• 한국안전학회지
• /
• 제38권1호
• /
• pp.42-54
• /
• 2023

Mobile scaffold is used as a work platform in construction sites. According to industrial accident data, 10 fatalities occur annually on average due to falling from mobile scaffold in construction sites. To prevent such fatal accidents, safety standards must be improved by analyzing the causes of fatal accidents related to mobile scaffold. Accordingly, we analyzed domestic and international safety standards for mobile scaffold and analyzed the fatalities (117 persons) caused by mobile scaffold accidents in domestic construction sites during 2011-2020 and found that fall, overturn, and collapse accounted for 88% (103 persons), 10.3% (12 persons), and 1.7% (2 persons) of fatalities, respectively. The main causes of fatal accidents were found to be non-installation or insufficient installation of safety rails and outriggers and incorrect sequence of work. Based on the analysis results, we proposed strategies for improving the safety standards, such as the use of advanced guard rails and wheel-attached outriggers, to enhance the safety and field applicability of the mobile scaffold. Technology development and improvements in the safety standards for the use of mobile scaffold will aid in the prevention of fatal accidents caused by mobile scaffold.

• Safety and Health at Work
• /
• 제2권1호
• /
• pp.52-56
• /
• 2011

Objectives: The occupational accident rate was officially reported to be 0.77 per 100 workers in 2001 and 0.70 in 2009. The stagnant decrease in accident rate raises a question about the effectiveness of prevention activity because there have been active prevention efforts in the past 10 years. It is also necessary to know the exact status of occupational injuries to direct a prevention strategy. Methods: The author re-analyzed occupational injury statistics to find the reason for stagnant decreases in occupational injuries. Compensated occupational injuries cases were used to calculate fatal and non-fatal injury rates. Injuries from commuting accidents and sports activities were excluded as well as occupational diseases. The number of workers was adjusted to that of full time equivalent employees. Results: The fatal injury rate excluding injuries associated with commuting accidents, sports activities, and occupational diseases decreased from 12.59 in 2001 to 8.20 in 2009. In 2007, 67.5% of accidents that involved being caught in objects, which are mostly caused by machines and equipment, occurred in the manufacturing industry; this type of incident has decreased since 2001. The fatal and non-fatal injury rates in the manufacturing industry have continuously decreased while the rates in the service industry have not changed from 2001 to 2009. Non-fatal injuries might not be reported in many cases. The number of insured workers was underestimated as long working hours were not adjusted for in the reporting system. Conclusion: The occupational fatal injury rate has decreased and the non-fatal injury rate might have decreased during the last 10 years, although the statistics show stagnancy. The decrease of the injury rate was countervailed by various factors. Hence, the current accident rate does not reflect the actual situation of accidents in Korea. Korea needs to develop an improved system to more accurately calculate occupational fatal and non-fatal injury rates.

• 한국안전학회지
• /
• 제21권4호
• /
• pp.102-107
• /
• 2006

Construction accidents have not decreased in spite of much effort such as new work methods, education and research related to safety works. Specially, many fatal accidents happened in construction works which involve the apartment, building, school, church, hotel, hospital, bank work and the other works. These accidents are mainly caused by unanticipated risk factors. From these reasons, this study researched fatal accidents which happened in construction works during last 13 years($1992{\sim}2004$) and analyzed the input workers and a work period of construction work. According to the input workers and a work period, the results are as following. During 13years($1992{\sim}2004$), the fatal accidents, related to the construction work, were happened to the 1,977 cases. These results were occupied the 21.32% of the total industry accidents. According to the result of the construction, the fatal accident rate of a concrete form work was the highest rate of 16.24% (321 cases) and a temporary work, a steel frame work was the each rate of 12.39%(245 cases), 10.07%(199 cases). Comparing to other work types, the fatal accident rate of those three work types(concrete form work, temporary work, steel work) was represented highly. We surveyed input workers and work period of construction work site. From the result of survey, input workers of a concrete form work were occupied with 13,720. The risk rate of the work type, which was considered input workers and work period, was represented 0.3622(a steel frame work), 0.1142(a temporary work), 0.0782(a tower crane) and 0.0772(a concrete work).

• 한국안전학회지
• /
• 제34권3호
• /
• pp.83-88
• /
• 2019

The 7,993 cases of Survey Report of Fatal Industrial Accidents conducted jointly by the MEOL and the KOSHA for the recent seven years(2007-2013) were categorized according to personal and occupational characteristics, industry types, business sizes, job types, activities at the time accident, types of accidents, material agents(assailing materials), unsafe conditions, and unsafe acts. And it is found that among the 72.2 percent of fatal occupational accidents in the construction and manufacturing industries are caused by falling, sticking, bumping and being caught under objects & overturning. For this study, through the empirical analysis on causes of fatal industrial accidents, was used to identity high risk groups based on total data of 7,993 victims of occupational accidents. An annual fatal occupational injury (FOI) rate per 10,000 workers was about 0.47‱. The middle-aged group and the elderly group showed the highest FOI rates per 10,000 workers (0.73‱, 0.80‱), and the daily workers showed the highest FOI rate (1.46‱), and the craft and related trades workers showed the highest FOI rate (2.17‱). In case of industry type the mining industry (7.26‱) showed the highest FOI rate, followed by the sewerage, waste management, materials recovery and remediation activity industry (3.91‱) and the construction industry (2.71‱). The primary high risk target group that requires a strategy designed to reduce fatal occupation injuries caused by falling and bumping & contact(collision) is the construction industry, and the secondary high risk target group in the construction industry is classified as the equipment, machine operating and assembling workers in the construction industry, those aged 50 years old and above need the prevention measures against bumping & contact(collision) and being caught under an object & falling(objects), while those aged less than 50 years old need prevention measures against falling(persons).

