• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.141-141
• /
• 2000

In situ surface magneto-optic Kerr effect(SMOKE), X-ray photoelectron spectroscopy(XPS) and low energy electron diffraction(LEED) were used to study magnetic and structural properties of ultrathin Fe films grown on the Pd(111) surface. The SMOKE measurement showed strong enhancement of ferromagnetism after proper annealing process. Simultaneous changes in morphology was checked by LEED and XPS. After room temperature Fe deposition. longitudinal magnetization appeared above a critical thickness between 2.0 and 2.5 monolayers. When annealed at 450K, 2.0 monolayer Fe film exhibited boty longitudinal and polar magnetizations while 3.0 and 5.5 monolayer films showed little changes. After annealing at 600K, both magnetizations were totally destroyed in 2.0 monolayer film, but longitudinal magnetization was enhanced in 3.0 monolayer film. In the case of 5.5 monolayer film, it was only after 660K annealing that the enhancement of the longitudinal magnetization was observed. It was concluded that the surface flatness and the amount of intermixing were critical in the development of surface magnetism of this system.

• Journal of Magnetics
• /
• v.9 no.4
• /
• pp.97-100
• /
• 2004

In the present work exchange coupling between ultrathin Fe ($8{\AA}$) and Tb ($12{\AA}$) layers separated by Au spacer of varied thickness ($3-20{\AA}$) was studied. Anomalous Hall effect measurements showed weakly damped oscillating dependence of the Hall conductivity as a function of Au spacer thickness. Disagreement of the observed damping with the RKKY model of interlayer exchange coupling was explained by the influence of external magnetic field on the behaviour of exchange coupling oscillations. It was confirmed by Hall-like effect measurements at zero applied magnetic field and also illustrated by corresponding estimations.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.135-135
• /
• 2003

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.173.1-173.1
• /
• 2014

The variations of electronic and magnetic properties of ultrathin Fe overlayers on a W(001) surface as a function of Fe film thickness (1.0~4.0 ML) has been investigated using x-ray magnetic circular dichroism (XMCD) in conjunction with ultraviolet photoelectron spectroscopy (UPS) and low energy electron diffraction (LEED). We found that the ferromagnetic property of Fe film started to build up over 2.0 ML, as we confirmed the spin and angular moment contribution to the magnetic moment using XMCD experiments. We will systematically demonstrate that the occurrence of ferromagnetic property of Fe film on a W(001) surface is closely correlated to a themally stable layer of Fe film on a W(001) surface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.339-339
• /
• 2009

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.355-355
• /
• 2010

The epitaxial growth of MgO film on Fe(001) has been investigated by scanning tunneling microscopy (STM). After confirming the clean Fe(001)-c($2{\times}2$) substrate by STM, Mg was deposited at room temperature (RT) under $O_2$ partial pressure of $10^{-7}\;Torr$. The MgO was grown as clusters, not as an epilayer even after postannealing at $400^{\circ}C$, as shown in Figure (a). On the contrary, when Mg was deposited on Fe(001)-c($2{\times}2$) at RT and post-oxidized through exposing $O_2$ at partial pressure $10^{-7}\;Torr$, the thin-layered film with some clusters was formed. Extended-annealing at $400^{\circ}C$ reduced the cluster density, and finally the single and epitaxial MgO-c($2{\times}2$) film was formed on Fe(001)-c($2{\times}2$) as shown in Figure (b). This ultrathin MgO film formed on Fe is expected to be applied to many technological applications, such as catalysis, microelectronics, and magnetic devices.

• Journal of the Korean Vacuum Society
• /
• v.17 no.3
• /
• pp.183-188
• /
• 2008

We have studied the chemisorption of oxygen at room temperature on Fe layers deposited on Pt(111) substrates by using core-level X-ray photoelectron spectroscopy. It was found that the oxygen atoms are chemisorbed when the thickness of the Fe layers is not larger than 6 monolayers. Upon post-annealing, it was found that part of the chemisorbed atoms are desorbed at a temperature range 600 - 700 K, after which the intermixing between Fe and Pt atoms occurs. The overall trend of this intermixing was very similar to the Fe/Pt(111) surface without oxygen exposure. The remaining oxygen adatoms, the amount of which is about a half of the total, were found to be eventually desorbed from the surface upon post-annealing at 1000 K. The binding energy of this phase was higher than that of the oxygen atoms desorbed at lower temperatures by 1.3 eV.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2006.02a
• /
• pp.72-72
• /
• 2006

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.237-237
• /
• 2006

P(VDF/TrFE(72/28) ultrathin films were used in the fabrication of Metal-Ferroelectric polymer-Metal (MFM) single bit device with special emphasis on uniform film surface, faster dipole switching time under applied external field and longer memory retention time. AFM and FTIR-GIRAS were complementary in analyzing surface crystalline morphology and the resultant change in chain orientation with varying thermal history. DC-EFM technique was used to 'write-read-erase' the data on the memory bit in a much faster time than P-E studies. The results obtained from this study will enable us to have a good understanding of the ferroelectric and piezoelectric behavior of P(VDF/TrFE)(72/28) thin films suitable for high density data storage applications.

• Journal of the Korean Magnetics Society
• /
• v.20 no.6
• /
• pp.212-215
• /
• 2010

Spin polarized tunneling studies were carried out with Al-Ga bilayer as a spin detector, by Meservey-Tedrow technique. The superconductor (SC)/Insulator (I)/Ferromagnet (FM) tunnel junctions were provided by ultra high vacuum molecular beam epitaxy (UHV-MBE) technique. The analysis of interfacial properties in the Al-Ga bilayer was also carried out by Auger electron spectroscopy. It was observed that the superconducting transition temperature and energy gap were raised in comparison with that of bulk Ga and pure ultrathin Al films. Current studies clearly show how one can modify the material properties at the interface just with a few monolayers.