• Journal of the Korean Society of Costume
• /
• v.66 no.4
• /
• pp.45-60
• /
• 2016

Elderly women have a high risk of falling down in their daily lives. The purpose of this study is to develop protective pants for elderly women, which will mitigate the impact of falls, and play a major role in reducing injuries. The two types of design were proposed for development of protective pants by selecting pad insertion point and inserting lining for keeping pad in place through the checklist to investigate from the interviews with the medical workers and the investigation of the user requirement. Design A has protective pads in the hip, hip joint, and knee, while design B has protective pads in the hip and hip joint area. For the impact absorbing material, CR (chloroprene rubber) foam was selected for its flexibility, lightness, and impact absorbing capacity, and its pad shapes were designed to produce much flexibility in consideration of the activity and human body fitness of the wearers. Three kinds of pad types, which are the cut type, the porous type, and the honeycomb type, were proposed, and were manufactured to fit into the protective parts according to their design types.

• Research in Plant Disease
• /
• v.10 no.1
• /
• pp.8-12
• /
• 2004

The diseased ginseng plants, their trunks fall down anil roots rot, were observed in ginseng cultivation field at Bongwha, Kyungbuk. Inoculation of the bacterium isolated from root rot lesion induced a range of symptoms on leaves, trunks and roots; The bacterium caused wilting with chlorosis and black discoloration on leaves, empty of inside trunks and rot on roots. The bacterium was identified as Serritia liquefaciens based on the morphologcal and physiological characteristics. This is the first report in Korea on roots rot of ginseng occurred by S. liquefaciens.

• Journal of Trauma and Injury
• /
• v.30 no.4
• /
• pp.231-234
• /
• 2017

Extrahepatic bile duct injury is commonly associated with hepatic, duodenal, or pancreatic injuries, and isolated extrahepatic bile duct injury is rare. We report a patient who presented with an isolated extrahepatic bile duct injury after blunt trauma. A 50-year-old man was referred to our hospital after having suffered a fall down injury. His laboratory findings showed hyperbiliribinemia with elevated aspartate aminotransferase and alanine aminotransferase level. Initial abdominal computed tomography (CT) showed a mild degree of hemoperitoneum without evidence of abdominal solid organ injury. On the 3rd day of hospitalization, the patient complained of dyspnea and severe abdominal discomfort. Follow-up abdominal CT showed no significant interval change. Owing to the patient's condition, Emergency laparotomy revealed a large amount of bile-containing fluid collection and about 1 cm in size laceration on the left lateral side of the common hepatic duct. Primary repair of the injured bile duct with T-tube insertion was performed On postoperative day (POD) 30, endoscopic retrograde cholangiopancreatography showed minimal bile leakage and endoscopic sphincteroplasty and endoscopic retrograde biliary drainage were performed. On POD 61, the T-tube was removed and the patient was discharged.

• Journal of the Korean Society of Safety
• /
• v.29 no.2
• /
• pp.1-6
• /
• 2014

In this paper, safety certification products and safety condition of small transformer is analyzed in industries field and educational facilities. In transformer of 50places, absolute majority is step down transformer to measure of instrument. Most transformers were below 5kVA and 1~3kVA capacity was the mainstream. In industries field, 5 transformers were found without safety certification according to the Electrical Appliances Safety Control Act as cheap product prefer and lack of safety consciousness. Mark & number, voltage, date of manufacture of safety certification must show item of certification. However date of manufacture showed in product of 18%, 9places. As result of thermal imaging camera, running temperature of transformer was showed in below of target temperature. However as a narrow space of transformer and wall, power cable was touched on a ventilating flue in transformer. It was simple carelessness case that surface fouling and temperature ageing of transformer accelerate. Power poor connection, neglect of transformer in production equipment, fall damage by setup incongruity and ground omission were found in case of illogicality item of transformer.

• Herbal Formula Science
• /
• v.20 no.2
• /
• pp.165-176
• /
• 2012

In pathologically analyzing, 'Qi(氣)' is fall downed 'Zheng-Qi(正氣; Base energy of human body)' or 'Wai-Gan-Xie-Qi(外感邪氣; poisoned energy from outside of human body)'. And all extroverted symptoms from this 'Qi(氣)' is 'Shang-Chong(上衝)'. Also this symptom's basic mechanism is deficiency of 'Zhong-yang(中陽; basic active energy acting pivot)' by non-proper 'Xia-fa(下法; treatment way getting out focus to down side)' at early days of 'Tai-Yang-bing (太陽病; Primary stage symptoms when the cold energy of the outside tresspasses the external layer of body)'. And comparing herbs in medicines for treating 'Shang-Chong(上衝)' in Shang han lun with Japanese in Shang-han medical practitioner's view, there is 'Ping-Chong(平衝; Supress out bursting energy)''s effect when use 'Gui-zhi(桂枝; Cinnamomum cassia loureirii zeylanuicum)' for mass dosage. Based on these, 'Qi-Shang-Chong(氣上衝)' means all of the symptom's aspects which called 'Yang(陽)''s aspect that is extrovesity, dynamic and imminent by results of the experiment about Cinnamaldehyde which are the main ingredients of 'Gui-zhi(桂枝; Cinnamomum cassia loureirii zeylanuicum)' and clinical data of 'Gui-zhi-tang(桂枝湯)'.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4E
• /
• pp.28-34
• /
• 1998