• 한국안전학회지
• /
• 제20권1호
• /
• pp.119-125
• /
• 2005

Construction work accidents have not decreased in spite of much effect such as new work methods education and research related to the safety management. Specially, many fatal accidents were mainly caused by unanticipated risk factors in reinforced concrete construction work, which was involved in apartment, building. school church, hotel hospital, bank work and the other works. According to the construction fatal accident book by KOSHA 1,903 workers were killed by the fatal accidents in reinforced concrete construction work during the 13 years$(1992\~2004)$. From these reasons, this study researched the cause of fatal accidents which were happened in reinforced concrete construction work during last 13 years and surveyed construction managers and specialists about risk factors according to the work type in the reinforced concrete construction work. Therefore, this study will suggest the counterplan about the construction safety management and prevent fatal accidents from construction site related to the reinforced concrete construction work.

• 한국안전학회지
• /
• 제37권6호
• /
• pp.40-49
• /
• 2022

Simple statistical frequency based analysis, such as Pareto analysis, are widely used in conventional accident analysis. However, due to the dynamic and complex nature of construction works, many factors can simultaneously affect or involve the occurrence of accidents in construction projects. Therefore, the identification of the complex relationship between such factors is important to establish relevant and effective safety management policies and/or programs. In this study, characteristic factors and their relationships' contribution to non-fatal accidents in construction projects are analyzed using the association rule mining (ARM) technique. To this end, a total of 59,202 construction accident data are collected from 2015 to 2019 and the ARM is performed to retrieve specific relationships -named as association rules-among classified factors in the data. Characteristics of the retrieved relationships are analyzed and compared with the results of conventional Pareto analysis. Based on the results, it is found that both fall and trip are notable accident forms having characteristic relations with other factors for non-fatal accidents in construction projects. It is also found that small-scale construction, age of 50s, less than 1 month of working period, and architectural construction are important factors for non-fatal accidents in construction projects.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.279-285
• /
• 1998

This study investigated human error characteristics of the 42 fatal industrial accidents reported by staff members of Korea Industrial Safety Corporation. Various types of human error were judged to be primary contributing factors in about 74 percent of the cases. Most of human error made by involved industrial operators resulted from two types of mistakes: (1) mistake in judgement of work situation, and (2) omission in daily check. It was concluded that preparation/observance for work procedure manuals, danger predication training and enforcement/Education of daily check routine would be effective preventive tools for these types of human error attributable to fatal industrial accidents.

• 한국안전학회지
• /
• 제32권5호
• /
• pp.96-102
• /
• 2017

The highest fatal accident ratio was recorded in the construction industry. According to the industrial insurance premium rate & business type example, among the construction industry, the architectural work has the highest fatal and loss time accident ratio. Previous literature has investigated various aspects of accident occurrence and prevention in architectural work. However, those studied were limited in that they only focused on the fatal accident without considering the loss time accident. But non fatal accidents were recorded more than 50 times of fatal accidents. Therefore non fatal accidents must be controlled to lessen industrial accidents. Based on this, the goal of this study was to investigate the nature of the loss time accident and derive the risk index of work type in architectural work. In this study, opinions of safety experts were gathered and the risk index of work type was derived using AHP(Analytic Hierarchy Process). And verification was accomplished by comparing the results of this study with the risk index derived by analysis of accident records. Results showed that the risk index of work type was significantly higher in steel frame work, temporary installation work, earth & foundation work, facilities work, concrete work. And statistical analysis for verification showed that coefficient of Pearson correlation was 0.686 and P-value was 0.001.

• 산업경영시스템학회지
• /
• 제40권1호
• /
• pp.87-94
• /
• 2017

Many industrial accidents have occurred continuously in the manufacturing industries, construction industries, and service industries of Korea. Fatal accidents have occurred most frequently in the construction industries of Korea. Especially, the trend analysis of the accident rate and fatal accident rate is very important in order to prevent industrial accidents in the construction industries systematically. This paper considers forecasting of the accident rate and fatal accident rate with static and dynamic time series analysis methods in the construction industries. Therefore, this paper describes the optimal accident rate and fatal accident rate by minimization of the sum of square errors (SSE) among regression analysis method (RAM), exponential smoothing method (ESM), double exponential smoothing method (DESM), auto-regressive integrated moving average (ARIMA) model, proposed analytic function model (PAFM), and kalman filtering model (KFM) with existing accident data in construction industries. In this paper, microsoft foundation class (MFC) soft of Visual Studio 2008 was used to predict the accident rate and fatal accident rate. Zero Accident Program developed in this paper is defined as the predicted accident rate and fatal accident rate, the zero accident target time, and the zero accident time based on the achievement probability calculated rationally and practically. The minimum value for minimizing SSE in the construction industries was found in 0.1666 and 1.4579 in the accident rate and fatal accident rate, respectively. Accordingly, RAM and ARIMA model are ideally applied in the accident rate and fatal accident rate, respectively. Finally, the trend analysis of this paper provides decisive information in order to prevent industrial accidents in construction industries very systematically.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.122-133
• /
• 1997

Various types of fatal accidents are increasing in Korean construction work site. Simply repeated and conventional accidents as well as new types of potential hazards which are caused by large-scaled work, complexity and negligence of temporary structures in construction are increasing, so that analysis of fundamental causes are necessary to control the construction accidents. In this study 739 fatal accidents are informally classified by the types of work and work process. The classified items which are based on ANSI Z 16.2, are modified adapted to the construction fields and are given code numbers and are analyzed by the data-base program. The exact causes of various types of accidents are analyzed by the accident types, agencies and hazardous conditions and through the Cross-tabulation method in order to find out the cause between relevant accidents.