• 한국대기환경학회지
• /
• 제19권6호
• /
• pp.701-717
• /
• 2003

The objective of this study was to extensively estimate the air quality trends of the study area by surveying con-centration trends in months or seasons, after analyzing the mass concentration of PM-10 samples and the inorganic lements, ion, and total carbon in PM-10. Also, the study introduced to apply the PMF (Positive Matrix Factoriza-tion) model that is useful when absence of the source profile. Thus the model was thought to be suitable in Korea that often has few information about pollution sources. After obtaining results from the PMF modeling, the existing sources at the study area were qualitatively identified The PM-10 particles collected on quartz fiber filters by a PM-10 high-vol air sampler for 3 years (Mar. 1999∼Dec.2001) in Kyung Hee University. The 25 chemical species (Al, Mn, Ti, V, Cr, Fe, Ni, Cu, Zn, As, Se, Cd, Ba, Ce, Pb, Si, N $a^{#}$, N $H_4$$^{+}$, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$, C $l^{[-10]}$ , N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$, TC) were analyzed by ICP-AES, IC, and EA after executing proper pre - treatments of each sample filter. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols. the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided source profiles (scaled F matrix). So, 11 sources were qualitatively identified, such as secondary aerosol related source, soil related source, waste incineration source, field burning source, fossil fuel combustion source, industry related source, motor vehicle source, oil/coal combustion source, non-ferrous metal source, and aged sea- salt source, respectively.ively.y.

• 미래기술융합논문지
• /
• 제1권2호
• /
• pp.19-25
• /
• 2022

방사선 차폐 물질인 납을 대신하여 싸고 친환경적인 산화철, 알루미나로 차폐체를 제작 후 차폐체의 성능을 평가하고자 한다. 산화철과 알루미나 각각 석고와 혼합하여 차폐체를 제작 이후 X-ray Tube를 이용하여 석고보드, 납복과 비교하여 성능을 평가한다. 관전압에 변화를 주며 실험한 결과 알루미나의 차폐 성능은 석고보드보다 차폐 성능이 떨어졌으며 50%의 알루미나가 함유되었을 때 석고보드와 차폐 성능이 비슷하였다. 산화철은 약 75%가 함유되었을 때 납복의 차폐 성능과 비슷해졌다. 알루미나를 이용한 차폐체는 석고와 비슷한 차폐 성능을 보여줘 납 대체물질로 적합하지는 않다. 하지만 산화철은 납복과 비슷한 차폐 성능을 나타내어 향후 납을 대체하는 X선 차폐 물질로 활용이 가능하기에 추가 연구가 필요하다.

