• New & Renewable Energy
• /
• v.3 no.4
• /
• pp.114-122
• /
• 2007

This paper addresses the measurement of structural loads on the Unison U50 wind turbine. The load measurement are carried out to determine the actual loads acting on a wind turbine. This is needed not only the certification process but also improving the technical development for prototype wind turbine. The measurement system is consists of measuring load, operating quantities and meteorological signal. All data that occur during the operating of a WT are stored the data acquisition system automatically. With using the measured data, load spectrum and equivalent load are evaluated according to IEC61400-13 "Measurement of mechanical loads".

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.341-344
• /
• 2007

This paper addresses the measurement of structural loads on the Unison U50 wind turbine. The load measurement are carried out to determine the actual loads acting on a wind turbine. This is needed not only the certification process but also improving the technical development for prototype wind turbine. The measurement system is consists of measuring load, operating quantities and meteorological signal. All data that occur during the operating of a WT are stored the data acquisition system automatically. With using the measured data, load spectrum and equivalent load are evaluated according to IEC61400-13 "Measurement of mechanical loads".

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.05a
• /
• pp.53-59
• /
• 1996

The new trends in main spindle design of Machining Center are focused on high-speed, high-precision and high-stiffness. As a main spindle bearing, the angular-contact ball bearing is well used. A rolling bearing is usually only a small part of a larger mechanical system, but its performance can have a great influence on the functioning of the whole machine. This work is about fatigue life tester design and monitoring of defected rolling-element bearings. The major work is done via experiments and the vibration signal is analysised by means of frequency spectrum technique. By analyzing the frequency spectrum, it is possible to view the condition of the bearings.

• Structural Monitoring and Maintenance
• /
• v.1 no.3
• /
• pp.309-322
• /
• 2014

Detection of fatigue cracks at an early stage of their development is important in structural health monitoring. The breathing of cracks in a structure generates higher harmonic components of the exciting frequency in the frequency spectrum. Previously, the residual operational deflection shape (R-ODS) method was successfully applied to beams with a single crack. The method is based on the ODSs at the exciting frequency and its higher harmonic components which consider both amplitude and phase information of responses to map the deflection pattern of structures. Although the R-ODS method shows the location of a single crack clearly, its identification for the location of multiple cracks in a structure is not always obvious. Therefore, an improvement to the R-ODS method is presented here to make the identification process distinct for the beams with multiple cracks. Numerical and experimental examples are utilised to investigate the effectiveness of the improved method.

• Journal of Korean Physical Therapy Science
• /
• v.10 no.1
• /
• pp.83-89
• /
• 2003

An electromyogram (EMG) using surface electrodes is one of the indirect tests most frequently used to ascertain muscle fatigue. An EMG can be used in two ways. The first technique determines the root mean square (RMS), which reflects the amplitude of the EMG signal. The second technique determines the median and mean power frequencies through EMG power spectrum analysis. The purpose of this article is for determine the correlation between work and percent root mean square(%RMS) and between work and MDF of EMG based on muscle contractions. It is used the %RMS, which reflects the amplitude of the EMG signal For MDF, it is used the frequency power spectrum analysis method, which involves the fast Fourier transformation (FFT) of the original Signals.

• Science of Emotion and Sensibility
• /
• v.3 no.1
• /
• pp.1-6
• /
• 2000

단조 작업에 의한 정신적 피로도의 평가를 위하여 피험자에게 1자릿수 숫자 3개를 더하는 연산 작업을 수행하게 하였다. 주관적 평가를 통해 단조작업임이 확인된 task를 사용하여 작업 시간이 증가함에 따라 단조감이 증가하도록 실험과정을 설계하고 생리신호를 측정하였다. 측정된 생리신호 중 심전도, 피부온도, 호흡을 분석하였다. 단조 작업을 수행함에 따라 피부온도의 증가 경향이 나타났으며, 심박 변화율의 전력스펙트럽 분석결과 고주파성분의 감소와 Power spectrum balance가 증가하였다. 특히 power spectrum balance와 주관적 평가치의 상관관계가 높게 나타났다. 또한 상관관계가 높은 생리신호를 사용하여 정신피로를 예측한 결과 (R=0.945)가 정신피로를 잘 나타낼 수 있음을 알 수 있었다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1999.11a
• /
• pp.222-226
• /
• 1999

