• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.6
• /
• pp.976-982
• /
• 2007

This study investigated whether supplemental Cu, Fe, Zn, and Mn are needed in a practical diet for pullets. Four hundred and twenty females of an egg-laying strain (1-d-old, Lohmann Brown Layer) were randomly distributed into 4 groups, consisting of 7 replicates of 15 birds each. During the 18-week experimental period, chicks were given three basal diets in sequence, each with single or multiple Mn, Zn and Cu supplementation to improve the mineral balance gradually. In the Control, no Mn, Zn, and Cu were added; in the single Mn supplemented group (sMn) Mn was added to 120, 60, and 60 mg/kg for 1-6, 7-12, and 13-18 weeks of age, respectively; in the multiple Mn and Zn supplemented group (mMnZn), Mn was added to 180, 90, and 90 mg/kg and Zn was added to 120, 105, and 105 mg/kg for 1-6, 7-12, and 13-18 weeks of age, respectively; in the multiple Mn, Zn, Cu supplemented group (mMnZnCu), Mn, Zn, and Cu were added to the same multiple of basal Fe concentration relative to NRC (1994) recommendations. Energy and protein metabolizability were determined by subtracting energy/protein intake by energy/protein excretion (from both feces and urine) and dividing by energy/protein intake. There were no statistically significant differences between groups in terms of feed intake, final body weight or tibia length throughout the experiment. Optimal growth performance was observed in the Control, while adding trace minerals to basal diets tended to result in decreased productive performance. Protein metabolizability was increased by mMnZn and mMnZnCu treatments, but energy metabolizability was not affected. Concentrations of Mn, Zn, Cu in excreta varied greatly related to dietary content, and the retentions of Cu, Fe, Zn and Mn were all increased due to the improvement of mineral balance. Based on these results, it is suggested that the concentrations of Cu, Fe, Zn and Mn in typical basal diets used in this study were adequate for normal growth for pullets from 1 to 18 weeks of age.

• Environmental Engineering Research
• /
• v.23 no.2
• /
• pp.181-188
• /
• 2018

Photocatalytic oxidation in the presence of Fe-doped, Zn-doped or Fe-Zn co-doped $TiO_2$ was used to effectively decompose humic acids (HAs) in water. The highest HAs removal efficiency (65.7%) was achieved in the presence of $500^{\circ}C$ calcined 0.0010% Fe-Zn co-doped $TiO_2$ with the Fe:Zn ratio of 3:2. The initial solution pH value, inorganic cations and anions also affected the catalyst photocatalytic ability. The HAs removal for the initial pH of 2 was the highest, and for the pH of 6 was the lowest. The photocatalytic oxidation of HAs was enhanced with the increase of the $Ca^{2+}$ or $Mg^{2+}$ concentration, and reduced when concentrations of some anions increased. The inhibition order of the anions on $TiO_2$ photocatalytic activities was $CO{_3}^{2-}$ > $HCO_3{^-}$ > $Cl^-$, but a slightly promotion was achieved when $SO{_4}^{2-}$ was added. Total organic carbon (TOC) removal was used to evaluate the actual HAs mineralization degree caused by the $500^{\circ}C$ calcined 0.0010% Fe-Zn (3:2) co-doped $TiO_2$. For tap water added with HAs, the $UV_{254}$ and TOC removal rates were 57.2% and 49.9%, respectively. The $UV_{254}$ removal efficiency was higher than that of TOC because of the generation of intermediates that could significantly reduce the $UV_{254}$, but not the TOC.

