• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04c
• /
• pp.62-66
• /
• 2008

Spacecrafts such as most of commercial satellites that are operating in the geostationary orbit can be subjected to intense irradiation by charged particles. The surface made of dielectric materials can therefore become probable sites for damaging electrostatic discharges. Thanks to a specially equipped chamber, the spatial environment can be reproduced experimentally in the laboratory. In this paper, the behavior of high energy electrons injected in polymers such as PolyMethylMetaAcrylate (PMMA) and Kapton is studied. Results obtained by surface potential technique, pulse-electro acoustic device and a cell based on the split Faraday cup system are analyzed and discussed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.03a
• /
• pp.90-106
• /
• 1995

The "O"S' BONDING make metallic and non-metalic crystal structures and form localized superconducting orbitals , which induce electrical conduction , semi-conduction, and superconduction. The orbitals are proced by Ampere's law, Faraday's law , Meissner effect, highcritical temperature of thecopper oxide layers. abnomal trans-membrane signal in cancer cell and plastic deformations bytwins and dislocations, In the case of alloying metals, the most deterimentla cases of electrical conduction are those of solid solution and intermetalic compound . The highest case for the hardness are also those of solid solution and intermetallic compound. It explains the contributions of the "O"S' BONDING for conduction bands and plastic deformation by twins and dislocations.ns and dislocations.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2309-2310
• /
• 2008

The surface made of dielectric materials can therefore become probable sites for damaging electrostatic discharges. Thanks to a specially equipped chamber, the spatial environment can be reproduced experimentally in the laboratory. In this paper, the behavior of high energy electrons injected in polymers such as PolyMethylMetaAcrylate (PMMA) and Kpton is studied. Results obtained by surface potential technique, pulse-electro acoustic device and a cell based on the split Faraday cup system are analyzed and discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.309-310
• /
• 2007

Spacecrafts such as most of commercial satellites that are operating in the geostationary orbit can be subjected to intense irradiation by charged particles. The surface made of dielectric materials can therefore become probable sites for damaging electrostatic discharges. Thanks to a specially equipped chamber, the spatial environment can be reproduced experimentally in the laboratory. In this paper, the behavior of high energy electrons injected in polymers such as PolyMethylMetaAcrylate (PMMA) and Kapton is studied. Results obtained by surface potential technique, pulse-electro acoustic device and a cell based on the split Faraday cup system are analyzed and discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.319-320
• /
• 2007

We researched basic study about electrical characteristics of Zinc Selenide (Faraday Cell), which is known for various temperature of good-performance, that applied measuring current or protecting instrument by Optical Current Transducer, on Gas Insulated Switchgear. Measuring System consists of VCSEL produced 850nm IR Laser, Pin Photo Diode made of GaAs surveyed as Optical Power Meter, and Optical Fibers specified Multi-mode. We observed optical output changes during measurement of currents increasing by 100[A] in range from 0[A] to 1,000[A] and set temperature condition increasing by $5[^{\circ}C]$ in a range from $30[^{\circ}C]\;to\;60[^{\circ}C]$.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1990-1991
• /
• 2007

Spacecrafts such as most of commercial satellites that are operating in the geostationary orbit can be subjected to intense irradiation by charged particles. The surface made of dielectric materials can therefore become probable sites for damaging electrostatic discharges. Thanks to a specially equipped chamber, the spatial environment can be reproduced experimentally in the laboratory. In this paper, the behavior of high energy electrons injected in polymers such as PolyMethylMetaAcrylate (PMMA) and Kapton is studied. Results obtained by surface potential technique, pulse-electro acoustic device and a cell based on the split Faraday cup system are analyzed and discussed.

• Nuclear Engineering and Technology
• /
• v.42 no.2
• /
• pp.183-192
• /
• 2010

An electrochemical reduction of a mixture of metal oxides was conducted in a LiCl molten salt containing 3 wt% $Li_2O$ at $650^{\circ}C$. The oxide reduction was carried out by applying a current to an electrolysis cell, and the $Li_2O$ concentration was analyzed during each run. The concentration of $Li_2O$ in the electrolyte bulk phase gradually decreases according to Faraday's law due to a slow diffusion of the $O^{2-}$ ions. A hindrance effect of the unreduced metal oxides was observed for the reduction of the uranium oxide. Cs, Sr, and Ba of high heat-load fission products were diffused into and accumulated in the salt phase as predicted with thermodynamic consideration.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.208-208
• /
• 2011

최근 유연기판 기술을 기반으로 대면적 roll to roll 공정기술 개발이 활발히 연구됨에 따라 이에 적용 가능한 대면적 플라즈마 소스의 중요성이 대두되고 있다. 대면적 플라즈마 처리 공정에 적용 가능한 소스 중 closed drift 타입의 선형 이온 소스는 제작 및 대면적화가 용이함에 따라 다양한 산업 분야에서 사용되고 있다. 선형 이온 소스를 다양한 표면처리 공정에 효과적으로 적용하기 위해서는 방전 특성에 대한 이해를 바탕으로 각 공정에 맞는 이온빔 전류 밀도, 방전 전압 등의 방전 인자 조절이 필수적이다. 본 연구에서는 표면 개질, 식각 및 박막 증착 등의 다양한 분야에 활용 가능한 선형 이온 소스를 개발하였으며, 선형 이온 소스를 통한 표면 식각 공정을 집중적으로 연구하였다. 전극 및 자기장 구조에 따른 선형 이온 소스 내 플라즈마 방전거동 분석을 위해 object oriented particle in cell(OOPIC) 전산모사를 수행하였으며, 이를 통해 식각 또는 증착 공정에 적합한 이온 소스의 구조 및 공정 조건을 예측하였다. 또한 OOPIC 전산모사를 통해 예측된 이온빔 인출 경향을 Faraday cup을 이용한 이온빔 전류 밀도 측정을 통해 확인하였다. 실리콘 기판 식각 공정의 경우, 이온 전류밀도 및 에너지에 따른 식각 거동 분석, 이온빔 입사각 변화에 따른 식각 특성 분석을 통해 최적 식각 공정 조건을 도출하였다. 특히, 이온빔 입사각 변화에 따른 식각률 변화는 일반적으로 알려진 입사각에 따른 스퍼터링율과 유사한 경향을 보였다. 이온빔 에너지 3 kV, Ar 압력 1.3 mTorr 조건에서 기판 정지 상태시 약 8.5 nm/s의 식각 속도를 얻었다.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.7-12
• /
• 2005

We have observed the nonlinear magneto-optic effect(NMOE) based on atomic coherence in $^{87}$ Rb D$_1$-line using the Rb vapor cell containing 50 Torr of Ne. The width of the NMOE signal was measured to be 2$\pi$${\times}$464 Hz, when the peak-to-peak B-field variation was 1 mGauss. The result of this work may be applied to a high-sensitivity magnetometer.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2006

We investigated the characteristics of the nonlinear magneto-optic effect (NMOE) depend on the transitions, the laser intensity and the temperature of the vapor cell, in the $D_1$ transition of $^{87}Rb$ atoms by using the Rb vapor cell contained with buffer gas of Ne 6.7 kPa. The size and the width of NMOE signal were increased according to the light intensity and temperature in the transition of F=2$\to$F'=2. However, In the case of using the F=2$\to$F'=1 transition, the size of the signal could be increased according to the light intensity without additional broadening of the width. We confirmed that the sensitivity of detecting small magnetic flux improved in this transition, and explained these effects by the different of the CPT configuration between Zeeman sublevels. At the optimal condition in experiment, the sensitivity of this system was evaluated less then $70pT/\sqrt{Hz}$.