• 한국멀티미디어학회논문지
• /
• 제23권5호
• /
• pp.721-727
• /
• 2020

The change in 21st century imaging media technology is changing our modern visual system. Virtual reality HMD devices, one of the core technologies of 5G, reproduce the new visual system. However, there is a lack of analysis and understanding of the visual operating system to understand the visual system of the fast-changing variety of imaging media. This study analyzed the three visual systems appearing in the recent imaging media art area and presented an engineering perspective algorithm for its procedures and methods. Through these results, we want to build algorithms that understand the visual system of virtual reality HMD devices.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.145-157
• /
• 1994

Litho printing ink vehicles based on rosin modified phenolic are faster drying, have better durability, are harder and glosser and have greater resistance to water than ones based on ester gums. Ink-Water balance and rheological properties are important in litho printing process. These physical properties is concerned with molecular weight of Resin to use vehicle. So this paper was studied about the effects of changing molecular weight of Rosin modified phenolic on surface tension, viscosity, pseudoplasticity and printability of Litho Inks. The results were as follows. 1) The surface tension of model inks depended on the molecular \veight of the resin : Dispersion componnent of ink increase but non dispersion component decrease as molecular weight of Resin increase. 2) Water pick-up of litho ink is more fast balance, using low molecular weight of Resin. 3) Viscosity, Yield value and Newtonian value of model inks increase as molecular weight of Resin increase. 4) The litho ink prepared with the modified phenolic of which molecular weight is about 20000 showed the highest printing density and gloss.

• 전자공학회논문지S
• /
• 제35S권3호
• /
• pp.93-101
• /
• 1998

In Integrated Tube Components(ITC) process in themanufacturing of color display tube, we describe the necessity of the convergence measurement method using photo sensors. Compared with methods using 1D or 2D cameras, its characteristics is to use of moving image patterns and fixed sensors. This measurement method is formulated as the measurement problem of the phase difference in phase changing periodic signals. The convergence measurement system using photo sensors, for the good performance, must have a small standard deviation for the repetitive measurement in the same condition and a fast measurement time for thecovergence change. By above two conditions, we proposed the real time measurement algorithm of the pahse difference using fundametal and harmonic in phase changing periodic signals. And, the proposed algorithm is applied to the convergence measurement system.

• Journal of information and communication convergence engineering
• /
• 제9권1호
• /
• pp.110-116
• /
• 2011

The production environment of fast and accurate news video has been continuously changing together with technology advance. Especially, the editing of the news video advanced focusing on the non-linear system by the introduction of digital technology and the recording of news video advanced to 'tapeless' base. In this new news video production environment, the recorded news videos are transmitted, edited and archived through the NPS (Network Production System), which dramatically improves the efficiency of the news video production. However, there are some issues which need to be resolved in the introduction of NPS. The purpose of this research is to identify the necessity of NPS introduction in the changing news video production environment, explore the issues which should be resolved and suggest the proper way to introduce the NPS to broadcasting companies.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 추계 학술대회논문집
• /
• pp.58-62
• /
• 2001

Aparallel computing environment was constructed based on Windows 2000 operating system. This cluster was configured using Fast-Ethernet system to hold up together the clients within a network domain. For the parallel computation, MPI implements for Windows such as MPICH.NT.1.2.2 and MP-MPICHNT.1.2 were used with Compaq Visual Fortran compiler which produce a well optimized executives for x86 systems. The evaluation of this cluster performance was carried out using a preconditioned Navier-Stokes code for the 2D analysis of a compressible and viscous flow around a compressor blade. The parallel performance was examined in comparison with those of Linux clusters studied previously by changing a number of processors, problem size and MPI libraries. The result from the test problems presents that parallel performance of the low cost Fast-Ethernet Windows cluster is superior to that of a Linux cluster of similar configuration and is comparable to that of a Myrinet cluster.

• ETRI Journal
• /
• 제35권6호
• /
• pp.1029-1037
• /
• 2013

This paper introduces a novel and fast synthesizing method for 3D motions of quadrupedal animals that uses only a small set of motion capture data. Unlike human motions, animal motions are relatively difficult to capture. Also, it is a challenge to synthesize continuously changing animal motions in real time because animals have various gait types according to their speed. The algorithm proposed herein, however, is able to synthesize continuously varying motions with proper limb configuration by using only one single cyclic animal motion per gait type based on the biologically driven Froude number. During the synthesis process, each gait type is automatically determined by its speed parameter, and the transition motions, which have not been entered as input, are synthesized accordingly by the optimized asynchronous motion blending technique. At the start time, given the user's control input, the motion path and spinal joints for turning are adjusted first and then the motion is stitched at any speed with proper transition motions to synthesize a long stream of motions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1597-1600
• /
• 2006

LCD business has grown up changing its strategy and main focus by the order of NBPC, MNT and TV for decades. The presence of PDP drives TV market more demanding. The performance of LCD is required to be improved to struggle against PDP. To strengthen the competitiveness in the market, IPS and VA have evolved in various structures such as H-IPS, AS-IPS, and S-PVA. The introduction of new structures which have multi domains requires the interpretation of disclination area. We developed a new simulation tool based on fast Q-tensor method. It enables us to predict the shape of disclinations and the resulting optical properties. We applied this simulation tool to the development of 26-inch wide monitor having H-IPS mode.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.785-786
• /
• 2008

In this paper, we propose a fast Motion Estimation (ME) algorithm for low computational complexity based on spatial correlations. The proposed algorithm uses the motion vector of neighboring blocks, to decide the location of initial searching point. The number of searching point decreases by changing the location of initial searching point. Experimental results show that the proposed algorithm reduces searching points about $7{\sim}13%$ and increases PSNR about $0.1{\sim}0.5$(dB) compared with conventional algorithm.

• BMB Reports
• /
• 제30권4호
• /
• pp.253-257
• /
• 1997

Negative ion fast atom bombardment (FAB) mass spectra were found to allow the determination of the linkage positions in a series of underivatized linkage-isomeric oligosaccharides. A previous work (Laine et al., 1988) reported that ion patterns of linkage-isomeric trisaccharides could be distinguished by a positive ion. Negative ion FAB collison-activated dissociation (CAD) mass spectrometry (MS) spectra of trisaccharides exhibited better sensitivity than the positive ion mode and provided specific fragmentation patterns according to the linkage positions. Especially, the fragmentations, m/z 205 in F6 and m/z 221 in G6, not occuring in 1-3 or 1-4 linkage. were an indication of 1-6 linkage, by changing collision energies from + 10 eV to +60 eV. The survival ratios of molecular ions in each collision energy set gave support to previous results in which the order of bond stability was 1-6>1-4>1-3 linkage.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1665-1670
• /
• 2023

It is shown that in the IBR-2M reactor by the end of the reactor cycle, changes in dynamics are observed associated with a strong weakening of the fast power feedback (PF), as a result of which the reactor becomes oscillatorily unstable. After each week of zero-power operation the negative changes in reactor dynamics disappear and the stability of the reactor is restored. Thus, the reactor undergoes cyclic changes in the oscillatory instability. The correlation between of a fast PF and a slow PF is experimentally observed, which makes it possible to almost completely eliminate the cyclic component of instability by changing the control mode of rods of the control system.