In most switching system, the processing unit is designed to work efficiently even at relatively high loads, but when the offered traffic exceeds a particular level, the rate of completed calls can fall drastically. A single call handled by the switching system consists of a sequence of events or messages that has to be processed by the control unit. The control unit is not only incapable of handling all of the offered calls, but also its call handling capability can drop as the offered load increases. The real time available for call processing is a critical resource that requires careful management. Therefore, the overloading of this resource must be detected by a subscriber in the from of a dial tone delay or an uncompleted call which is either blocked or mishandled. The subscriber may respond by either dialing prematurely or by re-attempting a call. This action can further escalate the processors load, which is spent for uncompleted calls. Unless a proper control is used, the switching system can finally break down. In this paper, we paper, we propose a fuzzy overload detection and control method for switching systems, which can by generating fuzzy rules via fuzzy aggregation networks. Simulation results involving a switching system is given.

• Journal of Advanced Navigation Technology
• /
• v.18 no.6
• /
• pp.633-639
• /
• 2014

Recently the study about a smart health care which is combined IT with BT to provide a variety of health care services are being actively investigated. In order to provide the best possible emergency medical services in a short period of time, it is necessary that the rapid emergency measures in the event of an emergency essential. In this paper, we propose an emergency medical service platform to take effective first aid to person who has a NFC tag or NFC-enabled mobile smart phones in an accident. Using NFC, it is possible to help without physical contact to the patient unconscious to emergency incidents such as falling down in everyday life. In this paper, we design and implement an mobile emergency medical system that can deliver first aid information ask for help in case of emergency.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.71-74
• /
• 2008

The main object of this paper is concentrated on distance control of two robot arms of a humanoid using Fuzzy Logic Controller (FLC) for handling a common object. Serial Link Robot arms are widely used in most significantly in Humanoids serving for older people and also in various industrial applications. A method is proposed here that separates the interconnections between two robot arms so that the resulting model of two arms is decomposed into fuzzy logic based controller. The distance between two end effectors is always kept equal to that of the diameter of an object to be handled, so that the object would not fall down. Mathematical model of this system was obtained to simulate the behavior of serial robotic arms in close loop control before using fuzzy logic controller. Lagrangian equation of motion has been used to obtain the appropriate mathematical model of Robotic arms. The results are shown to provide some improvement over those obtained by more conventional means.

• Journal of Chest Surgery
• /
• v.15 no.4
• /
• pp.414-421
• /
• 1982

200 patients admitted to the Chest Surgery Department of Jeonbug National University Hospital from January, 1974 to December, 1981 were analyzed clinically. The ratio of male to female was 7: 1, which showed male predominance. Distribution of patients according to age disclosed that over half [62%] of the patients was social age between 20 and 49 years. The most common cause of chest trauma was traffic accident [39%], and the next were stab wound, fall down [17.5%], and hit [8.5%] in decreasing order. Common lesions due to chest trauma were as follows; rib fracture [51%], hemopneumothorax, hemothorax, and pneumothorax in decreasing number. The most common cause of rib fracture was traffic accident [50%] and the associated organ injuries were long bone fracture, head injury, spine and pelvic bone fracture, spleen rupture, and liver laceration. Hemothorax, pneumothorax, and hemopneumothorax were treated with insertion of thoracic catheter in 90 cases, pure thoracentesis in 11 cases, and emergency thoracotomy in 11 cases. In flail chest, 6 patients were treated by intramedullary insertion of Kirschner`s wire and the results were good. The incidence of complication was 17%, including atelectasis [11 cases], pyothorax, fibrothorax, pneumonia, and acute respiratory failure. Four patients were died [2%], and the causes were acute respiratory failure in 2 cases, spinal cord injury in one case and head injury in one case.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.457-461
• /
• 2006

디지털 융합(Digital Convergence)이 모든 분야에서 급속히 전개됨으로서 기업들은 전략적으로 IT를 전사적으로 활용하면서 글로벌 시대의 경쟁 기업들에 비해 보다 빠른 신기술 습득을 적용함으로써 생존 경쟁의 우위 확보 전략이 점차 강화되고 있는 실정이다. IT 기술의 발전 방향도 전사적 데이터 및 비즈니스 프로세스의 통합을 통하여 전 영역에 걸쳐 신기술을 이용하여 표준화와 통합화로 진보되고 있다. 그러나 글로벌 경쟁체제인 세계화가 가속화 되고 있는 기업들의 품질 경영 활동이 실시간으로 처리되지 못함에 따라 각종 경영혁신 활동에 대한 통제/관리와 비용 절감 노력이 기업 역량 강화에 유기적인 효과를 거두지 못하고 있는 실정이다. 따라서 본 연구에서 일반적으로 제조 부문이나 사무간접(관리)부문에서도 적용 가능한 6시그마 추진 방법론을 기반으로 목표관리 및 방침관리인 Top-Down 프로세스인 순공학 품질경영 활동인 뿐만 아니라, 현장의 창의적인 품질경영 활동을 통한 Bottom-Up 프로세스인 역공학 품질경영 활동에서도 적용 가능한 실시간 동시공학적인 품질경영 활동의 프레임워크를 설계하도록 한다. 또한 가치 흐름 분석을 통해 낭비 요인을 철저하게 제거하고, 프로세스의 흐름을 최적화하여 원하는 품질경영 활동이 프로젝트로 발전하여 기업경영에 실시간으로 반영될 수 있는 전사적 통합 품질경영 활동 시스템을 제안하도록 한다.