• Bulletin of the Korean Chemical Society
• /
• 제28권11호
• /
• pp.2089-2092
• /
• 2007

Tantalum-containing metal oxides, well known for their efficiency in water splitting and H2 production, have never been used in visible light driven photodecomposition of H2S and H2 production. The present work is an attempt in this direction and investigates their efficiency. A mixed metal oxide, ZnFe2Ta2O9, with the inclusion of Fe2O3 to impart color, was prepared by the conventional ceramic route in single- and double-calcinations (represented as ZnFe2Ta2O9-SC and ZnFe2Ta2O9-DC respectively). The XRD characterization shows that both have identical patterns and reveals tetragonal structure to a major extent and a minor contribution of orthorhombic crystalline system. The UV-visible diffuse reflection spectra demonstrate the intense, coherent and wide absorption of visible light by both the catalysts, with absorption edge at 650 nm, giving rise to a band gap of 1.9 eV. Between the two catalysts, however, ZnFe2Ta2O9-DC has greater absorption in almost the entire wavelength region, which accounts for its strong brown coloration than ZnFe2Ta2O9-SC when viewed by the naked eye. In photocatalysis, both catalysts decompose H2S under visible light irradiation (λ ≥ 420 nm) and produce solar H2 at a much higher rate than previously reported catalysts. Nevertheless, ZnFe2Ta2O9-DC distinguishes itself from ZnFe2Ta2O9-SC by exhibiting a higher efficiency because of its greater light absorption. Altogether, the tantalum-containing mixed metal oxide proves its efficient catalytic role in H2S decomposition and H2 production process also.

• Clean Technology
• /
• 제21권1호
• /
• pp.39-44
• /
• 2015

This study investigated the effects of six metal oxide nanoparticles (NPs: CuO, NiO, TiO₂, Fe₂O₃, Co₃O₄, ZnO) on seed germination and germination index (G.I) for five types of seeds: Brassica napus L., Malva verticillata L., Brassica olercea L., Brassica campestris L., Daucus carota L. NPs of CuO, ZnO, NiO show significant toxicity impacts on seed activities [CuO (6-27 mg/L), ZnO (16-86 mg/L), NiO (48-112 mg/L)], while no significant effects were observed at > 1000 mg/L of TiO₂, Fe₂O₃, Co₃O₄. Tested five types of seed showed different sensitivities on seed germination and root activity, especially on NPs of CuO, ZnO, NiO. Malva verticillata L. seed was highly sensitive to toxic metal oxide NPs and showed following EC₅₀s : CuO 5.5 mg/L, ZnO 16.4 mg/L, NiO 53.4 mg/L. Mostly following order of toxicity was observed, CuO > ZnO > NiO > Fe₂O₃ ≈ Co₃O₄ ≈ TiO₂, where slightly different toxicity order was observed for carrot, showing CuO > NiO ≈ ZnO > Fe₂O₃ ≈ Co₃O₄ ≈ TiO₂.

• Journal of the Korean Magnetics Society
• /
• 제17권1호
• /
• pp.26-29
• /
• 2007

Fe-based powders, Fe-M(M=Cr, Mn, Cu, Zn), were prepared in Ar gas by mechanical alloying and their crystallographic and magnetic properties were investigated. X-ray diffraction indicates that the cubic lattice parameter increases for the M substitution. The distance of closest approach around M can explained the increase of lattice constant in Fe-M powders. $M\"{o}ssbauer$ spectroscopy measurements on Fe-M samples indicates the coexistence of ferromagnetic phases and paramagnetic phase that are created by the distribution of local environment M on Fe atom. On the other hand, The spread of line-width on $M\"{o}ssbauer$ spectra can be explained by the distribution of hyperfine magnetic fields. The results of quadrupole shift and isomer shift revealed that M substitutions in Fe-M powders didn't change both structure and the local charge distribution around Fe atom severely.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 한국표면공학회 2000년도 춘계학술발표회 초록집
• /
• pp.22-22
• /
• 2000

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 한국표면공학회 1999년도 춘계학술발표회 초록집
• /
• pp.85-85
• /
• 1999

• Journal of Korea Foundry Society
• /
• 제33권1호
• /
• pp.8-12
• /
• 2013

Although aluminum-silicon based commercial casting alloys have been used in applications that demand high electrical or thermal conductivity, new aluminum casting alloys that possess higher conductivities are currently required for advanced applications. Therefore, there is much research into the development of new high conductivity aluminum casting alloys that contain lower amounts of or no silicon. In this research, the properties and casting characteristics of Al-Zn-Fe-Si alloys with various Fe and Si contents were investigated. Two types of AlFeSi phases were formed depending on the Fe and Si contents. As the silicon content increased, the tensile strength of the Al-Zn-Fe-Si alloy increased slightly, while the electrical conductivity decreased slightly. It was also observed that both the fluidity and hot cracking susceptibility of the investigated alloys were closely related to the formation of the AlFeSi phases.

• Journal of the Korean Magnetics Society
• /
• 제15권2호
• /
• pp.137-141
• /
• 2005

The CMR properties and magnetic properties of sulphospinels $Zn_xFe_{1-x}Cr_2S_4$ have been explored by X-ray diffraction, magnetoresistance measurement, and $M\ddot{o}ssbauer$ spectroscopy. The crystal structures in the range of x=0.05, 0.1, 0.2 are cubic at room temperature. Magnetoresistance measurement indicates that these system is semiconducting below about 160 K. The temperature of maximum magnetoresistance is almost consistent with Curie temperature. The Zn substitutions for Fe occur to increase the Jahn-Teller relaxation and the electric quadrupole shift. CMR properties could be explained with Jahn-Teller effect, and half-metallic electronic structure, which is different from both the double exchange interactions of manganite La-Ca-Mn-O system and the triple exchange interactions of chalcogenide $Cu_xFe_{1-x}Cr_2S_4$.

