of immobile heavy metals, Cd, Pb, Cu and Zn, bound within an oxide or silicate matrix of Fe-Mn oxide in top-soil were 21.25, 35.98, 74.18 and 82.12%, respectively, and consequently their mobile ratios of exchangeable, dilute acid-extractable and organically bound were more than 17.88%. Those of mobile Cd, Pb, Cu and Zn were 78.25, 64.02, 25.82 and 17.88%, respectively. Except for Pb a correlation between the contents of Cd, Zn, and Cu of exchangeable and dilute acid-extractable in top-soil and those in leaf blade, stem and panicle axis was significant, but was not significant in sub-soil.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.428-436
• /
• 2015

Five extraction conditions (AE, autoclave extraction; OE, oven extraction; HWSE, hot water and sonication extraction; HWASE, hot water acidified with 0.5% (v/v) acetic acid and sonication extraction; and BE, boiling extraction) were examined to compare the effects of different hot water extraction methods on the antioxidant properties of blueberries. The extraction yields of the AE, OE, HWSE, HWASE, and BE were 7.94%, 8.35%, 8.55% 9.15%, and 8.50%, respectively. The polyphenol and flavonoid contents of AE were 3.47 mg GAE/g and 1.59 mg RE/g, respectively, which were highest centents among others. Those of OE were ranked second to the highest. The total anthocyanin content of HWSE (5.29 mg/g) was significantly higher than that of others whereas that of AE showed the lowest content (0.96 mg/g). The order of ABTS radical and alkyl radical scavenging activities was as follows: AE > BE > OE > HWSE > HWASE. The antioxidant properties were considerably correspondent with the total polyphenol and flavonoid content. DPPH radical scavenging activity was quite high in HWSE, AE, and BE extraction, however, there were no significant differences among the five extraction methods in the aspect of $Fe^{2+}$ ion chelating activities. Moreover, AE showed the highest SOD activity, and protected the dermal fibroblast the best against $H_2O_2$-induced cytotoxicity. In conclusion, it was suggested that the autoclave extraction (AE) would be the most effective method for preparing blueberry hot water extracts with relatively high antioxidant activities.

• Journal of Sericultural and Entomological Science
• /
• v.13 no.1
• /
• pp.49-59
• /
• 1971

This experiment was conducted, how making use of "Seracol 100", a kind of nonionic surface active reagent, during cocoon cooking and silk reeling process which is mainly used in Korea and developed by one of the authors since 1965. Main purpose of the experiment is to investigate the influence of the activity of the reelability aid reagent on various degree of hardness component and various salts which are contained in filature water being used by silk factories now. Specifically, it was tried to determine the effects of the reelability aid reagent added to each sample water of artificially differentiated the degree of hardness component upon sericin solubility. Some of the major findings are summarized as follows. 1. "Seracol 100", with below 5$^{\circ}$dH water, increased sericin solubility in each sample water, but above $10^{\circ}$dH the effect of it shows a significant relationship with the different degree of hardness component. Besides the component (MgCO$_3$)$_4$ㆍMg(OH)$_2$, generally, the higher the degree of hardness in the water, the less the amount of desolved sericin in the water showed. There is little or no difference between 1000 times diluted "Seracol 100" water and 2000 times diluted "Seracol 100" water in terms of sericin solubility. 2. The different kind of degree of hardness component shows a significant relationship with sericin solubility, In case use of "Seracol 100", Mg hardness component affected on the sericin solubility more than Ca hardness. But in the control, contrary to this, that is Ca hardness component did more than Mg hardness, 3. The different kind of salts in degree of hardness component show a significant relationship with sericin solubility. In the control water, nitrate is the greatest among salts affecting on sericin solubility, next chloride and sulfate are in order. In case of "Seracol 100" water, chloride is the least among salts, below $10^{\circ}$dH, next sulfate and nitrate are in order, and above 15$^{\circ}$dH, next nitrate and sulfate are in order. 4. In case of "Seracol 100" water, the more contained heavy metal salts (Fe, Al, Cu, Mn) in the water, the less sericin solubility showed. It is found that there is little or no difference among other salts in terms of sericin solubility. But alkaline metal salt remarkably increased sericin solubility. 5. In case of "Seracol 100" water, tinting of the water was affected by Ca salts more than by Mg salts. Among other salts, only Al and Fe affected on the tinting of the water, specifically, in view of the fact that "Seracol 100" water increase the tinting of Fe salt water, but decrease the tinting of raw silk. It is thought that "Seracol 100" deter Fe$^{+2}$ from absorbing to raw silk by deteriorating the activity of Fe$^{+2}$ . 6. "Seracol 100" have the effect on osmosis of the water, After treatment until 2hrs the osmosis of 1000 times diluted "Seracol 100" water is the greatest, next orders are 2000 times diluted "Seracol 100" and control. From 2 hrs to 6 hrs the osmosis of 2000 times diluted water is the greatest, next orders are 1000 times diluted water and control. After 6 hrs the osmosis of the water is the same order as above. 7. In view of tile fact that "Seracol 100" have the effect to control the degree of hardness during the treatment of cocoon layer in the water, it is thought that, in varying degree of hardness in the water, there is a significant relationship between "Seracol 100" and degree of hardness components in cocoon layer.

