• 대한조선학회논문집
• /
• 제49권3호
• /
• pp.254-263
• /
• 2012

The survivability of warship is assessed by susceptibility, vulnerability and recoverability. Essentially, a vulnerability assessment is a measure of the effectiveness of a warship to resist hostile weapon effects. Considering the shot line and its penetration effect on the warship, present study introduces the procedural aspects of vulnerability assessments of warship. Present study also considers the prediction of penetration damage to a target caused by the impact of projectiles. It reflects the interaction between the weapon and the target from a perspective of vulnerable area method and COVART model. The shotline and tracing calculation have been directly integrated into the vulnerability assessment method based on the penetration equation empirically obtained. A simplified geometric description of the desired target and specification of a threat type is incorporated with the penetration effect. This study describes how to expand the vulnerable area assessment method to the penetration effect. Finally, an example shows that the proposed method can provide the vulnerability parameters of the warship or its component under threat being hit through tracing the shotline path thereby enabling the vulnerability calculation. In addition, the proposed procedure enabling the calculation of the component's multi-hit vulnerability introduces a propulsion system in dealing with redundant Non-overlapping components.

• 한국안전학회지
• /
• 제32권4호
• /
• pp.7-15
• /
• 2017

International standards such as IEC-61508 and IEC-61511 require Safety Integrity Levels (SILs) for Safety Instrumented Functions (SIFs) in process industries. SIL verification is one of the methods for process safety description. Results of the SIL verification in some cases indicated that several Safety Instrumented Functions (SIFs) do not satisfy the required SIL. This results in some problems in terms of cost and risks to the industries. This study has been performed to improve the reliability of a safety instrumented function (SIF) installed in hydrodesulfurization reactor heater using Partial Stroke Testing (PST). Emergency shutdown system was chosen as an SIF in this study. SIL verification has been performed for cases chosen through the layer of protection analysis method. The probability of failure on demands (PFDs) for SIFs in fault tree analysis was $4.82{\times}10^{-3}$. As a result, the SIFs were unsuitable for the needed RRF, although they were capable of satisfying their target SIL 2. So, different PST intervals from 1 to 4 years were applied to the SIFs. It was found that the PFD of SIFs was $2.13{\times}10^{-3}$ and the RRF was 469 at the PST interval of one year, and this satisfies the RRF requirements in this case. It was also found that shorter interval of PST caused higher reliability of the SIF.

• 한국산학기술학회논문지
• /
• 제19권8호
• /
• pp.239-245
• /
• 2018

최근 무기체계의 개발에서 핵심부품 구성품의 신뢰성 시험이 국방전력발전 업무훈령 규정에 반영되고 각 종 부품의 복잡도의 증가로 인하여서 신뢰성의 중요도가 강조되고 있고 그에 따라서 신뢰성 시험의 중요성 또한 강조되고 있다. 또한 핵심 구성품의 수명시험 비용과 기간을 단축하기 위해서는 가속수명시험 기법의 적절한 적용이 요구되어 있다. 그러므로 본 논문에서는 헬기에 장착되는 블래더형 축압기를 대상으로 한 신뢰성시험 설계 방법을 연구하고 신뢰성 시험 설계에 필요한 프로세스를 제시 하였다. 축압기의 신뢰성 시험을 설계하기 위해 고장률예측, 고장모드 영향 분석, 고장나무분석 등의 기법을 이용하여 주요 고장모드와 고장 메커니즘을 조사하고 2-Stage QFD를 통하여서 각 고장모드의 우선순위 및 중요도를 체크함과 동시에 주요 스트레스 인자를 분석하여 적절한 가속 모델을 선택했다. 그리고 필요 시료 수와 신뢰도 수준 및 각각의 스트레스 조건에 따라서 무고장 시험 설계법을 참고하여 정상상태의 신뢰성시험을 설계하였고 또한 선택한 가속 모델을 사용하여 계산한 가속계수에 따라 가속 수명시험시간을 계산하였다.