• 한국해양학회지
• /
• 제18권1호
• /
• pp.29-42
• /
• 1983

This stidy was intended to investigate the heavy metal contents in the bottom sediments of the continental shelt around the Jeju Island and ot the southern coastal area of the Korean Peninsula. For this study 39 bottom sedinent samples were taken from the study area using Phleger gramity corer and Snapper. The average contents of heavy metals were 59.1 ppm Zn, 362.6 ppm Mn, 63.8 ppm Cr, 15.7 ppm Pb, 10.0 ppm Co, 28.9 ppm Ni, 10.5 ppm Cu, and 2.7% Fe in the surficial sediments around the Jejr Island; and 79.ppm Zn, 384 ppm Mn, 8.6 ppm Pb, 17.8 ppm Ni, 23.2 ppm Cu, and 1.59 % fe in those of nearsgore of the southern coastal area respectively. The heavy metal contents were higher in the northwestern part around the Jeju Island compared to those in other region. However, these tendencies were not the result of pollution, but of the differences of grain size of the sedimenrs. In the nearshore of the southern coast, the heavy metal contents did not show any geographical tendency. However, those of Masan and Jinhae Bays wew higher than those of the other region. These seemed to be caused by waste disposal from the industrial compsex located at the adjacent land. Nevertheless these values of heavy metal content except for Zn and Cu in Masan Bay and inner bay of Jinhae are lower than the average values of the each world-wide data of the nearshore sedimentl. The pair correlations of the cach heavy metal elements were calculated by regressino analysis using VAX 780 computer. the following pair elements, such as Zn-Cu, Ni-Cu, Fe-cu, Cr-Cu, Co-Zn, Ni-Zn, Cr-Zn, Ni-Co, Fe-Co, Cr-Co, Fe-Ni, Cr-Ni and Cr-Fe show closely posetive linear correlations in the sediments around the Jeju Island. In general, the heavy metal content increases in proportion to the increase of the mean values of the grain size of the sediments around the Jeju Island. In the southern coastal area, in gineral, thepair correlations of each heavy metal elements did not southern coastal area, in general, the pair correlatttttions of rach heavy metal elements did not show any positive correlation except for the positive linear correlations of Cu-Zn, Cu-ni and Ni-Mn. It is interpreted as a result of the differences of the physecochemical environment of the sampling sites and also of the influences of the ondustrial wastes from the manufacturing factores located at the coastal zone of the study area.

• Journal of Food Hygiene and Safety
• /
• 제31권6호
• /
• pp.420-425
• /
• 2016

The present study aimed to calcium (Ca), iron (Fe) and zinc (Zn) contents were compared with reference values indicated on the nutrition label of nutrition emphasized food. Also, this paper will briefly review and evaluate what is currently known about Fe-Zn and Ca-Fe interaction. Ca, Fe or Zn-emphasized product, including cereal, snack, soy milk, chocolate product, other cocoa product, sugars product, beverage and tea were analyzed. The contents of Ca, Fe, and Zn in samples after dry-ashing were examined by ICP. The measured Ca (n = 42), Fe (n = 13), Zn (n = 6) values were ranged 87~176%, 98~167%, 98~275% of reference value indicated product, respectively. All samples were ranged more than 80% of the reference value, which were complied with food regulation. High intake of Ca has been shown to adversely affect Fe absorption and the negative effect of Fe on Zn absorption is well known. Therefore, it is important to consider Ca-Fe and Fe-Zn absorption interaction, when Ca, Fe or Zn-emphasized product produce and nutrition labeling policy should be managed regularly with continuous monitoring.

• Journal of Pharmaceutical Investigation
• /
• 제36권6호
• /
• pp.371-375
• /
• 2006

Neomycin coupled to a polymer matrix via a metal linker was prepared and evaluated for prolonging antibacterial activity. Microcrystallized cellulose was chemically modified to cellulose xanthate(MCX) to afford metal binding sites. MCX was treated with Cu(II), Fe(III) or Zn(II) followed by reaction with neomycin (Ne). The release of Ne from MCX-Zn(II)-Ne was investigated and its activity duration was measured by ditch plate method. The amount of metal bound to MCX was 0.36 mmol/g matrix, 0.26 mmol/g matrix and 0.56 mmol/g matrix for Cu(II), Zn(II) and Fe(III), respectively. Ne bound to MCX-metal chelates was 0.006 mmol, 0.07 mmol and 0.01 mmol per g MCX for Cu(II), Zn(II) and Fe(III), respectively. The Ne release from MCX-Zn(II)-Ne was sustained even after seven washes, whereas Ne from MC/Zn(II)/Ne mixture was almost completely released in two washes. Antibacterial activity was prolonged with MCX-Zn(II)-Ne and MCX-Fe(III)-Ne, but not with MCX-Cu(II)-Ne when compared with that of free Ne. Taken together, these results suggest that neomycin coupled to MCX via a proper metal linker has a potential as a polymeric antibacterial agent with sustained activity.