• 전력전자학회논문지
• /
• 제27권2호
• /
• pp.165-173
• /
• 2022

The electrification trend of mobility increases every year due to the development of power semiconductor and battery technology. Accordingly, the development and distribution of fast chargers for electric vehicles (EVs) are in demand. In this study, we propose a design and implementation method of an LLC converter for fast chargers. Two 15 kW LLC converters are configured in parallel to have 30 kW rated output power, and the control algorithm and driving sequence are designed accordingly and verified. In addition, the improved power conversion efficiency is confirmed through zero-voltage switching (ZVS) of the LLC converter and reduction of turn-off loss through snubber capacitors. The implemented 30 kW LLC converters show a wide output voltage range of 200-950 V. Experiments applying various load conditions verify the converter performance.

• 한국초전도ㆍ저온공학회논문지
• /
• 제13권1호
• /
• pp.41-45
• /
• 2011

Hybrid fault current limiters (FCL) have been researched at Yonsei University. The hybrid FCL has advantages such as having a rapid response to a sudden fault situation and a fast recovery time from a quench. It consists of an asymmetric HTS coil, a switching module, and a bypass reactor. The asymmetric HTS coil is wound with two different types of HTS wires in an opposite direction so that it has nearly zero inductance at the superconducting state. When the quench occurs at the fault state, a strong magnetic field is generated from the asymmetric coil because of different quench characteristics of two HTS wires, and then a repulsive force is induced in the switching module. The force opens the switch and the fault current is pushed into the bypass reactor. In this research, we analyzed the cause of the repulsive force and confirmed, experimentally and computationally, that the magnitude of a repulsive force is varied by changing the gap distance between the asymmetric coil and the switching module. By using the FEM simulation, we calculated the repulsive force with respect to the gap distance and verified that the effect of the gap distance. Then, short circuit test was carried out to confirm the correct operation of the fast switch.

• 한국정보통신학회논문지
• /
• 제10권12호
• /
• pp.2264-2270
• /
• 2006

본 논문에서는 MB-OFDM 방식의 UWB 시스템 응용을 위한 fast-hopping 주파수 합성기들을 설계하였다 세 개의 중심 주파수(3432MHz, 3960MHz, 4488MHz) 생성이 필요한 주파수합성기를 세 가지 구조로 각각 설계하고 성능을 비교하였다. 첫 번째 구조는 4224MHz의 주파수에서 동작하는 단일 PLL을 사용하여 세 개의 중심 주파수를 합성하고, 두 번째 구조는 각각의 중심 주파수에서 동작하는 세 개의 PLL을 사용한다. 본 논문에서 제안된 세 번째 구조는 3960MHz와 528MHz에서 동작하는 두 개의 PLL을 사용하여 원하는 주파수를 합성한다. 0.18um RF CMOS 공정변수를 이용하여 모의실험 한 결과 세 번째 구조가 다른 구조에 비해 switching time, spur, 칩 면적 및 전류 소모 면에서 좋은 특성을 보인다. 제안된 세 번째 구조의 주파수 합성기는 1.3ns 이하의 band switching 특성과 -36dBc 이하의 spur특성을 보이며 1.8V 공급전원 하에서 22mA의 전류를 소모한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권2호
• /
• pp.153-162
• /
• 2014

A novel robust $H_{\infty}$ switching tracking control design method with disturbance observer is proposed for the near space interceptor (NSI) with aerodynamic fins and reaction jets. Initially, the flight envelop of the NSI is divided into small subregions, and a slow-fast loop polytopic linear parameter varying (LPV) model is proposed, to approximate the nonlinear dynamic of the NSI, based on the Jacobian linearization and Tensor-Product (T-P) model transformation approach. A disturbance observer is then constructed, to estimate the modeled disturbance. Subsequently, based on the descriptor system method, a robust switching controller is developed, to ensure that the closed-loop descriptor system is stable with a desired $H_{\infty}$ disturbance attenuation level. Furthermore, the outcome of the proposed switching tracking control problem is formulated as a set of linear matrix inequalities (LMIs). Finally, simulation results demonstrate the effectiveness of the proposed design method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.1042-1046
• /
• 1998

A new soft switching isolated bi-directional phase shifted pulse width modulation (PSPWM) dc/dc converter is presented. Due to the use of the energy recovery snubber, the isolated bi-directional PSPWM dc/dc converter has a significant reduction of switching losses in the switching devices of the primary and secondary side bridge, respectively. The proposed soft switching bi-directional PSPWM FB dc/dc converter provides an energy recovery snubber which consists of two fast recovery diodes, a resonant capacitor and a resonant inductor. The complete operating principles and simulation results will be presented.

