• 대한인간공학회지
• /
• 제33권3호
• /
• pp.191-202
• /
• 2014

Objective: This study is conducted on the differences between flat and curved displays with respect to location of focused points, posture and satisfaction as well as preferred tilt angles. Background: In order to avoid physical and eye fatigue caused by misplayed sitting posture, many studies have asserted that the display requires appropriate location, size and tilt angle as well as curvature. However, most studies have focused on the work environment and the results are varied in the extent. Method: Eye height data in sitting posture were collected from 30 participants. Participants selected the most comfortable viewing angle within the range from $0^{\circ}$ to $12^{\circ}$ while watching videos for both curved and flat display. Then, physical and eye fatigue and overall satisfaction were subjectively evaluated. Lateral diagram describing viewing display condition was set and used to develop linear models for expecting the preferred tilt angle. Results: Due to sitting in the natural viewing posture rather than upright, the eye height is lowered to about 4.6 centimeters, on average, for both displays showing no significant differences. In contrast, preferred angles for the two displays are significantly different and this can be interpreted that curvature vary the points focused. Two linear models as functions of sitting eye height are developed to expect preferred tilt angle for each display. Based on the result of overall satisfaction evaluation, curved display is statistically better than flat display. Conclusion: The results show that flat and curved displays are significantly different expect for the viewing posture. However, reasons for preferring curved display are not accurately factorized and the linear models are limited in the experiment condition such as size of display, distance between display and viewer and other physical environmental factors. Further studies on curved displays under more various conditions are required. Application: This study can contribute to use of the curved display in various way.

• 한국정밀공학회지
• /
• 제27권4호
• /
• pp.72-78
• /
• 2010

Textile machinery affects various industry, such as sport leisure industry, metal and chemistry material, electric electron, mechanical energy, packing and printing industry. In case of design of textile machine, the very important fact is absorbing the minute vibration induced by spinning thread and insert which is the part of spindle plays a role of reduction of impact caused by oscillation of thread bobbin. Therefore, Optimal design was executed by design of experiments and kriging optimal design methods to prevent fracture of spindle insert under the fatigue condition and deduced the best value of design parameter to improve the stability of the products. The highest sensitivity is showed at the design parameter A and D. As the spiral number of insert is increase, tension force applied its edge is distributed at whole model and the stress concentration is reduced.

• 동력기계공학회지
• /
• 제12권4호
• /
• pp.57-63
• /
• 2008

The last stage blade of the low pressure steam turbine remarkably affects turbine plant performance and availability Turbine manufacturers are continuously developing the low pressure last stage blades using the latest technology in order to achieve higher reliability and improved efficiency. They tend to lengthen the last stage blade and apply shrouds at the blades to enhance turbine efficiency. The long blades increase the blade tip circumferential speed and water droplet erosion at shroud is anticipated. Parts of integral shrouds of the last stage 40 inch blades were cracked and liberated recently in a combined cycle power plant. In order to analyze the root cause of the last stage blades shroud cracks, we investigated operational history, heat balance diagram, damaged blades shape, fractured surface of damaged blades, microstructure examination and design data, etc. Root causes were analyzed as the improper material and design of the blade. Notches induced by erosion and blade shroud were failed eventually by high cycle fatigue. This paper describes the root cause analysis and countermeasures for the steam turbine last stage blade shroud cracks of the combined cycle power plant.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.333-343
• /
• 1999

When a high speed train enters a tunnel, wind speed passing through the train in a tunnel section becomes higher due to the reverse flow to the direction of the train. The higher wind speed gives more aerodynamic forces to the pantograph on the train. Therefore, it is necessary to perform aerodynamic and dynamic analyses in order to check whether the current collection of the high speed train, entering the tunnel, still remain permissible or not. In this paper, the aerodynamic analysis has been performed under the assumption that a high speed train at 300 km/h enters a tunnel whose cross sectional area Is 107/㎡ and length is 1000m. In consideration of the aerodynamic analysis results, the dynamic analysis has been performed based on the catenary and pantograph dynamic models in SEOUL-PUSAN high speed rail, using the GASENDO developed by RTRI. In addition, the fatigue life of the contact wire has been reviewed using the Goodman diagram. Based on the analysis results, it is concluded that the increase of the aerodynamic forces on the pantograph in the tunnel section shall not affect characteristics of current collection adversely except that motions of the pantograph may be constrained by bump-stops.