• 한국해양환경ㆍ에너지학회지
• /
• 제13권2호
• /
• pp.121-125
• /
• 2010

지중 저장기술은 대기로 방출되는 이산화탄소를 저감하는 기술로서 기후변화를 발생하는 온실효과를 저감 시킬 수 있다. 해양 저지대에 위치한 심층 대수층 혹은 폐유전 등은 이러한 이산화탄소 저장기술의 중요한 후보군이라고 할 수 있다. 관련된 이산화탄소 주입 및 저장기술은 전 세계적으로도 많은 관심을 받고 있으나, 이러한 시스템에서 이산화탄소 누출이 발생하였을 때의 부정적 영향에 대해서는 아직 심도 있는 연구는 진행되지 못하고 있다. 이산화탄소 저장기술의 안정성이 매우 높아서 누출의 가능성은 매우 낮다고 하더라도, 고농도의 이산화탄소가 만약의 사태에서 누출이 된다면 여전히 해양생태계 및 환경에 위험이 있을 수 있다. 그러나 이에 대한 연구가 충분히 이루어지지 않았기에, 본 연구에서는 하나의 신뢰성 및 위해성 평가방법을 소개하고자 한다. Feature, Event and Process(FEP)를 통해 다양한 요소를 고려하고, 결함수 분석을 통해 신뢰도를 평가하는 방법을 제안한다. 이러한 FEP 분석으로 시스템에서 시공 및 운영과정에서 발생할 수 있는 다양한 누출 가능성을 평가하는 방법을 소개하였다.

• 한국화재소방학회논문지
• /
• 제18권3호
• /
• pp.57-73
• /
• 2004

Pilot LNG Tank에서 LNG가 누출되어 화재가 발생할 경우의 정량적 안전성 평가를 고장수목법을 이용하여 4가지 형태의 주요 시나리오를 도출하고 이에 대한 분석을 수행하였다. 첫째 방출관에서 누출할 경우에 특정 Low Flammable Limit(LFL)반경은 형성하지 않았으며, 둘째는 탱크파손으로 인한 LNG 유출이라는 최악의 시나리오 분석을 수행하였고, 그 결과를 살펴보면 총 누출량이 같더라도 시간에 따라 여러 가지 확산범위가 나타남을 확인할 수 있었다. 셋째는 inlet/outlet파이프의 손상으로 인한 누출로 10달과 타분 두 경우에 대해 분석하였으나, 각각의 경우 LFL의 반경은 큰 차이를 보이지 않았다. 따라서, 이와 같은 LNG누출 사고의 경우 초기 방출량의 크기가 확산의 주요 인자임을 알 수 있었다. 넷째는 방류둑에서 LNG배관이 파손될 경우 LFL의 크기를 산출하였다. 한편 복사열 및 불꽃의 크기에 대한 피해결과 분석을 동시에 수행하였다.

• 수산해양기술연구
• /
• 제53권4호
• /
• pp.430-436
• /
• 2017

The most frequent occurring and the serious marine casualties in fishing vessels are the collision in statistics from Korea Maritime Safety Tribunal (2008-2015). Collisions are is given a great deal of weight in all marine casualties, and the main cause of collisions is the negligence of watching. From this point of view, this study deals with the collision and its immediate cause, the negligence of watching which are main factors on the indirect causes. Basic analyzing data was gathered from the questionnaire made by experts of sea service part, and analyzed by using the fault tree analysis (FTA). From the result of the study, the occurrent probability of the negligence of watching in the collision due to the indirect causes occupied 64.9%, and its probability caused by the man factors was less than the other factors; i.e. the media factors and the management factors. For the reduction of the negligence of watching in the collision from this study, it needs an effort to remove not only the man factors, but also the media factors and management factors.

• 품질경영학회지
• /
• 제46권1호
• /
• pp.169-188
• /
• 2018

Purpose: The purpose of this study is to analyze low-temperature starting performance of the light attacker and to search and improve the aircraft system including battery and Battery Charge and Control Unit(BCCU). Methods: In order to improve the starting up performance of the light attacker at low-temp, various deficiency cause were derived and analyzed using Fault Tree Analysis method. As a result, it was confirmed there were drawbacks in the charging and discharging mechanism of the battery. The inactivation of the battery's electrolyte at low-temp and the premature termination of the battery charge were the main cause. After long error and trial, we improved these problems by improving performance of battery and optimizing the charging algorithm of BCCU. Results: It was confirmed that the problems of starting up failures were solved through the combined performance test of the battery and BCCU, the ground test using the aircraft system and the operation test conducted by Korea Airforce operating unit for 3 months in winter. Conclusion: This study showed that the improvement of quality reliability was achieved and thus the start-up performance issue of the light attacker has been resolved at low temperature. And it is expected that the design methodologies of temperature-affected electrical system of aircraft will contribute to the development of the aircraft industry in the future.

