• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.682-686
• /
• 2010

In this paper, we propose the fast wakeup and connection mechanisms for various energy saving schemes in order to improve QoS. First, we offer the interconnection of heterogeneous access networks via the Media Independent Information Server/Service (MIIS). Then, we propose the fast wakeup and connection mechanism for multi-interface communication systems. The proposed novel mechanism focuses on the fast provision of incoming service destined to the interface currently in energy saving mode by using MIIS-assisted interconnection. We further evaluate the performance of proposed mechanism through the numerical and experimental analysis.

• Journal of Advanced Navigation Technology
• /
• v.21 no.4
• /
• pp.402-412
• /
• 2017

The convergence of broadcasting and telecommunication technologies is a key issue of the ubiquitous networks. So this paper offers the convergence of integrated telecommunication networks and broadcasting system, Advanced Terrestrial Digital Multimedia Broadcasting (AT-DMB), and the interconnection of them via the Media Independent Information Server/Service (MIIS). Then, this paper proposes the fast wakeup and connection mechanism with concepts for improving QoS and energy efficiency simultaneously. In the proposed convergence network, our mechanism places the key on the minimization of both the incoming service delay destined to a turned-off interface by using the broadcasting network and the additional energy consumption. This paper further evaluates the performance of proposed mechanism through the numerical and experimental analysis and has confirmed the decrease of both service delay and energy consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.6
• /
• pp.631-639
• /
• 2016

Wi-Fi Direct standard technology has been widely deployed on the recently manufactured products such as smart phone, smart monitor, TV, set-top box, and gaming console, and it was published from Wi-Fi Alliance with the name of Wi-Fi Peer-to-Peer Technical Specifications (v1.4, 2014) for direct connection on the wireless communication environment. However, the connection process of this standard needs 5 to 10 seconds so it can lead to user's inconvenience as well as long delay for connection. From the focus of that this problem was derived from long discovery process composed of Scan and Find, as a result, the proposed scheme on this paper modified and adapted Scan and Find processes with reassembling steps of them for reducing the connection delay. In addition, the analysis and experiments were progressed for the evaluations of the proposed scheme.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.1
• /
• pp.68-72
• /
• 2013

The series connection-type superconducting fault current limiter (SFCL) with two magnetically coupled circuits was suggested and its effectiveness through the analysis on the current limiting and recovery characteristics was described. The fault current limiting characteristics of the proposed SFCL as well as the load voltage sag compensating characteristics according to the winding direction were investigated. To confirm the fault current limiting and the voltage sag suppressing characteristics of the this SFCL, the short-circuit tests for the simulated power system with the series connection-type SFCL were carried out. The series connection-type SFCL designed with the additive polarity winding was shown to perform more effective fault current limiting and load voltage sag compensating operations through the fast quench occurrence right after the fault appears and the fast recovery operation after the fault removes than that with the subtractive polarity winding.

• Journal of the Korea Concrete Institute
• /
• v.16 no.4 s.82
• /
• pp.573-579
• /
• 2004

For the fast construction and replacement of bridges in urban area, a prefabricated bridge system can be an excellent alternative. Details of prefabricated slabs for PSC girders were developed and static tests on shear connections were conducted to propose design equations of the shear connection. Stirrups and stud connectors were used as shear connectors and non-shrink mortar was used for the filling material in shear pockets for shear connectors. Stirrups and studs were fabricated to insert embedded nut-type devices in PSC girders. Shear strength of the shear connection considering chemical bond, friction and mechanical connectors was evaluated and empirical equations were suggested. Due to the mechanical connectors, ultimate slip capacity of the shear connection was sufficient for shear load redistribution, and suggested details of the shear connection showed good performance in terms of strength and ductility.

