• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.3-12
• /
• 2016

Bluetooth Low Energy (BLE) protocol has attracted attention as a promising technology for low data throughput and low energy wireless sensor networks. Fast device discovery is very important in a BLE based wireless network. It is necessary to configure the network to work with minimized energy consumption because the BLE network nodes are expected to operate a long time typically on a coin cell battery. However, since it is difficult to obtain low energy and low latency at the same time, the BLE standard introduces wide range setting of parameters related to device discovery process and let the network operators to set up parameter values for the application. Therefore, it is necessary to analyze the performance of device discovery according to the related parameter values prior to BLE network operation. In this paper we analyze the expected value and the cumulative distribution function of the number of advertisements for device discovery in the BLE network. In addition, we propose a scheme for controlling the interval between advertising events that can improve the performance of device discovery without increasing energy consumption.

• Korean Institute of Interior Design Journal
• /
• v.25 no.1
• /
• pp.73-80
• /
• 2016

Street is the most fundamental component of city and place to promote diverse actions of people. Pedestrians gaze at various street environments. A visual gaze means that there are interesting elements and these elements need to be preferentially improved in the street environment improvement project. Therefore, this study aims to set up the priorities of street environment components by analyzing eye movements from a pedestrian perspective. In this study, street environment components were classified into road, street facility, building(facade) and sky and as street environment images, three "Streets of Youth" situated in Gwangbok-ro, Seomyeon and Busan University of Busan were selected. The experiment targeted 30 males and females in their twenties to forties. After setting the angle of sight through a calibration test, an eye-tracking experiment regarding the three images was conducted. Lastly, the subjects were asked to fill in questionnaires. The following three conclusions were obtained from the results of the eye-tracking experiment and the survey. First, building was the top priority of street environment components and it was followed by street facility, road and sky. Second, as components to be regarded as important, fast 'Sequence', many 'Fixation Counts' and 'Visit Counts', short 'Time to First Fixation' and long 'Fixation Duration' and 'Visit Duration' were preferred. Third, after voluntary eye movements, the subjects recognized the objects with the highest gaze frequency and the lowest gaze frequency.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.6
• /
• pp.653-658
• /
• 2013

This paper describes a new sensorless speed control method for permanent magnet synchronous motor(PMSM) using direct torque control(DTC). The direct torque control offers fast torque response, lesser hardware and processing costs as compared to vector controlled drives. In this paper the current error compensation technique is applied for sensorless speed control of synchronous motor. Through this method, the controlled stator voltage is applied to the synchronous motor so that the error between stator currents of the mathematical model and the actual motor can be forced to decay to zero as time proceeds and therefore, the motor speed approaches to the setting value. Especially, any PI controllers are not necessary in this control method. The simulation results indicate good speed and load responses from the low speed range to the high.

• Journal of Mechanical Science and Technology
• /
• v.17 no.10
• /
• pp.1423-1430
• /
• 2003

In this paper, we develop a real time monitoring system to detect third-party damage on natural gas pipeline. When the damage due to third-party incidents causes an immediate rupture, the developed on-line monitoring system can help reducing the sequences of event at once. Moreover, since many third-party incidents cause damage that does not lead to immediate rupture but can grow with time, the developed on-line monitoring system can execute a significant role in reducing many third-party damage incidents. Also, when the damage is given at a point on natural gas pipeline, the acoustic wave is propagated very fast about 421.3 m/s. Therefore, the data processing time should be very short in order to detect precisely the impact position. Generally, the pipeline is laid under ground or sea and the length is very long. So a wireless data communication method is recommendable and the sensing positions are limited by laid circumstance and setting cost of sensors. The calculation and monitoring software is developed by an algorithm using the propagation speed of acoustic wave and data base system based on wireless communication and DSP systems. The developed monitoring system is examined by field testing at Balan pilot plant, KOGAS being done in order to demonstrate its validity through reactive detection of third-party contact with pipelines. Furthermore, the development system was set at the practical pipelines such as an offshore pipeline between two islands Yul-Do and Youngjong-Do, and a land branch of Pyoungtaek, Korea and it has been operating in real time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2335-2340
• /
• 2009

This paper presents how to implement Markerless Augmented Reality and how to create and apply reference data sets. There are three parts related with implementation: setting camera, creation of reference data set, and tracking. To create effective reference data sets, we need a 3D model such as CAD model. It is also required to create reference data sets from various viewpoints. We extract the feature points from the mode1 image and then extract 3D positions corresponding to the feature points using ray tracking. These 2D/3D correspondence point sets constitute a reference data set of the model. Reference data sets are constructed for various viewpoints of the model. Fast tracking can be done using a reference data set the most frequently matched with feature points of the present frame and model data near the reference data set.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1611-1625
• /
• 2020