• 암석학회지
• /
• 제6권1호
• /
• pp.1-18
• /
• 1997

이 연구에서는 한반도 남해안 도서지역중 거제도 일대의 화산암류를 대상으로 암석 기재, 암석화학적 특성을 알아보고, 화산암류의 조구적 위치 및 성인에 대하여 고찰하고자 한다. 본 역의 화산암류는 백악기의 퇴적암층을 기반으로 피복하여 주로 안산암질 화성쇄설암과 용암류가 교호로 누적된 산상 즉, 최하부는 두터운 화산각력암, 응회각력암 및 라필리응회암 누층으로 구성되고, 상부로 감에 따라 상대적으로 안산암 용암류가 라필리응회암과 응회암을 협재하며 빈번하게 노출되고 최상부에는 데사이트-유문암질 용결회류응회암류가 분포한다. 본 역의 화산암류는 주성분 화학조성으로 볼 때, 현무암에서 현무암질안산암, 안산암, 데사이트 그리고 유문암에 이르는 넓은 성분 조성을 하며 전형적인 BAR조합을 나타낸다. 본 역의 화산암류는 칼크-알칼리암계열에 속하며, SiO2에 대한 K2O 성분에서 medium-K의 조성을 나타내고, La, Th 및 Nb 상관도에서 조산대안산암(orogenic andesite)의 영역에 도시된다. 미량원소 함량을 MORB값으로 표준화한 spider diagram에서 Sr, K, Rb, Ba, Th 등이 다른 원소에 비하여 상대적으로 높은 값을 가지는 반면, Nb, P, Ti, Cr의 함량이 낮은, 지판의 침강 섭입에 관련된 대륙연번부/도호의 조구적환경에 관련된 암석들에 나타나는 특징을 잘 나타낸다. 희토류원소를 chondrite로 표준화한 그림에서는 전체적으로 LREEs가 HREEs에 비하여 부화되어 있으며, 현무암에서 현무암질안산암, 안산암, 데사이트 및 유문암으로 감에따라 Eu의 '-'이상이 점진적으로 커지며, 변화패튼이 대체로 평행한 배영을 보여주므로 본 역의 암석들은 동원마그마에서 유래하였음을 알 수 있다. 지구조위치 판별도에서 본 역의 화산암류는 지판이 침강 섭입하는 지판경계부에서 생성된 마그마로부터 유래한 화산암의 조구적 위치 즉 정상적인 대륙연변호(normal continental margin arc)의 영역에 해당한다. 거제도지역의 화산암류는 약 10% 정도의 맨틀물질의 부분용융으로 형성된 현무암질 시원마그마가 생성되어 지각으로 상승하는 과정에서 분별되어 칼크-알칼리 안산암질 마그마가 형성되었으며, 이 마그마로부터 계속 분별결정작용, 동화작용 및 마그마 혼합 등의 과정을 거치면서 다양한 화산암류를 형성한 것으로 해석된다.

• 자원환경지질
• /
• 제39권6호
• /
• pp.753-770
• /
• 2006

도시지역에서 지하수오염은 도시화에 따른 토지용도에 크게 영향을 받는다. 본 연구는 철강, 기계 및 신발공장들이 밀집되어 있는 부산 사상공단지역의 지하수 수질과 오염 특성을 규명하는데 있다. 부산시는 우리나라의 대도시 중에서 가장 높은 지하수 이용를을 보이고 있다. $K^+,\;Na^+,\;Ca^{2+},\;Mg^{2+},\;Cl^-,\;SO_4^{2-},\;HCO_3^-$, 전기전도도(EC), 총용존물질(TDS) 그리고 염분농도는 낙동강에 가까운 지역에서 높게 나타나고 있다. 이러한 사실은 퇴적 당시 해안퇴적층에 들어온 염분의 영향이 아직까지 이 지역 지하수 수질에 미치고 있음을 지시한다. 또한 대표적인 지하수 수질형인 Ca-Cl형은 본 연구지역의 지하수가 인위적인 오염뿐만 아니라 퇴적물 속에 함유되어 있는 염분의 영향을 받고 있음을 지시한다. $SiO_2$ 이온은 물-규산염광물 작용과 콘크리트의 분해 산물로 해석된다. TCE는 총 18개소 중 12개소에서 검출되었으며, PCE는 4개소 그리고 TCA는 3개소에서 검출되었다. 요인분석에 의하면, 요인 1의 설명율은 49.8%, 요인2는 19.8% 그리고 요인 3은 11.0%이다. 요인 1에 높은 정의 적재율을 보이는 성분은 pH, TDS, 염분농도, $Ca^{2+},\;K^+,\;Mg^{2+},\;Na^+,\;Al^{3+},\;As^{3+},\;Cl^-,\;Fe^{2+}$으로서 이들은 공단의 특성과 염분의 영향을 동시에 대표하는 것으로 판단된다. 군집분석과 성분의 공간적 분포에 의하면, 낙동강변과 같이 해안퇴적층이 분포하여 염수의 영향을 받는 지역에서는 $Na^+,\;Ca^{2+},\;Cl^-,\;SO_4^{2-}\;K^+,\;Mg^{2+}$의 농도가 높게 나타남을 알 수 있다. 그리고 학장천의 하류에서는 염수의 영향과 인위적인 오염의 영향을 동시에 받고 있으며, 그 외 지역에서는 인위적인 오염의 영향이 우세함을 알 수 있다.