• Computers and Concrete
• /
• v.32 no.3
• /
• pp.339-349
• /
• 2023

Fast-built construction is a key feature for successful applications of precast concrete (PC) moment frame system in recent construction practices. To this end, by introducing some unique splicing details in precast connections, especially between PC columns including panel zones, use of temporary supports and bracings can be minimized based on their self-sustaining nature. In addition, precast wide beams are commonly adopted for better economic feasibility. In this study, three self-sustaining precast concrete (PC) wide beam-column connection specimens were fabricated and tested under reversed cyclic loadings, and their seismic performances were quantitatively evaluated in terms of strength, ductility, failure modes, energy dissipation and stiffness degradation. Test results were compared with ASCE 41-17 nonlinear modeling curves and its corresponding acceptance criteria. On this basis, an improved macro modeling method was explored for a more accurate simulation. It appeared that all the test specimens fully satisfy the acceptance criteria, but the implicit joint model recommended in ASCE 41-17 tends to underestimate the joint shear stiffness of PC wide beam-column connection. While, the explicit joint model along with concentrated plastic hinge modeling technique is able to present better accuracy in simulating the cyclic responses of PC wide beam-column connections.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.76-79
• /
• 2009

Recently there has been much effort, in both academia and industry, to integrate a plethora of wireless technologies in order to provide seamless connection to mobile users. To support seamless connection on terminal needs fast handover function and location management function. Especially, Performing fast handover has to interact with function of datalink layer and mobility based IP. In this paper, we propose a handover decision mechanism using MIH( Media Independent Handover) in hybrid networks to reduce the delay of transmission for data.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.10 s.352
• /
• pp.68-73
• /
• 2006

This, paper proposes a cosimulation methodology that results in an efficient SoC design as well as fast verification by integrating HDL, SystemC, and algorithm-level abstraction using the design tools Active-HDL and Matlab's Simulink. To demonstrate the proposed design methodology, we implemented the design technique on a serial connection multi-channel speaker system. We have demonstrated the proposed cosimulation method utilizing an ARM processor based SoC Master board with the AMBA bus interface and a Xilinx Vertex4 FPGA. The proposed method has the advantage of simultaneous simulation verification of both software and hardware parts in high levels of abstraction mixed with some performance critical parts in more concrete RTL codes. This allows relatively fast and easy design of a speaker connection system which typically requires significant amount of data processing for verification.

• Journal of the Korean Society of Costume
• /
• v.59 no.3
• /
• pp.27-41
• /
• 2009

Interpreting the phenomenon of Fast fashion that is prevalent these days, this research is meaningful in that it prepares the frame which suggests the vision to read the trend of 2000s and analyzes the property of phenomenon of Fast Fashion in the connection with society and culture. The so[io-cultural property can be largely characterized by consumption orientation, change orientation, efficiency, moment and multiculturism. Analyzing the phenomenon of fast fashion that emerged after 2000 on the basis of such sociocultural background, it is largely classified into imitation, fashionability, disposability, portability, transformation and convergence. Due to the hi-polarization of consumption, people tend to select imitated goods, and people accustomed to speed get interested in the fashionability of all Phenomena. Further, society that is transient and changing rapidly makes the habit of purchasing in disposability. The property of nomad society encourages to keep the habit of portability. Such change-oriented society and rapidly changing life pattern make them adapt in diverse transformation modes of Fast Fashion. Further, multi-cultural world integrates enterprises through combination of all cultures and the convergence of all factors.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.530-533
• /
• 2006

This thesis investigates the behavior of precast wall systems with a new vertical connection which are proportioned by the displacement based design. The proposed precast wall systems are supposed to provide additional spaces and seismic strengthening in remodeling existing residential buildings. For a fast remodeling constructions using PC walls require an efficient, economic fabrication method. A C-type vertical connections for PC wall systems is proposed for transfer of bending moment between walls in the vertical direction while a shear key in the center of wall is prepared to transfer shear forces by bearing. The proposed vertical connection allows us easy fabrication because of different direction of slots at the edges of wall. The dimension of C-type connection components are determined by engineering models and a series of test.