• 한국해양공학회지
• /
• 제37권4호
• /
• pp.164-171
• /
• 2023

Vibration and noise must be considered to maximize the efficiency of a yaw system and reduce the fatigue load acting on a wind turbine. This study investigated a method for analyzing yaw-system vibration based on the change in the load-duration distribution (LDD). A substructure synthesis method was combined with a planetary gear train rotational vibration model and finite element models of the housing and carriers. For the vibration excitation sources, the mass imbalance, gear mesh frequency, and bearing defect frequency were considered, and a critical speed analysis was performed. The analysis results showed that the critical speed did not occur within the operating speed range, but a defect occurred in the bearing of the first-stage planetary gear system. It was found that the bearing stiffness and first natural frequency increased with the LDD load. In addition, no vibration occurred in the operating speed range under any of the LDD loads. Because the rolling bearing stiffness changed with the LDD, it was necessary to consider the LDD when analyzing the wind turbine vibration.

• 한국산학기술학회논문지
• /
• 제21권7호
• /
• pp.162-167
• /
• 2020

본 연구에서는 국내 고정익항공기 개발의 일환으로 고정익항공기용 외부 연료탱크와 파일런에 대한 피로해석을 수행하였다. 구조해석을 통해 외부 연료탱크와 파일런의 피로해석 부위들을 선정하고, 선정된 부위들에서 단위하중에 대한 전달함수를 구축하였다. 연속 하중 프로파일에 대해서 각 프로파일 하중과 전달함수와의 내적을 통해 선정 부위에서의 응력 성분을 계산한 후, Von Mises 등가응력을 사용하여 각 프로파일의 대표응력(Representative Stress)을 계산하였다. 그리고, 구축된 대표 응력 그룹에 Rainflow Counting 기법을 사용하여 초기의 방대한 하중 프로파일로 부터 축소된 개별 프로파일과 그에 대한 진폭 및 평균값을 추출한 후, MMPDS(Metallic Materials Properties Development and Standardization)의 S-N 선도를 적용하여 수명싸이클을 계산하였다. 만약, 추출된 개별 프로파일들의 Stress Ratio가 선정된 S-N 선도의 Stress Ratio 범위를 벗어나는 경우 Modified Goodman 선도로부터 유도된 식을 사용하여 Stress Ratio가 해당 S-N 선도에서 요구하는 범위를 만족하도록 변환하는 과정을 거쳤다. 그리고, Miner's Rule에 의해 계산된 각 프로파일들의 손상값들을 더하여 선정 부위에서의 수명을 평가하였다. 최종적으로 수명평가를 위해 선정된 외부연료탱크와 파일런의 관심 부위에서 요구 수명을 모두 만족하는 것으로 평가되었다.

• 대한간호학회지
• /
• 제49권5호
• /
• pp.631-642
• /
• 2019

Purpose: This study aimed to predict the influencing factors and the consequences of near miss in nurses' medication error based upon Salazar & Primomo's ecological system theory. Methods: A convenience sample of 198 nurses was recruited for the cross-sectional survey design. Data were collected from July to September 2016. Using the collected data, the developed model was verified by structural equation modeling analysis using SPSS and AMOS program. Results: For the fitness of the hypothetical model, the results showed that $x^2$ ($x^2=258.50$, p<.001) was not fit, but standardized $x^2$ ($x^2/df=2.35$) was a good fit for this model. Additionally, absolute fit index RMR=.06, RMSEA=.08, GFI=.86, AGFI=.81 reached the recommended level, but the Incremental fit index TLI=.82, CFI=.85 was not enough to reach to the recommended level. With the path diagram of the hypothetical model, caution (${\beta}=-.29$ p<.001), patient safety culture (${\beta}=-.20$, p=.041), and work load (${\beta}=.18$, p=.037) had a significant effect on the near miss experiences in nurses' medication error, while fatigue (${\beta}=-.06$, p=.575) did not affect it. Moreover, the near miss experience had a significant effect on work productivity (${\beta}=-.25$, p=.001). Conclusion: These results have shown that to decrease the near miss experience by nurses and increase their work productivity in hospital environments would require both personal and organizational effort.