• 산업경영시스템학회지
• /
• 제32권1호
• /
• pp.94-101
• /
• 2009

Complex Products may present more than one type of defects and these defects are not always of equal severity. These defects are classified according to their seriousness and effect on product quality and performance. Demerit systems are very effective systems to monitoring the different types of defects. So, classical demerit control chart used to monitor counts of several different types of defects simultaneously in complex products. S.M. Na et al.(2003) proposed the Demerit-CUSUM for the improvement of the demerit control chart performance and Nembhard, D. A. et al.(2001) and G.Y Cho et al.(2004) developed a Demerit control chart using the EWMA technique and evaluated the performance of the control chart. In this paper, we present an effective method for process control using the Demerit-CUSUM with fast initial response. Moreover, we evaluate exact performance of the Demerit-CUSUM control chart with fast initial response, Demerit-CUSUM and Demerit-EWMA according to changing sample size or parameters.

• 한국자기학회지
• /
• 제19권6호
• /
• pp.222-226
• /
• 2009

기존의 평판형 전자기 엑츄에이터에 쇼티드 턴을 적용한 새로운 형태의 평판형 전자기 엑츄에이터를 제안하였다. 기존의 평판형 전자기 엑츄에이터에서 발생하는 인덕턴스에 의한 초기응답 지연현상을 줄이기 위해 본 논문에서는 기존의 엑츄에이터의 요크와 요크 사이에 중간요크(center yoke)를 추가하고, 쇼티드 턴을 적용한 새로운 형태의 평판형 전자기 엑츄에이터를 제안 하고, 상용 자기장 해석 프로그램인 MAXWELL을 이용한 시뮬레이션을 통해 동적 성능 향상을 검증 하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권6호
• /
• pp.810-817
• /
• 2014

An on-chip current sensor with fast response time for the peak-current-mode buck regulator is proposed. The initial operating points of the peak current sensor are determined in advance by the valley current level, which is sensed by a valley current sensor. As a result, the proposed current sensor achieves a fast response time of less than 20 ns, and a sensing accuracy of over 90%. Applying the proposed current sensor, the peak-current-mode buck regulator for the mobile application is realized with an operating frequency of 2 MHz, an output voltage of 0.8 V, a maximum load current of 500 mA, and a peak efficiency of over 83%.

• Journal of information and communication convergence engineering
• /
• 제1권4호
• /
• pp.189-193
• /
• 2003

A new algorithm is presented for adaptive notch filtering of narrow band or sine signals for embedded among broad band noise. The notch filter is implemented as a constrained infinite impulse response filter with a minimal number of parameters, Based on the recursive prediction error (RPE) method, the algorithm has the advantages of the fast convergence, accurate results and initial estimate of filter coefficient and its covariance is revealed. A convergence criterion is also developed. By using the information of the noise-to-signal power, the algorithm can self-adjust its initial filter coefficient estimate and its covariance to ensure convergence.

• Journal of Information Display
• /
• 제6권3호
• /
• pp.6-11
• /
• 2005

In this paper, a general performance of the PSS-LCD or Polarization Shielded Smectic Liquid Crystal Display is discussed. This smectic base LCD does not use any spontaneous polarization, but uses induced polarization just sa me with current nematic base LCDs. Specific initial molecular alignment as well as specific cell design realizes ext remely fast optical response speed with native wide viewing angle. Moreover, this performance is provided by full compatible electronics for current conventional LCDs. A general performance of the PSS-LCD is introduced herein.

• 한국자기학회지
• /
• 제20권1호
• /
• pp.24-27
• /
• 2010

솔레노이드 전자기 엔진 밸브 액츄에이터는 현재의 내연 연소 엔진의 가변 밸브 타이밍에 가장 적합하고 진보된 장치이다. 하지만 솔레노이드 전자기 액츄에이터는 전력소모가 크다는 단점을 가지고 있다. 따라서 전력소모가 작은 가변 밸브 타이밍을 구현하기 위해 영구자석을 활용한 새로운 전자기 엔진 밸브 액츄에이터를 제안한다. 이 연구에서는 엔진 밸브의 과도운동 시간의 최소화를 통해 엔진의 속도를 극대화하기 위하여 새롭게 제안한 액츄에이터의 형상을 최적 설계하였다. 최적화를 위해 유전자 알고리즘을 사용하고 Matlab과 Maxwell을 활용하여 전역 최적화 시뮬레이션을 수행하였다.

• 한국공간구조학회논문집
• /
• 제20권2호
• /
• pp.77-85
• /
• 2020

This paper examined the dynamic instability of a shallow arch according to the response characteristics when nearing critical loads. The frequency changing feathers of the time-domain increasing the loads are analyzed using Fast Fourier Transformation (FFT), while the response signal around the critical loads are analyzed using Hilbert-Huang Transformation (HHT). This study reveals that the models with an arch shape of h = 3 or higher exhibit buckling, which is very sensitive to the asymmetric initial conditions. Also, the critical buckling load increases as the shape increases, with its feather varying depending on the asymmetric initial conditions. Decomposition results show the decrease in predominant frequency before the threshold as the load increases, and the predominant period doubles at the critical level. In the vicinity of the critical level, sections rapidly manifest the displacement increase, with the changes in Instantaneous Frequency (IF) and Instant Energy (IE) becoming apparent.

• 전기학회논문지
• /
• 제66권10호
• /
• pp.1523-1531
• /
• 2017

In general, the thrust vector control should be fast and stable in the initial launch phase. Two types of conventional controllers, one is for pitch angle control and the other is for pitch rate control, are designed based on the equation of motion without aerodynamics and are compared in the viewpoints of the stability margin and the time response performance. Also analyzed are the rejection capabilities to cope with high aerodynamic disturbances caused by high angle of attacks in initial booting phase. Additionally, time response features at actuator saturation are investigated. Based on those results, we suggest a controller structure which is more suitable for thrust vector control of missiles at initial booting phase.

• 품질경영학회지
• /
• 제38권3호
• /
• pp.313-321
• /
• 2010

The coefficient of variation represents the ratio of the standard deviation to the mean, and it is a useful statistic for comparing the degree of variation from one data series to another, even if the means are drastically different from each other. Recently, the CV control chart is developed for monitoring processes in such situations. However, the CV control chart has low performance in detecting small shift. Due to the development of equipment and technique, currently, small shift of process occurs more frequently than large shift. In this paper, we proposes the CV-CUSUM control chart using CUSUM scheme which is cumulative sum of the deviations between each data point and a target value to detect a small shift in the process. We also found that the FIR(fast initial response) CUSUM control chart is especially valuable at start-up or after a CV-CUSUM control chart has signaled out-of-control.

• 대한기계학회논문집A
• /
• 제29권4호
• /
• pp.578-583
• /
• 2005

This paper introduces a fast Fourier transform (FFT)-based spectral dynamic analysis method for the transient responses as well as the steady-state responses of the linear discrete systems subject to non-zero initial conditions. The forced vibration of a viscously damped three-DOF system is considered as the illustrative numerical example. The proposed spectral analysis method is evaluated by comparing its results with the exact analytical solutions and the numerical solutions obtained by the Runge-Kutta method.