We propose a scaled-down experimental model of vertical air-natural convection channels by applying the modified Ishii-Kataoka scaling method with the assistance of numerical analyses to the Reactor Vault Cooling System (RVCS) of the Proto-type Gen-IV Sodium-cooled fast reactor (PGSFR) being developed in Korea. Two major non-dimensional numbers (modified Richardson and Friction number) from the momentum equation and Stanton number from the energy balance equation were identified to design the scaled-down experimental model to assimilate thermal-hydraulic behaviors of the natural convective air-cooling channel of RVCS. The ratios of the design parameters in the PGSFR RVCS between the prototype and the scaled-down model were determined by setting Richardson and Stanton number to be unity. The friction number which cannot be determined by the Ishii-Kataoka method was estimated by numerical analyses using the MARS-KS system code. The numerical analyses showed that the friction number with the form loss coefficient of 2.0 in the scale-down model would result in an acceptable prediction of the thermal-hydraulic behavior in RVCS. We also performed experimental benchmarking using the scaled-down model with the MARS-KS simulations to verify the appropriateness of the scale-down model, which demonstrated that the temperature rises and the average air flow velocity measured in the scale-down model.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.6
• /
• pp.1087-1101
• /
• 2013

Most people are connected to Social Network Services (SNS) through smart devices. Social Network Services are tools that transport information fast and easily. It does not care where he or she comes from. A lot of information circulates and is shared on Social Network Services. but Social Network Services faults are magnified and becoming a serious issue. For instance, malicious users generate multiple IDs easily on Facebook and he can use personal information of others on purpose, because most people tend to undoubtedly accept friend requests. In this paper, we have specified research scope to Facebook, which is one of most popular Social Network Services in the world. We propose a way of minimizing the number of malicious actions on Facebook from malignant users and malicious bots by setting criteria and applying reputation system.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.4
• /
• pp.445-450
• /
• 2016

Piezography, prosthetic space recorded by pronunciation, can be used as a reference for arrangement of artificial teeth and polishing surface of a denture. In this case, a 67 year old female patient was presented for new dentures. Old dentures had class II relationship and poor retention. For fabrication of stable dentures, using piezography and lingualized occlusion was planned. After taking impressions with conventional method, conventional denture bases with wax rim were fabricated. Then, additional mandibular denture base was fabricated for piezography. With fast setting silicon impression material, piezography was recorded by using six pronunciations, 'si', 'so', 'me', 'te', 'de', and 'mu'. According to the piezographic space, mandibular artificial teeth were arranged and modified for lingualized occlusion. As a result, the patient was satisfied with new dentures functionally and esthetically.

• Journal of the Korean Society of Costume
• /
• v.65 no.8
• /
• pp.1-21
• /
• 2015

The purpose of this study is to investigate the self-image of men and the characteristics of their fashion styles, as they are fast becoming an influential consumer group. Men in the thirties and forties who had a higher-than-average interest in fashion were surveyed online and the results from this study are as follows. In terms of variations of self-image connected to situations, we found that there were strong relationships between the preference of the "charming & romantic" image to private meet-ups with acquaintances, "intelligent & classy" to official events, "rational & realistic" to everyday work in an official setting, and "modest & ordinary" to complex situations including family occasions and customary events. Those who aimed for "urban refinement - sensitive" appeal also preferred a "charming & romantic" self-image, while pursuing a "classic & modern" fashion style for official settings and a "gentle & charming" style in private settings. Those who aimed for "stable elegance - intelligent" youth" image preferred the "intelligent & classy" image, while pursuing a "stable & intelligent" fashion style in official settings, and an "intelligent yet active & young" style in private settings. Those who aimed for "rational practicality - comfortable activity" image preferred a "rational & realistic" self-image, while pursuing a "rational & practical" fashion style in official settings, and a "comfortable & active" style in private settings. Those who aimed for "ordinary modesty - plain simplicity"preferred a modest and ordinary self-image, while pursuing an ordinary fashion style, and a simple style in private settings. The various situational assessments used in this study to analyze the fashion-related circumstances for male consumers can be utilized in upcoming studies, and can be an effective indicator of situational consumer preferences in terms of men's fashion marketing and product planning strategies.

• Geophysics and Geophysical Exploration
• /
• v.6 no.2
• /
• pp.95-100
• /
• 2003

In this study, we developed reflection tomography inversion algorithm using Straight Ray Technique (SRT) which can calculate travel time easily and fast for complex geological structure. The inversion process begins by setting the initial velocity model as a constant velocity model that hat only impedance boundaries. The inversion process searches a layer-interface structure model that is able to explain the given data satisfactorily by inverting to minimize data misfit. For getting optimal solution, we used Gauss-Newton method that needed constructing the approximate Hessian matrix. We also applied the Marquart-Levenberg regularization method to this inversion process to prevent solution diverging. The ability of the method to resolve typical target structures was tested in a synthetic salt dome inversion. Using the inverted velocity model, we obtained the migration image close to that of the true velocity model.