• Journal of Preventive Medicine and Public Health
• /
• v.27 no.3 s.47
• /
• pp.447-463
• /
• 1994

Despite the public health importance of injury and poisoning in terms of its high mortality and incidence, epidemiologic information to be utilized are scarce in Korea. This study was carried out in 1990 on a representative sample population (about 55,000 persons) along with the 6th National Tuberculosis Prevalence Survey in order to estimate the magnitude of injury and poisoning occurrence and to identify its epidemiologic characteristics which can be aided for establishing preventive strategy. Pre-tested and structured Questionnaire was used by trained interviewer to collect data including general information of the person, various information on the injury and poisoning during the past one year such as time and place of its occurrence, its nature and external causes, type of medical institute attended, duration of treatment and outcome of the accident occured. In analysis of the data collected incidence rates per 1000 persons by sex, age group and its nature as well as external causes, and relative frequencies were calculated. The result obtained are as followings; 1. The incidence rate per 1000 was 30 for both sexes, 39 for male and 22 for female, male being 1.8 times more frequent than female. Age adjusted incidences were not much different from the crude rates. Age group specific rate curve showed bimodal shape in both sexes, small peaks in preschool children and higher peaks in older ages. The incidence rate per 1000 people by area was highest in Jeon-bug province (57/1000) and the lowest in Daegu city(11/1000). 2. The place where the injuries occured were road in 46%, within the boundary of house in 25%, and working place in 12% The injuries and poisoning had occured more frequently during the months from March to August of the year than other months. 3. The relatively frequent injuries by its nature were contusion with intact skin surface (19%), fracture of upper limb (13%), open wound of head, neck and trunk (12%) and fracture of lower limb (11%) among males; contusion with intact skin surface (28%), sprains and strains of joints and adjacent muscle (14%), fracture of upper limb (10%) and fracture of lower limb (9%) among females. Higher incidence rate among males than females were fracture of skull (4.5 times), open wound and fractures of limbs ($2{\sim}3$ times). Age specific rate of injuries and poisoning by its nature showed increasing pattern by age in fractures of upper and lower limbs and sprains & strains of joints whereas the age group of 30's showed highest incidence in open wounds of upper limb. Fractures of radius and ulna in upper limb, fractures of tibia & fibula and ankle in lower limb were most frequent among fractures of upper and lower limbs. The frequent injuries among sprains and strains of joints and adjacent muscles were that of ankle, foot and back, and among open wound were that of head and fingers. 4. Relative frequency of injuries and poisoning by external causes showed following order : other accidents (25%), accidental falls (23%), motor vehicle accident (22%) and other road vehicle accident (14%) among males and accidental falls (37%), motor vehicle accident (24%) and other accident (18%) among females. The external causes revealing higher incidences among males than females, were other road vehicle accident (4.8 times), vehicle accident not elsewhere classifiable (4.4 times), accidental poisoning (4.4 times), accidents due to natural and environmental factors (2.8 times), and sucide & self-inflicted injuries (2.8 times). Age specific incidence by external causes for frequent injuries showed that incidence of other accident steadily increased from 10's till age 50's; motor vehicle traffic accident increased from age 20's and dropped after age 60's; on the other hand accidental fall increased strikingly by age. The most frequent external causes among motor vehicle traffic accidents was motor vehicle traffic accident involving collision with pedstrain (69%), pedal cycle accident (30%) and other road vehicle accident (71%) among other road vehicle accidents; falls on same level from slipping, tripping or standing (44%) and other falls from one level to another among accidental falls; accidents caused by machinary (32%) for male and striking against or struck accidentally by objects or person for female among other accidents. 5. Seventy nine percent of the injuries and poisonings were treated in general hospital or hospital/clinic. The duration of treatment ranged from a few days to 123 weeks; the majority(52%) took under 2 weeks, 36% for $3{\sim}8$ weeks and 4% over 21 weeks. 6. The accident resulted in full recovery of normal healthy state in 62%, residual functional defects in 21% and on process of treatment in 16%.

• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.2
• /
• pp.139-161
• /
• 2009

The idea of establishing an International Court of Air and Space Law (hereinafter referred to ICASL) is only my academic and practical opinion as first proposal in the global community. The establishment of the International Court of Air and Space Law can promote the speed and promote fairness of the trial in air and space law cases. The creation of an ICASL would lead to strengthening of the international cooperation deemed essential by the global community towards joint settlement in the transnational air and space cases, claims and would act as a catalyst for the efforts and solution on aircraft, satellite and space shuttle's accidents and cases and all manpower, information, trial and lawsuit to be centrally managed in an independent fashion to the benefit of global community. The aircraft, satellite and spacecraft's accidents attributes to the particular and different features between the road, railway and maritime's accidents. These aircraft, satellite and spacecraft's accidents have incurred many disputes between the victims and the air and space carriers in deciding on the limited or unlimited liability for compensation and the appraisal of damages caused by the aircraft's accidents, terror attack, satellite, space shuttle's accidents and space debris. This International Court of Air and Space Law could hear any claim growing out of both international air and space crash accidents and transnational accidents in which plaintiffs and defendants are from different nations. This alternative would eliminate the lack of uniformity of decisions under the air and space conventions, protocols and agreements. In addition, national courts would no longer have to apply their own choice of law analysis in choosing the applicable liability limits or un-limit for cases that do not fall under the air and space system. Thus, creation of an International Court of Air and Space Law would eliminate any disparity of damage awards among similarly situated passengers and shippers in nonmembers of air and space conventions, protocols, agreements and cases. Furthermore, I would like to explain the main items of the abovementioned Draft for the Convention or Statute of the International Court of Air and Space Law framed in comparison with the Statute of the International Court of Justice, the Statue of the International Tribunal for the Law of the Sea and the Statute of the International Criminal Court. First of all, in order to create the International Court of Air and Space Law, it is necessary for us to legislate a Draft for the Convention on the Establishment of the International Court of Air and Space Law. This Draft for the Convention must include the elected method of judges, term, duty and competence of judge, chambers, jurisdiction, hearing and judgment of the ICASL. The members of the Court shall be elected by the General Assembly and Council of the ICAO and by the General Assembly and Legal Committee of the UNCOPUOS from a list of persons nominated by the national groups in the six continent (the North American, South American, African, Oceania and Asian Continent) and two international organization such as ICAO and UNCOPUOS. The members of the Court shall be elected for nine years and may be re-elected as one time. However, I would like to propose a creation an International Court of Air and Space Law in extending jurisdiction to the International Court of Justice at the Hague to in order to decide the air and space convention‘s cases. My personal opinion is that if an International Court on Air and Space Law will be created in future, it will be settled quickly and reasonably the difficulty and complicated disputes, cases or lawsuit between the wrongdoer and victims and the injured person caused by aircraft, satellite, spacecraft's accidents or hijacker and terrorists etc. on account of deciding the standard of judgment by judges of that’s court. It is indeed a great necessary and desirable for us to make a new Draft for the Convention on a creation of the International Court of Air and Space Law to handle international air and space crash litigation. I shall propose to make a new brief Draft for the Convention on the Creation of an International Court of Air and Space Law in the near future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.19-29
• /
• 2022

The result of a questionnaire survey conducted on fishermen using coastal fish traps shows that fall accidents during trap dropping and pulling constitute the highest proportion of accidents at 42.1 %, whereas slipping accidents on the deck or stricture accidents to the body due to the trap winding device constitute 21.1 % each. In addition, 53.2 % of all surveyed subjects responded that trap pulling is the most dangerous task, followed by fish sorting 33.8 %, and trap dropping 9.1 %. As for the main items requested by fishermen for improving the trap winding device, 36.8 % indicated a method to easily lift the trap from the water to the work deck, and 31.6 % indicated a method to overcome the rope tension and prevent slip when pulling the trap to reduce the accidents. The small trap fishing vessel winding device proposed herein can increase the winding force by strengthening the rope contact area and friction coefficient via an appropriate contact angle between the driving roller of the winding device and the rope. When the contact angles between the driving roller and the rope are 1°, 5°, 9°, 14° and 19°, the rope tension showed a difference according to each contact angle. When the contact angle is 9°, the rope tension is the highest at 392.62 kgf. Based on these experimental results, a prototype winding device is manufactured, and 25 traps are installed on a rope with a total length of 100 m at 4 m intervals in the sea, and then the rope tension is measured during trap pulling. As a result, the rope tension increases rapidly at the initial stage of trap pulling and shows the highest value of 31.89 kgf, which subsequently decreases significantly. Therefore, it is appropriate to design the winding force of a small trap fishing vessel winding device based on the maximum tension value of the rope specified at the beginning of the trap pulling operation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.5
• /
• pp.1-12
• /
• 2023