• Korean journal of applied entomology
• /
• v.59 no.3
• /
• pp.265-275
• /
• 2020

In this study, we analyzed the nutritional ingredients of drone pupae (16^th to 20^th instar old) to evaluate the value of bee products and provide basic data for product diversification, and the extracts prepared using these pupae were tested for physiological activity. According to the analysis of the general ingredients of the freeze-dried powder of these bee pupae, the moisture, crude protein, crude fat, and crude ash was 1.69 ± 0.07%, 48.52 ± 0.20%, 23.41 ± 0.14%, and 4.05 ± 0.02%, respectively. Vitamin C and vitamin E were 14.92 ± 0.52 mg/100 g and 6.06 ± 0.11 mg α-TE/100 g, respectively. Regarding minerals, the highest content of K (1349.13 ± 34.57 mg/100 g) and P (1323.55 ± 43.85 mg/100 g) was observed and Ca and Fe were 55.43 ± 1.51 mg/100 g and 5.49 ± 0.19 mg/100 g, respectively. The fatty acids of the water extracted freeze-dried pupae powder accounted for approximately 59.62 of saturated fatty acids and 40.38 of unsaturated fatty acids, and high-quality fatty acids such as palmitic acid (C16:0) was 35.49 ± 0.08 and oleic acid (C18:1, n-9) was 35.91 ± 0.22 (g/100 g total fatty acids). The total amino acid content was 38.99 ± 2.63 g/100 g and the free amino acid was a total of 5129.04 mg/100 g, of which 1257.68 mg/100 g was proline and 759.12 mg/100 g glutamic acid. The DPPH (1,1-diphenyl-2-picrylhydrazyl) radical scavenging activity of the drone pupae extract showed values of 0.8 for distilled water extract, 3.2 for 50% EtOH extract, 6.4 for 70% EtOH extract, and approximately 90% for 32 ㎍/mL for 100% EtOH extract. These results suggest that the main compound contributing to the antioxidant activity is a polar compound, and it is highly likely to be a low-molecular protein or a free amino acid. In conclusion, the honey bee drone pupa is excellent as a food resource and can be utilized as a new functional material for food and functional food.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.1
• /
• pp.96-101
• /
• 2003

This study was done to analyze the contents of minerals, to compare the measured values of calcium and the labeled values in food labeling and to analyze the ratio of calcium to other minerals in 43 calcium-fortified Food products sold in markets in Seoul, Korea. Content of minerals such as Ca, P, Mg, Na, K, Fe, Cu, Zn was measured by atomic absorption or colorimetric method after dry-ashing or wet-ashing. The measured values of calcium were ranged 65.5~343.9% of the labeled values in 43 calcium-fortified products. In 21 calcium-fortified food products, the measured calcium values were ranged 120～160% of the labeled values, and in three drinks those were less than 80% of the labeled, which is not acceptable to the food regulation. The ratios of Ca:P were 2.63$\pm$1.99 (mean$\pm$SD) in grain Products, 1.79$\pm$0.39 in Ramyuns, 2.80$\pm$0.53 in retort pouch food products and 8.35$\pm$12.87 in drinks. The Ca:Fe ratios were 126.33$\pm$44.36 in grain products, 130.65$\pm$34.67 in Ramyuns, 120.31$\pm$71.15 in retort pouch food products and 700.25$\pm$553.70 in drinks. The ratios of Ca:Mg were 11.86$\pm$5.40 in grain products, 9.29$\pm$1.34 in Ramyuns, 9.09$\pm$2.09 in retort pouch food products and 32.50$\pm$41.35 in drinks. The P:Mg ratios were 4.11$\pm$1.54 in grain products, 4.17$\pm$0.67 in Ramyuns, 2.58$\pm$0.45 in retort pouch food Products and 2.59$\pm$2.50 in drinks. These results suggest calcium contents and the ratio of calcium contents to other minerals in calcium-fortified food products should be strictly controlled.