• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.415-420
• /
• 2009

This paper reports the results of a case study for the evaluation of surface damage by using acoustic nonlinearity of surface wave. In this study, the experimental system was constructed to measure the acoustic nonlinear parameter of surface wave in an Aluminum 6061 T6 specimen of which surface was damaged by the three point bending fatigue test, and magnitudes of nonlinear parameter measured before and after the fatigue test were compared. Especially, since the surface fatigue damage by the three point bending is concentrated at the central position of loading, the change in the nonlinear parameter around this position was monitored. Experimental results showed that the measured nonlinear parameter at the outside of this position after the fatigue test was almost same as the initial value before the fatigue test, since the fatigue damage at this position was little. However, clear increase in the nonlinear parameter was noticed after the fatigue test at the central position of specimen where the surface fatigue damage is expected to be concentrated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2357-2364
• /
• 2017

Recently, smart wearable devices for monitoring health status have been utilized as interest in health care has increased. In this paper, we developed a fatigue measurement system that works with smart wearable devices. Unlike physical fatigue that is restored when you take enough rest, mental fatigue can decrease the efficiency or concentration of work, so you can monitor your mental health status through measurements. This system provides the function to transmit the measured data from the smart wearable device to the smartphone and to calculate the mental fatigue. A fatigue index was developed to measure fatigue and expressed as a number from 1 to 5. In addition, the results of the fatigue calculation and the survey were compared with the results of the independent sample t-test. Therefore, this system will be used to help users manage their health efficiently.

• Journal of the Korean Institute of Gas
• /
• v.16 no.3
• /
• pp.29-34
• /
• 2012

Investigating safer ways to design and use to prevent a loss of life and property by failure of the structures are necessary and assessing total fatigue life with initiation and propagation of fatigue crack accurately through fatigue analysis is very important. The object of this study is to examine the initial life and propagation life when the fatigue crack is introduced from the root which is likely to appear in LOP(Lack of Penetration) cruciform fillet welded structure including bridges, ships and gas storage facilities which are impossible to be fully penetrated and to measure the rate of fatigue life until the final cleavage failure. As the result, each rate of fatigue life for fatigue failure is somewhat different in the range of 5% according to the thickness of material, however, the overall rate of initial life is in the range of 34~39% and propagation life showed the range of 61~66%.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.7
• /
• pp.646-652
• /
• 2009

In this paper, welding pitch optimization technique of vehicle subframe is presented considering the fatigue life of spot welding nuggets. Fatigue life of spot welding nuggets is estimated by using the frequency-domain fatigue analysis technique. The input data, which are used in the fatigue analysis, are obtained by performing the dynamic analysis of vehicle model passing through the Belgian road profile and also the modal frequency response analysis of finite element model of vehicle subframe. According to the fatigue life result obtained from the frequency-domain fatigue analysis, the design points to optimize the weld pitch distance are determined. For obtaining the welding pitch combination to maximize the fatigue life of the spot welding nuggets, 4-factor, 3-level orthogonal array experimental design is used. This study shows that the optimized subframe improves the fatigue life of welding nugget with minimum fatigue life about 65.8 % as compared with the baseline design.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.11
• /
• pp.69-76
• /
• 1997

The rotating bending fatigue tests were performed using the specimens taken from Cr-Mo-V steel, widely sued in thermal power plant turbines, at various temperatures such as room temperature, 300 .deg. C, 425 .deg. C and 550 .deg. C. The characteristics of fatigue crack propagation were examined and analyzed by using fracture mechanics parameter. The plastic replica method was also applied in order to measure the crack length on the basis of serial observation of fatigue crack propagation behavior on the defected specimen surface. The fatigue crack propagation behavior of Cr-Mo-V steel was investigated within the frame work of elastic-plastic fracture mechanics. The propagation law of fatigue crack is obtained uniquely by using the term .sigma. $^{n}$ sub a/where .sigma. $_{a}$ is the service stress, a is the crack length and n is a constant. The values of constant n are nearly equal to 2.48, 2.60 and 8.61 at room temperature, 300 .deg. C and 425 .deg. C.