This study evaluated the overturning stability of portable tripod ladders used for high-altitude work such as tree management and pruning work in landscaping construction and management. Portable tripod ladders, which are included in general mobile or portable ladders frequently used in industrial sites, are supported in a triangular support structure, not a 4-point support like common A-type Ladders. In addition, since the working height is more than twice that of a mobile or portable ladder, the possibility of an overturning accident that threatens the safety of workers with a fall accident is high. Therefore, based on the overturning stability test specified in ANSI-ASC A14.7 and EN 131-Part 7, which are related standards for about 130 types of portable tripod ladders sold and used in Korea. An equation to calculate each moment according to working height was derived. Then, each calculated moment was compared to evaluate the safety factor for overturning and stability. As a result of the overturning stability evaluation according to each standard, when the provisions of EN 131-Part 7 were applied, portable tripod ladders with 8 steps in the rear direction and 6 steps or more in the side direction were evaluated as unstable against overturning, but according to ANSI-ASC A14.7 regulations. It was evaluated that the stability against overturning was secured in all directions and number of steps.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.1
• /
• pp.21-26
• /
• 2014

Objectives: The purpose of this article is to analyze the incidence, demographic distribution, type, and etiology of mandible fractures that were treated by the Department of Oral and Maxillofacial Surgery in Kyung Hee University Dental Hospital from January 2002 to December 2012. Materials and Methods: This was a descriptive and analytic retrospective study that evaluated 735 patients that were treated for mandible fracture. Results: This study included 1,172 fractures in 735 patients. The ratio of male to female patients was 5.45 : 1; the maximum value was in patients between 20 and 29 years (38.1%) and the minimum in patients over 70 years old. The monthly distribution of facial fractures peaked in the fall and was lower during winter. No specific correlation was identified based on the annual fracture distribution. Among the 735 fracture patients, 1.59 fracture lines were observed per patient. The most frequent site was the symphysis, which accounted for a total of 431 fractures, followed by the angle (348), condyle (279), and body (95). The symphysis with angle was the most common site identified in combination with fracture and accounted for 22.4%, followed by symphysis with condyle (19.8%). The angle was the most frequent site of single fractures (20.8%). The major cause of injury was accidental trauma (43.4%), which was followed by other causes such as violence (33.9%), sports-related accidents (10.5%), and traffic accidents (10.1%). Fracture incidents correlated with alcohol consumption were reported between 10.0%-26.9% annually. Conclusion: Although mandible fracture pattern is similar to the previous researches, there is some changes in the etiologic factors.

• Journal of Society of Preventive Korean Medicine
• /
• v.14 no.3
• /
• pp.117-127
• /
• 2010

Objectives : The purpose of this study was to find out the characteristics of patients who admitted due to industrial accident and to promote the superiority of oriental medical treatment on the sequelae of industrial accident. Methods : We analyzed the medical charts of 51 inpatients in a local oriental medicine hospital. The patients had been hospitalized from May 1, 2003 to October 31, 2010. Results : 1. By gender, males accounted for 78.4%, while females 21.6%. By age, most incidences occurred in the forties(29.4%), fifties(23.5%) and thirties(19.6%) in order. 2. Most causes of accident was carelessness(27.5%) and fall down(21.6%) was the next. 3. With regard to the interval from occurrence of accidents to hospitalization, 20 cases(39.2%) were found to be hospitalized 31～90 days after the accidents, followed by 11 cases(21.6%) in 91～180 days and 7 cases(13.7%) in 181～360 days. 4. Most cases turned out to be injuries with 40 patients from Sequelae of intracerebral hemorrhage (23.5%) and Lumbar and other intervertebral disc disorders with radiculopathy(13.7%). The mean duration of hospitalization was $209.03{\pm}346.04$ days. Inpatients of Organic brain syndrome NOS numbered the longest stay($676{\pm}86.26$days), Sequelae of intracerebral hemorrhage recorded $541.91{\pm}541.83$ days hospitalized. 5. Most of inpatients were treated with acupuncture(100%), herbal medication(98.0%), oriental physiological therapy(82.3%), and moxibustion(76.4%). Conclusions : This article will help the researchers related to Oriental medicine establish basic source of Oriental medicine approach for inpatients due to industrial accident.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.4
• /
• pp.359-370
• /
• 2022