• 산업경영시스템학회지
• /
• 제38권3호
• /
• pp.21-28
• /
• 2015

As film products are increasingly used in a wide range of areas, from producing traditional flexible packaging to high-tech electronic products, a higher level of quality is demanded. Most film products are made in the form of rolled finished goods, therefore, various quality issues related to their shape characteristics must be addressed. The thickness of the film products is one of the most common and important critical-to-quality attributes (CTQs). Particularly, the degree of thickness uniformity is more important than other thickness parameters, because it will be potential causes of many secondary thickness-related quality problems, such as wrinkles or faulty windings. To control the degree of thickness uniformity, the fixed bending region is oneof the most important CTQs to manage. Fixed bending regions are special points in the transverse direction of a rolled product with consistent minute variations of the thickness gap. This paper describes the measurement and analysis of thickness uniformity data, which were performed in a real manufacturing field of biaxial oriented polypropylene (BOPP) film. In previous researches, quality function deployment (QFD) or fault tree analysis were used to find the most critical process attributes out to controlthe CTQ of thickness uniformity. Whereas, this paper uses traditional control charts to find the most critical process attributes out in this problem. In addition, the selection of one of the major critical process attributes (CTPs) that is expected to affect the CTQ of thickness uniformity is also described. The selected critical-to-process attributes are the controlled temperatures along the transverse direction. A dramatic improvement in thickness uniformity was observed when the selected CTPs were controlled.

• 한국안전학회지
• /
• 제36권4호
• /
• pp.12-19
• /
• 2021

This paper presents a safety assessment method for FTA-based induction heating systems; the failures and causes of electrical fire are first analyzed for each part and module qualitatively, and methods to manage high probabilities of failure and electrical fire are considered, thereby improving the reliability of the induction heating system. The cumulative importance value (ACC) of the minimal cut set is drawn by setting failure as the top event, and STACK and SMPS are observed to account for about 70% of the induction heating system failures. Thus, intensively managing the basic events contained in the minimal cut set of failures for STACK and SMPS is expected to provide effective and stable operation of the induction heating system. When electrical fire is set as the top event, the STACK percentage is 90%. Accordingly, the current IGBT is changed to a FET to increase the applied voltage and prevent induction heating system failure, and a heat sink plane is installed to prevent FET heating caused by switching, thereby preventing an electrical fire. By classifying the parts and modules of the induction heating system in detail and by applying FTA based on actual failure rates and relevant data, more practical and reasonable results may be expected. Hence, continuous research must be conducted to ensure safety when using induction heating systems.

• 한국산학기술학회논문지
• /
• 제17권2호
• /
• pp.1-7
• /
• 2016

차축 감속기와 차륜으로 구성된 고속철도차량 2차 구동장치는 일체형 조립체이지만, 상이한 기술사양으로 인하여 이들의 예방정비 주기는 서로 다르다. 특히, 이들은 완전분해 정비주기에 따라 매번 동시에 탈부착 작업을 수행한다. 따라서 불필요한 완전분해 정비를 감소하고 높은 열차 가용도를 유지하기 위해서는 신뢰성 중심 유지보수 관점에서 예방정비 비용의 최적화가 중요하다. 본 연구에서는 실제 정비이력으로부터 두 구성품들에 대한 결함나무 분석을 수행하고, 각 하부부품들의 치명도를 고려한 수정된 신뢰도를 각각 평가하였다. 두 구성품에 대한 예방 정비비용의 최적화는 기준 신뢰도 및 개선율을 고려한 유전자 알고리즘으로부터 구하였다. 비용의 최적화는 개체의 적합도 함수에 대한 최대값으로부터 얻는다. 유전자 알고리즘에 의한 최적의 완전분해 정비주기는 285만km로서, 기존 방법의 총비용과 비교하여 약 21% 감소하였다.