• Journal of Broadcast Engineering
• /
• v.15 no.5
• /
• pp.607-616
• /
• 2010

The methods developed to measure visual fatigue so far are quite few and lack of validity, and more importantly, they do not figure out the complex properties of the visual fatigue. The purpose of the research was to analyze the factors comprising the visual fatigue and to develop the method to measure it validly. The results are summarized as follows. First, we found that the 3D visual fatigue was comprised of four independent factors (visual stress, eye pain, body pain and image blurring factors). Second, we developed 29 items that measure four factors of 3D visual fatigue. Finally, the watching duration and binocular disparities affected the visual fatigue as had been expected. These results imply that the developed method does measure the three dimensional fatigue validly.

• Science of Emotion and Sensibility
• /
• v.5 no.1
• /
• pp.71-78
• /
• 2002

Driving involves a series of complicated precesses requiring various human capacities, such as perception, will decision, and athletic functions. Consequently, it induces a high degree of continuous concentration of mind and tension from external stimulation, bringing fatigue to the driver, and driver fatigue is counted as one of the major causes of traffic accidents. Nevertheless, because of the complicated urban lives, traffic congestion, job characteristics, and so on, the drivers have to spend a longer time inside a vehicle, and the fatigue and stress thereof is almost unavoidable. We haute, therefore, turned our attention to the reduction in the fatigue during driving by supplying oxygen, and investigated in this research the drivers subjective fatigue evaluations and reaction time when oxygen is supplied in different rates. As a result, we have found that the subjective fatigue feeling is highest at low-rate O/Sub 2/ supply (18%), and fatigue feeling was comparatively reduced at high-rate O/Sub 2/ (30%). The sleepiness also showed the tendency to be reduced at high-rate O/Sub 2/ supply in the case of driving for 1 hour or more. The time for reaction to braking after the sign for urgent stop is given tends to show more substantial reduction at high-rate O/Sub 2/ supply than at low-rate O/Sub 2/ supply after 2 hours driving. It can, therefore, be deduced from the aforesaid results that the subjective responses and behavioral reactions tend to show reduced fatigue at the condition of high-rate O/Sub 2/ supply. Hence, it was suggested that drivers felt subjective fatigue while driving at low-rate O/Sub 2/ and the subjective fatigue and reaction time were reduced at high-rate O/Sub 2/. These findings suggest that the oxygen supply will reduce driver fatigue.

• Journal of the Korean Institute of Gas
• /
• v.16 no.4
• /
• pp.16-22
• /
• 2012

The use of welding process has been increased for manufacture of machine, bridges, ships, gas facilities and so on together with development of welding technique. Accordingly, it has been needed to develop the welding methods considering higher productivity and safety design for manufacture of their welding structures. In this study, it was studied basically on characteristics of fatigue strength and fatigue life in full penetrated cruciform fillet weld zone in relation to material thickness, welding passes, loading direction and notch radius of toe zone. Most of fatigue failure occurred in toe zone of cruciform fillet weld joint. Fatigue strength and fatigue life are under the influence of stress concentration due to notch radius and flank angle of toe zone. The metal of toe zone annealed and diffused by multi-layer welding and acicular ferrite structure formed by the result improved fatigue strength and fatigue life.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.635-643
• /
• 2017

The purpose of this study is to investigate the influence of the cold reduction rate and an ultrasonic fatigue test (UFT) on the fatigue behaviors of STS 304L. The tensile strength, yield strength, hardness value and fatigue limit in the UFT fatigue test linearly increased as thickness decreased from 1.5 mm to 1.1 mm, as the cold reduction rate of STS 304L increased. As a result of the UFT fatigue test (R = -1) of four specimens, the fatigue limit of the S-N curve formed a knee point in the region of $10^6$, and the 2nd fatigue limit caused by giga cycle fatigue did not appeared. In the case of t = 1.1 mm, the highest fatigue limit was 345 MPa, which was 64.3% higher than the original material (t = 1.5 mm). As a result of the UFT fatigue test of STS 304L, many small surface cracks occurred, grown, coalesced while tearing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.46-49
• /
• 2004

The spider of a drum washing machine receives the repeated fatigue loadings during laundering. Although the spider is designed statically safely, it often happens fatigue failure. Therefore it requires the safe design for fatigue and needs the prediction of quantitative fatigue life. The S-N diagram for a spider material is developed by fatigue test and statistical analysis. The stresses are measured directly from strain gages on the spider. To predict the fatigue life of spider, the rainflow counting method and Miner's rule are used. The data for fatigue life are analyzed statistically. From these data, reliability estimation for fatigue life can be done and also, equivalent fatigue life can be obtained. It will be applied to make and improve to a short period for design and prototype test.