• 제목/요약/키워드: Faraday Cage

검색결과 18건 처리시간 0.034초

패러데이 케이지와 에어로졸 하전기의 설계 및 성능평가 (Design and Performance Evaluation of a Faraday Cage and an Aerosol Charger)

  • 지준호;배귀남;황정호
    • 대한기계학회논문집B
    • /
    • 제28권3호
    • /
    • pp.315-323
    • /
    • 2004
  • An electrical cascade impactor is a multi-stage impaction device to separate airborne particles into aerodynamic size classes using particle charging and electrical detection techniques. A Faraday cage and an aerosol charger, which are basic components of the electrical cascade impactor, were designed and evaluated in this study. The low-level current response of the Faraday cage was investigated with changing particle size and air flow rate by using sodium chloride (NaCl) particles. The response of the prototype Faraday cage was very similar to that of a commercial aerosol electrometer (TSI model 3068) within ${\pm}$5% for singly-charged particles. The response linearity of the prototype Faraday cage could be extended up to flow rate of 30 L/min. For the performance evaluation of the aerosol charger the monodisperse liquid dioctyl sebacate (DOS) particles, with diameters of 0.1∼0.8$\mu\textrm{m}$, were generated using spraying from an atomizer followed by evaporation-condensation process. Typical performance parameters of the aerosol charger such as P$.$n, wall loss, and elementary charges per particle were evaluated. The performance of the prototype aerosol charger was found to be close to that of the aerosol charger used in an electrical low pressure impactor (ELPI, Dekati).

Faraday Cage를 이용한 900 MHz RFID 소형 LTCC 패키지 리더 안테나의 설계 (Design of a 900 MHz RFID Compact LTCC Package Reader Antenna Using Faraday Cage)

  • 김호용;문병인;임형준;이홍민
    • 한국전자파학회논문지
    • /
    • 제18권5호
    • /
    • pp.563-568
    • /
    • 2007
  • 본 논문에서 제안된 패키지 안테나는 900 MHz RFID 대역에 적용하기 위하여 미엔더 라인과 단락 핀을 부설하고 LTCC(Low Temperature Cofired Ceramic) 층의 공동 내부에 RFID BGA(Ball Grid Array) 칩을 장착하였다. BGA 칩과 안테나 사이에 발생되는 커플링과 혼신을 감소시키기 위한 격리 특성을 확보하기 위하여 접지면과 비아 펜스를 부설하여 Faraday Cage를 구현하였다. 제안된 안테나는 낮은 주파수 대역에서 패키지 단계의 안테나 구현에 관점을 두었다. 제안된 안테나의 크기는 $13mm{\times}9mm{\times}3.51mm$이며, 측정된 안테나의 공진 주파수는 0.893 GHz, 임피던스 대역폭은 9 MHz, 최대 방사 이득은 -2.36 dBi를 나타내었다.

폐자동차(廢自動車) 라디에이터로부터 Nylon 회수(回收)를 위한 마찰하전정전선별(摩擦荷電靜電選別) 기술개발(技術開發) (Development of Triboelectrostatic Separation Technique for Recovery of Nylon from Radiator of End-of-Life Vehicle)

  • 백상호;전호석;김수강;이광훈
    • 자원리싸이클링
    • /
    • 제22권1호
    • /
    • pp.29-35
    • /
    • 2013
  • 본 연구에서는 마찰하전정전선별을 적용하여 폐자동차 라디에이터의 Nylon을 회수하기 위한 재질분리 연구를 수행하였다. 시료(Nylon, PP glass)의 효율적인 재질분리를 위하여, 각각의 시료를 대상으로 다양한 하전재질에 따른 하전극성과 하전량을 faraday cage로 조사하였다. 그리고 시료를 분극할 수 있는 재질을 대상으로 기초 분리실험을 수행하여 하전재질을 선정하였다. 선정된 하전재질을 사용하여 연속처리가 가능한 마찰하전정전선별 장치를 개발하였으며, 다양한 조건별로 분리실험을 수행하여 시료의 회수 가능성을 확인하였다.