• Korean Journal of Environment and Ecology
• /
• v.14 no.2
• /
• pp.119-126
• /
• 2000

충남 사문암 지역인 광천, 홍성, 백동, 대흥 및 유구지역의 토양, 식물체(참억새, 쑥, 리기다소나무) 및 지표수, 갱내수의 중금속 함량을 분석한 결과 사문암 토양의 Ni, Cr 및 Co 원소가 변성암 토양에 비하여 10~13배높았으며 이 원소들이 serpentine factor로 생각된다 사문암 지역간에는 이들원소의 차이가 뚜렷하지 않았다 변성암 토양식물에서보다 사문암 토양 식물에서 Ni, Cr, Co등이 높았다 리기다소나무의 원소 흡수량은 비교적 낮았고 3종 식물에서 대체로 뿌리의 원소 함량이 지상부 함량보다 높았으며 사문암 토양에서는 Ni, Cr, Co, Mo, Sc, As 및 Fe 원소들이 쑥보다 참억새에서 높았다 사문암 토양에서 생육하는 식물체 지상부의 생물학적 흡수계수는 Ni, Cr, Co, Zn, Sc, As 및 Fe 원소는 참억새에 높고Zn은 쑥에서 높았다,. 사문암 토양에서 뿌리로부터 지상부로의 원소 전이는 Ni, Cr, Co, Zn As 및 Fe 원소에 대해 쑥에서 높았고 Mo와 Sc 원소는 리기다소나무에서 높았다. 따라서 사문암 토양에서 참억새가 중금속의 흡수율은 높고 중금속에 대한 내성은 강할 것으로 사료된다 대흥지역에서 광산의 오염이 지표수 및 갱내수의 Ni. Cr, Co, Zn 및 Fe 등의 원소 농도를 높게 하였으며 비오염 계류는 오염계류의 원소 농도를 희석시켰다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2270-2275
• /
• 2011

The sintering behavior and microwave properties of ferrite ($Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics) were investigated for microwave applications. Also PIFA type antenna with ferrite was simulated. All samples were prepared by the solid state reaction method and sintered at $1350^{\circ}C$. All ceramics had relatively density above of 92% compare with theoretical density of $Ba_3Co_2Fe_{24}O_{41}$ ceramics. From the XRD pattens, the Z-type phase was existed as main phase in $Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics. The permittivity and permeability of $Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics were increased with Zn additions and decreased rapidly over frequency of 200~600 MHz. Several PIFA type antennas with ferrite and FR4 were simulated. All antenna structure had return loss of less than -10 dB at each resonant frequency. Simulated antenna using both ferrite and FR4 showed size reduction of 25% without a significant decrement of efficiency.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.3
• /
• pp.222-229
• /
• 1993

Total suspended particles in the atmosphere were collected on the quartz fiber filters using an ANdersen Hi-volume air sampler from March 1989 to October 1989 and from June 1990 to February 1991, at Chung-Ang University in Seoul. A total amount of eight heavy metals (Cr, Zn, Cd, Pb, Fe, V, Ti, Mn) in total suspended particles were determined by ICP spectrophotometer. The annual arithmetic mean concentration of total suspended particle was 162.3$\mug/m^3$ and eight metals(Cr, Zn, Cd, Pb, Fe, V, Ti, Mn) were 11.6, 609.2, 3.5, 337.1, 2739.5, 15.1, 89.4 and 100.5ng/$m^3$, respectively. The concentration of total suspended particle was highest in the spring(343.7$\mug/m^3$) and lowest in the summer(91.8$\mug/m^3$). These heavy metals were distinguished into two groups in terms of their particle size distribution. The contents of first-group heavy metals (Fe, Ti, Mn) were increased in accordance with the growth of the particle size. The contents of the second-group ones such as Pb, Cd, V, and Zn, on the contrary, came to increase according as the particle size reduced. Statistical analysis indicated that there was a correlation between total suspended particle and Fe in coarse particles, and between total Suspended Particle and Zn, Pb in fine particle.

• Journal of Powder Materials
• /
• v.9 no.6
• /
• pp.449-454
• /
• 2002

$MnxZn_{1-x}Fe_2O_4$ (x=0.69~0.74) powders synthesized by the thermal decomposition of organic acid salts. The obtained powders were uniform in composition and ultra-fine particle with about 400 nm. The amount of spinel phase of these powders was about 50% in X-ray diffraction patterns. The calcination of powder was carried out at $900^{\circ}C$ for 2 hours in air. After the powders were calcined. the mean size of powder was about 500 nm and the amount of spinel phase was increased over about 65%. The maximum amount of spinel phase was about 75% in the specimen of X=0.72. The magnetic properties of calcined $Mn_{0.72}Zn_{0.28}Fe_2O_4$ powders were the best among the different among the different compositions.