단조 작업에 의한 정신적 부하의 평가를 위하여 피험자에게 3자릿수 숫자 3개를 더하는 연산 작업을 수행하게 하였다. 작업 시간이 증가함에 따라 단조감이 증가하도록 실험과정을 설계하였고 수행한 작업이 단조 작업임을 주관적 설문지를 사용하여 증명하였다. 작업 수행시 발생된 부하를 평가하기 위하여 생리신호를 측정하였다. 측정된 생리신호 중 Electrocardiogram, skin-temperature, temperature, respiration을 먼저 분석하였다. 단조 작업을 수행함에 따라 skin-temperature의 증가 경향이 나타났으며, heart rate variability의 power spectrum의 HF성분의 감소와 LF/HF비의 증가 경향이 나타났다. 특히 skin-temperature와 heart rate variability의 power spectrum의 HF성분은 주관적 평가치와 상관관계도 비교적 높게 나타났다.

• The Journal of Korean Physical Therapy
• /
• v.16 no.3
• /
• pp.176-191
• /
• 2004

The purpose of this study was to find the effects of the eccentric exercise induced delayed muscle soreness on proprioception, muscle strength, muscle fatigue, and muscle pain of the elbow flexor muscles. Thirty one healthy male subjects were participated in this study. Before resisted eccentric exercise of the elbow flexors and immediately and at 1, 3, 5, and 7 days post-exercise, pain threshold, proprioception, tension tracking, initial median frequency, and fatigue index were measured. Pain pressure threshold and visual analog scale (VAS) was used to measure muscle pain. Proprioception of the elbow joint was measured by using 3 dimension motion analysis system. Maximum isometric contraction was measured by using digital tensiometer. Electromyography and power spectrum analysis was used to measure initial median frequency (IMF) and fatigue index (FI). Immediately post-exercise, a significant decrease pain threshold was observed that continued to 5 days post-exercise. VAS score was significantly increased at 1 and 3 days post-exercise compared to that of immediately post-exercise. Maximum isometric contraction, IMF, tension tracking ability of the exercised elbow joint were significantly decreased at 1, 3, and 5 days post-exercise compared to that of pre-exercise. FI was significantly increased at 1 and 3 days post-exercise compared that of pre-exercise. Proprioception sense of exercised elbow joint was significantly decreased immediately and at 1, 3, and 5 days post-exercise compared to that of pre-exercise. Proprioception sense of the contralateral elbow joint was significantly decreased immediately post-exercise compared to that of pre-exercise. However, proprioception sense that was measured in close chain kinematic position was not significantly difference between pre-exercise and post-exercise. These results could be useful to determine the resume time for exercising and participating sports activities.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.576-581
• /
• 2007

The purpose of this study is to investigate changes in the forearm-muscle fatigue of a train driver operating the MasCon by using EMG (electromyogram) measurement technique. Train drivers usually use their forearm 4hours/day for normal operation. Accordingly, few different EMG signals of deltoid, biceps brachii, brachioradialis, flexor carpi ulnaris muscle of upper extremity have been measured and analyzed. The raw EMG Signals have been converted into median frequency using spectrum analysis. As the result, 80% of 10 subjects (real train drivers) showed that median frequency value of all four muscles has been reduced after 30 minutes of train operation. This results demonstrated that operating MasCon for 30 minutes could induce muscle fatigue.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.693-697
• /
• 2005

This study was performed to develop accelerated life test method of the wind-turbine gearbox using accumulated damage theory that used to model the fatigue of parts that receive variable load. The accumulated damage theory was introduced, and the estimation of life and calculation of accelerated life test time was illustrated. As the actual application example, accelerated life test method of the gearbox was described. Life distribution of the wind-turbine gearbox was supposed to follow Weibull distribution and life test time was calculated under the conditions of average life (MTBF) 140,600 hours and 99% reliability for one test sample According to the accumulated damage theory, because test time can shorten in case increase test load, test time could be reduced by 1.2 years when we put the load 1.2 times of rated load than 0.93 times of rated load that is equivalent load calculated by load spectrum of the wind turbine. This time, acceleration coefficient was 21.3. This accelerated test method was used to develop accelerated test method of gear reducer, gear and bearing as well as the industrial gearbox and it is considered to be applied comprehensively to mechanical parts the fatigue of which is happened by load or pressure etc.