Preliminary Study on the Measurement of the Electrostatic Charging State of PM2.5 Collected on Filter Media

  • Okuda, Tomoaki;Yoshida, Tetsuro;Gunji, Yuma;Okahisa, Shunichi;Kusdianto, K.;Gen, Masao;Sato, Seiichi;Lenggoro, I. Wuled
    • Asian Journal of Atmospheric Environment
    • /
    • 제9권2호
    • /
    • pp.137-145
    • /
    • 2015
  • This study focused on the measurement of the actual charging state of ambient aerosol particles, which is important for understanding the intricate process of adverse health effects caused by particulate matter (PM). The net electrostatic charging state of $PM_{2.5}$ collected on filter media was measured in this study. The Faraday cage method and surface potential measurements were used in this study. The results showed that the polarities of the net charging state measured using these two methods were in agreement for 42 out of 48 samples (87.5%), and 36 samples (75%) were negatively charged. The filters were not significantly charged by friction between the filters and air not containing PM. Charge addition to or leakage from the filters was not observed over a two-month storage period. Net charging state of $PM_{2.5}$ collected on the filters was concluded to be negative in most cases, based on data's support of the assumption that aerosol charging state is not altered by the process of PM collection using filter.

ELECTRONIC SAFING OF A DIODE LASER ARM-FIRE DEVICE

  • Kenneth E. Willis;Suk Tae Chang
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 1995년도 제4회 학술강연회논문집
    • /
    • pp.171-175
    • /
    • 1995
  • Semiconductor diode lasers that can generate one watt or more of optical energy for tens of milliseconds (quasi continuous wave) are now readily available. Several researchers have demonstrated that this power level, when properly coupled, can reliably initiate pyrotechnic mixtures. This means that the initiator containing the pyrotechnic can be protected against inadvertent initiation from electromagnetic radiation or electrostatic discharge by a conducting Faraday cage surrounding the explosive. Only a small dielectric window penetrates the housing of the initiator, thereby eliminating the conductors necessitated by a bridgewire electroexplosive device. The diode laser itself, however, functions at a low voltage (typically 3 volts) and hence is susceptible to inadvertent function from power supply short circuits, electrostatic discharge or induced RF energy. The rocket motor arm-fire device de-scribed in this paper uses a diode laser, but protects it from unintentional function with a Radio Frequency Attenuating Coupler (RFAC).The RFAC, invented by ML Aviation, a UK company, transfers power into a Faraday cage via magnetic flux, thereby protecting the diode, its drive circuit and the pyrotechnic from all electromagnetic and electrostatic hazards. The first production application of a diode laser and RFAC device was by the Korean Agency for Defense Development.

  • PDF

폐플라스틱 정전분리를 위한 하전특성에 관한 연구 (A Study on Surface Charge Characteristics on Various Plastic Materials for Ttiboelectrostatic Separation of Plastic Wastes)

  • 김도균;조희찬;전호석
    • 자원리싸이클링
    • /
    • 제11권3호
    • /
    • pp.37-45
    • /
    • 2002
  • 마찰대전 분리는 서로 상이한 두 물체를 마찰시켜 각자 반대극성으로 하전시킨 후 전기장에 통과시켜 분리하는 기술이며, 이때자 물질의 하전극성은 work function에 의해 각기 다른 극성으로 하전된다. 본 연구에서는 마찰대전을 이용한 정전분리에 기본이 되는 각종 플라스틱의 work function을 알아보는 데 중점을 두었으며 마찰대전 후 하전량에 따른 분리 효율을 도출하여 최적의 운전조건을 위한 하전특성을 알아보았다. 플라스틱 시료는 2가지의 샘플을 가지고 실험하였으며. 이를 각기 다른 재질의 드럼형 마찰하전장치를 이용하여 대전을 시켰다. 또한 Faraday Cage를 이용하여 하전량을 측정한 후 work function을 도출하였다. 하전된 입자는 $\pm$20 kV의 전장에 통과시켜 분리실험을 수행하고 이를 통해서 하전량과 분리효율간의 상관관계를 도출하였다.