• Journal of Korea Foundry Society
• /
• v.32 no.2
• /
• pp.86-90
• /
• 2012

Aluminium-silicon based casting alloys have received an attention for high electrical and thermal conductivity applications, however relatively low conductivity of Al-Si alloys often limits the application. Efforts have been made to develop new high conductivity aluminium casting alloys containing no or less silicon. In this study Al-Zn-Fe based alloys were selected as the new alloys, and the effect of Mg additions on their properties and casting characteristics were investigated. As the magnesium content was increased, the tensile strength of Al-2Zn-0.2Fe based alloy was remarkably increased, while the electrical conductivity was deteriorated. It was observed that the fluidity of the alloys was generally inversely proportional to the Mg content but the hot cracking resistance was rather proportional to it. Cooling curve analyses were carried out to measure the actual solidification range and dendrite coherency temperature.

• Journal of Environmental Science International
• /
• v.10 no.1
• /
• pp.27-33
• /
• 2001

In order to study the long-term change of heavy metal concentrations in the Kumho river water, water analysis was conducted at 13sites surrounding the Kumho river system for 18times from September 1993 to August 1999. Analytical items for the study of water quality are Cu, Zn, Cd, Cr, Fe, Mn and Pb. The six year term studied in this work was divided into Part I and Part II, which covers the period from September 1993 to August 1996 and the period from September 1996 to August 1999, respectively. The mean concentrations of Cu, Zn, Cd, Cr, Fe, Mn and Pb in the unit of ppm for the Part I period showed 0.032, 0.025, 0.006, 0.050, 0.053 and 0.019, respectively. The mean concentrations of Cu, Zn, Cd, Cr, Fe, Mn and Pb in the unit of ppm for the Part II period showed 0.001, 0.001, 0.001, 0.004, 0.020, 0.002 and 0.002, respectively. The heavy metal concentrations in the Kumho river water for te second period were found to be decreased by 1/32, 1/25, 1/6, 1/1.5, 1/2.5, 1/26.5 and 1/9.5 for Cu, Zn, Cd, Cr, Fe, Mn and Pb, respectively. The present results clearly indicate that the water quality in the Kumho river is improving in terms of heavy metal contaminations.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.459-466
• /
• 2007

In this study, H-type beta zeolites (BEA) having various metals were used as the adsorbent for the removal of sulfur containing odorants. The different adsorbents containing single or bimetals were utilized to investigate the performance in the individual adsorption of TBM and THT odorants or in the competitive adsorption between them by using a continuous adsorptive bed system. The result shows that the pure H-type BEA zeolite exhibited the highest adsorption capacity for TBM compound, but the higher amount of THT was removed and adsorbed on a HBEA adsorbent having Fe, Pd metal and ZnO oxide. In the case of bimetal containing adsorbents, Cu-Zn/HBEA and Fe-Mo/HBEA showed a higher adsorption capacity for TBM.

• Journal of Korea Foundry Society
• /
• v.33 no.6
• /
• pp.242-247
• /
• 2013

The most widely utilized commercial, aluminum-casting alloys are based on an aluminum-silicon system due to its excellent casting, and good mechanical, properties. Unfortunately, these Al-Si based alloys are inherently poor energy conductors; compared to pure aluminum, because of their high silicon content. This means that they are not suitable for applications demanding high eletrical or thermal conductivity. Therefore, efforts are currently being made to develop new, highly-conductive aluminum-casting alloys containing no silicon. In this research, a number of properties; including potential for castability, were investigated for a number of Al-Fe-Zn-Cu alloys with varying Cu content. As the copper content was increased, the tensile strength of Al-Fe-Zn-Cu alloy tended to increase gradually, while the electrical conductivity was slightly reduced. Fluidity was found to be lower in high-Cu alloys, and susceptibility to hot-cracking was generally high in all the alloys investigated.