Despite continuous efforts to reduce on-site safety accidents, the construction industry remains a high-risk sector with a high rate of fatal accidents. Design for Safety(DFS), which manages safety risk factors at the design stage, is being used as a method to lower the construction safety accident rate. However, due to limited knowledge, designers are unaware of the design-results risks during the different of the project lifecycle, including construction, operation, and maintenance. Effective DFS can be conducted if the designer understands the effect of the building shape on the safety accident rate and corresponding safety management cost(SMC). The cost of safety facilities such as fall prevention nets and safety fences will vary depending on the shape of the building. This study analyzes the outer perimeter length's impact on SMC. Following the data collection from 21 projects for this study, an analysis was conducted using the independent variables of the building perimeter(BP), building shape factor(BSF), and building area(BA), the dependent variable of SMC. The correlation R2 was found to be 0.876, 0.801 and 0.792 between the BP and SMC, BSF and SMC, BA and SMC, respectively, indicating that these factors were closely related.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.3
• /
• pp.39-46
• /
• 2016

Loss of postural stability can possibly lead to slip and fall accidents in the number of workplaces and everyday life. This study was aimed to examine the effects of whole body fatigue and partially limited visual field on the ability of maintaining postural balance during quiet standing. A group of twelve healthy male subjects participated in the experiment. Before and after experiencing the whole body fatigue induced by bicycling exercises, the position coordinates of subject's center of pressure (COP) were obtained under the two levels of visual field condition (i.e., open visual field and limited visual field). Four levels of the whole body fatigue examined were rest, 300watt, 600watt, and 900watt. Position coordinates of COPs measured on a force plate were then converted into the total length of postural sway path in both the medio-lateral (ML) direction and the anterior-posterior (AP) direction. Two-way ANOVA result showed that the length of sway path in the AP direction became significantly larger as the whole body fatigue accumulated. Post-hoc test revealed statistically significant differences between rest and 900watt and between 300watt and 900watt. The significant increase of the sway length was also found when the visual field was partially obstructed by the boxes. In the ML direction, however, there was no statistically significant difference of the postural sway in both the AP and ML directions. The results imply that the ability of maintaining postural stability can be reduced significantly due to such tasks along with whole body fatigue. The postural balance can also be impaired by the limited visual field.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.2
• /
• pp.654-670
• /
• 2020

Workers at construction sites are easily exposed to many dangers and accidents involving falls, tripping, and missteps on stairs. However, researches on construction site monitoring system to prevent work-related injuries are still insufficient. The purpose of this study was to develop a wearable textile pressure insole sensor and examine its effectiveness in managing the real-time safety of construction workers. The sensor was designed based on the principles of parallel capacitance measurement using conductive textile and the monitoring system was developed by C# language. Three separate experiments were carried out for performance evaluation of the proposed sensor: (1) varying the distance between two capacitance plates to examine changes in capacitance charges, (2) repeatedly applying 1 N of pressure for 5,000 times to evaluate consistency, and (3) gradually increasing force by 1 N (from 1 N to 46 N) to test the linearity of the sensor value. Five subjects participated in our pilot test, which examined whether ascending and descending the stairs can be distinguished by our sensor and by weka assessment tool using k-NN algorithm. The 10-fold cross-validation method was used for analysis and the results of accuracy in identifying stair ascending and descending were 87.2% and 90.9%, respectively. By applying our sensor, the type of activity, weight-shifting patterns for balance control, and plantar pressure distribution for postural changes of the construction workers can be detected. The results of this study can be the basis for future sensor-based monitoring device development studies and fall prediction researches for construction workers.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.1
• /
• pp.35-39
• /
• 1975

The acid treatment hatching method has been used practically for about 60 years and a number of investigators have studied about the artificial hatching for silkworm e99s, but the basic theory about the acid treatment hatching is not clarified yet. It is no exaggeration to say that the accidents of non hatching is continued ceaselessly in the silkworm egg by hydrochloric acid treatment. It is believed that the accident is due to the adulterants in HCl lather than inattention of acid treatment. Therefore, the authors mixed hydrochloric acid (analytical grade) with or added it to chemical ingredients which are possible to be included in the process of hydrochloric acid production, and treated it to summer and fall silkworm egg. The metalic adulterants such as iron, mercury, lead and arsenic are appeared not to be worried, but damage of SO$_3$ and free chlorine is seemed to lie considerable. Therefore, before acid treatment for hatching hydrochloric acid was warmed to 50$^{\circ}C$ with shaking to evaporate several injurious gases, by whick the damage due to use of hydrochloric acid for acid treatment hatching is prevented considerably. In conclusion, it is recommended to pretest bioassay with every HCl samples before artificial hatching of silkworm egg.