• 한국통신학회논문지
• /
• 제37C권10호
• /
• pp.888-893
• /
• 2012

Quality of Service (QoS) provisioning is an important issue in the design of next generation wireless network. In visible light communication (VLC) networks, link switching is a solution to maintain or improve the quality of communication. In this paper, we propose a novel link switching scheme using the location of mobile nodes (MNs). The current serving transmitter uses location history of the MN to find out which neighbor transmitter the MN is approaching. This neighbor transmitter is chosen to inform the MN as the next serving transmitter. The simulation results show that our proposed scheme gains better performance than non-predictive link switching scheme.

• 대한전기학회논문지
• /
• 제43권5호
• /
• pp.761-769
• /
• 1994

VCB (Vacuum Circuit Breaker), with the strong arc extinction capability in switching the source of an induction motor, occurs the severe switching surge voltage which can cause the breakdown or the deterioration of motor insulation. Therefore, a method which reduces surge voltage across motor windings is necessary. So, it is analyzed that fast-rise-time surges resulting from VCB switching operations give rise to severe voltage stress on turn insulation. Additionally, the switching surge simulation algorithms using EMTP are developed, and C, R values of surge suppressor minimizing the steep-fronted stress in winding insulation surges are calculated.

• Journal of the Optical Society of Korea
• /
• 제5권2호
• /
• pp.39-42
• /
• 2001

A new method of switching mode in AFLC cell is proposed for faster switching time and higher contrast ratio. In this mode the ″dark″ state is obtained by applying negative full voltage while the ″bright″ state is achieved by applying positive full voltage to the cell. The switching time is reduced to 100 $mutextrm{s}$ for the cell whose switching time is 22 ms when operated in conventional mode. The contrast ratio is also improved vastly with this method. The possibility of achieving gray scale was shown in this mode of operation.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.1097-1108
• /
• 2017

Accurate calculation of the conduction and switching losses of a power electronic converter is required to achieve the efficiency of the converter. Such calculation is also useful for computing the junction temperature of the switches. A few models have been developed in the articles for calculating the switching energy losses during switching transitions for the given values of switched voltage and switched current. In this study, these models are comprehensively reviewed and investigated for the first time for ease of comparison among them. These models are used for calculating the average amount of switching power losses. However, some points and details should be considered in utilizing these models when switched current or switched voltage presents time-variant and alternative quantity. Therefore, an applicable technique is proposed in details to use these models under the above-mentioned conditions. A proper switching loss model and the presented technique are used to establish a new and fast method for obtaining the average switching power losses in any type of power electronic converters. The accuracy of the proposed method is evaluated by comprehensive simulation studies and experimental results.

• Bulletin of the Korean Chemical Society
• /
• 제32권spc8호
• /
• pp.3057-3062
• /
• 2011

We have synthesized and characterized the first cyclic co-oligomeric ferroelectric liquid crystals (FLCs) based on cyclic siloxanes and found that the co-oligomer containing two different mesogenic units exhibits $SmC^*$ mesophase over a wide temperature range from $65^{\circ}C$ to $135^{\circ}C$, much wider than those of the monomer counterparts and the cyclic homo-oligomers. The cyclic co-oligomeric liquid crystal readily filled the display cell and exhibited fast switching times in the range of 4 ms to 6 ms over the entire $SmC^*$ phase. Moreover, the practical absence of layer shrinkage, attributed to de Vries-type transition, shows an additional significant advanage for cyclic co-oligomeric FLCs in LCD applications.