전기적 임팩터용 페러데이 케이지의 성능평가 (Performance Evaluation of the Faraday Cage for a Electrical Impactor)

  • 지준호;배귀남;황정호;이규원
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2000년도 추계학술대회 논문집
    • /
    • pp.117-118
    • /
    • 2000
  • 대전 입자의 거동은 입자의 제어 측면뿐만 아니라 입자의 측정에서 중요한 요소 중 하나이다. 특히, 입자를 실시간으로 측정하는 경우 입자의 대전량을 정밀하고 정확하게 측정하는 것은 측정 대상이 심하게 변할 때 매우 중요하다. 입자의 전기적 특성(대전량)을 이용하여 입경분포를 측정하는 장비로는 EAA(electrical aerosol analyzer), SMPS(scanning mobility particle sizer), ELPI(electrical low pressure impactor) 등이 있다. (중략)

  • PDF

변압기유의 불순물에 따른 유동대전 영향 (The Effect on the Streaming Electrification of Insulating Oils with Impurity)

  • 이용우;이광석;송병기;김왕곤;홍진웅
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1996년도 추계학술대회 논문집
    • /
    • pp.329-333
    • /
    • 1996
  • In this Paper, the streaming electrification of transformer oils generated at the interface of transformer oils and the AC breakdown with impurity is studied. The electrification current is measured by the electrometer connected the faraday cage. And a oil velocity is maintained equally. In case of the AC breakdown test, the temperature are 30[$^{\circ}C$], 50[$^{\circ}C$], 80[$^{\circ}C$] and 90[$^{\circ}C$], repetitively. As a result of breakdown experiment, the dielectric breakdown strength is decreased in low temperature region and is increased in high temperature region according to increase of contained sodium. In case of streaming electrification experiment, the streaming current is more increased with the specimen contained sodium than the original specimen.

  • PDF

전자파 챔버에서의 차폐특성 분석

  • 장재웅;김태윤;장경덕;문귀원
    • 천문학회보
    • /
    • 제37권2호
    • /
    • pp.135.2-135.2
    • /
    • 2012
  • 일반적으로 전자파챔버는 패러데이 케이지(Faraday Cage)라고 불리는 금속재질의 차폐구조물과 구조물 내부에서 발생할 수 있는 전자파의 반사를 억제하는 전파 흡수체로 구성되어 있다. 전자파 환경시험의 무결성을 유지하기 위해서는 챔버 내부에서 발생하는 전자기파가 외부로 나가는 것이 차단되어야 하며 역으로 챔버 외부에서 발생하는 전자기파도 챔버 내부로 유입되지 않도록 전자파챔버 차폐완결성이 유지되어야 한다. 이를 정량적으로 측정함으로서 전자파챔버의 차폐율(Shielding Effectiveness)이 정의될 수 있다. 이상적으로는 전자파챔버의 차폐구조물이 이음새 없이 완벽한 차폐완결성이 유지되어야 하나, 시험품의 이동을 위한 도어 및 외부 EGSE와 시험품간 전기적인 연결을 위한 포트 플레이트의 설치로 인해 완벽한 차폐완결성을 유지하는 것은 불가능하다. 따라서, 본 논문에서는 항공우주연구원에 설치된 전자파챔버의 일반 차폐면, 도어, 포트 플레이트에 대한 차폐율 측정을 통해 차폐율을 정량적으로 검증하였다. 또한, 본 측정 경험과 결과 분석은 전자파 챔버에서 이뤄지는 전자파환경시험의 신뢰성을 증진하고 향후 전자파 챔버 유지보수 및 대형 위성의 전자파 환경시험을 위한 대형 전자파 시험시설의 성능시험을 위해 활용될 수 있을 것이다.

  • PDF