• 자원환경지질
• /
• 제23권1호
• /
• pp.35-57
• /
• 1990

This study has been carried out on the Pegmatites, Naedeogri Granites, Nonggeori Granites and Metasedimentary rocks in the middle area of Taebaeksan region to investigate the geochemical properties and possibility of productivity. Pegmatites are characterized by metamorphosed anatectic pegmatite and differentiated magmatic pegmatite, and are mixed type of rare-element pegmatite and mica-bearing pegmatite by the classification of Ginsburg(1979). The petrological type of the igneous rocks is thought to be calcalkali, subalkaline and peralumious. According to chemical variations against D. I., differentiation trends from Naedeogri and Nonggeori Granites through non-mineralized pegmatites to mineralized pegmatites are supposed. From the relationship between oxided and $SiO_2$, pegmatites and Nonggeori Granite have shown similar tendencies and bulk composition of pegmatites and similar to metasedimentary rocks near the intrusives. By judging the correlations of trace elements, it is elucidated that pegmatites adjacent to Naedeogri and Nonggeori Granites have been originated in magma differentiation from these granites and the others have been differentiated by remelting or partial melting from metasedimentary rocks. $Sp_5$, $Sp_8$, and $Sp_9$ pegmatites are considered as productive rocks, and $Sp_4$, $Sp_6$, $Sp_7$, $Sp_{10}$, $Sp_{11}$, and $Sp_{12}$ pegmatites and granites are supposed to have a weak productivity, in terms of element ratios related with Sn mineralizations. Tourmalines in productive pegmatites are formed under the circumstance of Li-poor granitoids and associated with pegmatites, and the others are seemed to be originated in metapelites and metapsammites which are not coexisting with an Al-saturating phase. Three types of chemical zoning are noticed in tourmalines: (1) apparently homogeneous compositional patterns, (2) a continuous core-to-rim zoning and, (3) a discontinuous core-to-rim zoning. From results of EPMA of tourmalines, Al, Mg and Ca increase closer to rim, while Fe decreases.

• 한국환경과학회지
• /
• 제9권3호
• /
• pp.241-252
• /
• 2000

Twenty-two water samples(fifteen groundwater and seven geothermal water samples) were collected to elucidate chemical characteristics of the ground and geothermal waters in the Haeundae hot spring area and its vicinity. Major and honor elements were analyzed for ground and geothermal water samples. The concentrations of $K^+$, Na+$, $Ca^{2+}$, $SO_4^{2-}$, $Cl^-$, ^F^-$ and $SiO_2$ were higher in the geothermal water samples than the groundwater samples except $HCO_3^- and Mg^{2+}$ ions. Based on the contents of Fe, Zn, Cu, Al, Mn and Pb, some of the ground and geothermal water samples are contaminated by anthropogenic sources. The ground waters shown on the Piper diagram belong to $Ca-HCO_3$ type, while the geothermal waters Na-Cl type. The graphs of $Cl^-$ versus $Na^+$, $Ca^{2+}, Mg^{2+}, K^+, SO_4^{2-} and HCO_3^-$ indicate that the groundwater is related partly with mineral-water reaction and partly with anthropogenic contamination, while the geothermal water is related with saline water. On the phase stability diagram, groundwater and thermal water mostly fall in the field of stability of kaolinite. This indicates that the ground and geothermal waters proceed with forming kaolinite. Factor and correlation analyses were carried out to simplify the physicochemical data into grouping some factors and to find interaction between them. Based on the Na-K, Na-K-Ca and Na-K-Ca-Mg geothermometers and silica geothermometers, the geothermal reservoir is estimated to have equilibrium temperature between 125${$\mid$circ}C$ and 160${$\mid$circ}C$.

• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.1-12
• /
• 2006

This work reviews the effects of catalyst formulation and exhaust gas composition on soot oxidation in CDPF (Catalytic Diesel Particulate Filter). DOC's (Diesel Oxidation Catalysts) have been loaded with Pt catalyst (Pt/$Al_{2}O_3$) for reduction of HC and CO. Recent CDPF's are coated with the Pt catalyst as well as additives like Mo, V, Ce, Co, Fe, La, Au, or Zr for the promotion of soot oxidation. Alkali (K, Na, Cs, Li) doping of metal catalyst tends to increase the activity of the catalysts in soot combustion. Effects of coexistence components are very important in the catalytic reaction of the soot. The soot oxidation rate of a few catalysts are improved by water vapor and NOx in the ambient. There are only a few reports available on the mechanism of the PM (particulate matter) oxidation on the catalysts. The mechanism of PM oxidation in the catalytic systems that meet new emission regulations of diesel engines has yet to be investigated. Future research will focus on catalysts that can not only oxidize PM at low temperature, but also reduce NOx, continuously self-cleaning diesel particulate filters, and selective catalysts for NOx reduction.

• 자원환경지질
• /
• 제25권3호
• /
• pp.225-232
• /
• 1992

The hydrothermal alteration is evaluated using multicomponent equilibrium calculations with the program CHILLER for the reactions between hydrothermal water and rhyolite at the temperature of $300^{\circ}C$ and pressure of 500 bars. The chemical-reaction model on the depositional processes of the sericitite confirms that the hydrothermal water-rock interaction(hydrothermal alteration) is the main mechanism of the sericitite formation. The principal change in the aqueous phase during the reaction is the pH increase. Overall trends for the major species are the increase in total molalities of K, Ca, $SiO_2$, Al, Mg, Fe, Na, and sulfide in solid phase with hydrothermal water-rhyolite reaction and the decrease of them in aqeous solution by precipitation of hydrothermal products. Quartz and sericite are the first minerals to form. The sequence of minerals to precipitate following them is chlorite, epidote, pyrite and microcline as water/rock ratio decreases. Although calculated results cannot duplicate the complexities of natural hydrothermal alteration, the calculation provides thermodynamic constraints on the natural process. The calculation results resemble those of experimental studies. Sericitite forms where pH decreases and water/rock ratio increases.

• 한국분말재료학회지
• /
• 제25권4호
• /
• pp.327-330
• /
• 2018

This study is conducted as a preliminary research to verify the feasibility of Ti-based Oxide dispersion strengthened (ODS) alloy. Pure-Ti powder is mixed with $Y_2O_3$ powder and subsequently, mechanically alloyed at $-150^{\circ}C$. The Ti-based ODS powder is hot-isostatically pressed and subsequently hot-rolled for recrystallization. The microstructure consists of elongated grains and Y excess fine particles. The oxide particle size is larger than that of the typical Fe-based ODS steel. Tensile test shows that the tensile ductility is approximately 25%, while the strength is significantly higher than that of pure Ti. The high-temperature hardness of the Ti-ODS alloy is also significantly higher than that of pure Ti at all temperatures, while being lower than that of Ti-6Al-4V. The dimple structure is well developed, and no evidence of cleavage fracture surface is observed in the fracture surface of the tensile specimen.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.69-69
• /
• 2010

The research is the structural and optical characteristics of the Cadmium Sulfide(CdS) film, nanowires and nanobelts grown on the $Al_2O_3$ substrate using the vapor phase epitaxy method. The field-emission scanning electron microscopy(FE-SEM) were used to identify the shape of the surface of the nanostructures and x-ray diffraction(XRD) and transmission electron microscopy (TEM) were used to evaluate the structural characterisitcs. As a result, the XRD was confirmed the CdS peak and the substrate peak and TEM showed single crystals with wurtzite hexagonal structure on the nanostructures. As for the optical characteristic of the nanostructures, photoluminescence(PL) and micro-raman spectrum were measured. The PL measurements confirmed the emission peak related bound exciton to neutral donor($D^0X$) peak and free exciton(FX) peak. The micro-raman spectrum showed that the peak of the nanostructures were similar to the pure crystalline CdS peak and each peak were overtone of LO phonon of the hexagonal CdS of the longitudinal optical(LO) phonon mode. Therefore, it is confirmed that the CdS nanostructures grown in this research have superior crystallinity.