• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.456-461
• /
• 2003

기존선 속도 향상 및 병목현상 해소와 안전운행을 위해 국내 철도 현황의 주요 분야를 검토한 후, 국내 17년동안 사용으로 안전성이 검증된 신호기술을 바탕으로 국내 실정에 적합하며, 기존의 ATS 장치를 개선한 정보형 ATS(ATPS)를 개발하여 이를 제시하였다. 본 시스템은 운행 중인 열차의 제동특성을 고려하여 구간별 제한속도를 상향 조정하여 운행 효율을 증가 시킬 수 있다. 또, 안전성과 신뢰성 보장을 위해 Fail-Safe 및 이중계(redundancy)로 제작 하였고, 기존의 차상자와 발진기를 통합함으로써 Q factor를 개선하여 무응동 방지 및 기준 응동시간 비교방식을 통해 오동작을 개선하였다. 그리고, 정보기록 장치를 추가함으로써 이미 기록되어있는 차량정보데이터와 지상정보데이터를 연산하여 운전정보를 제공하고 기록한다. 또한, 이 운전정보는 정보 분석용 PC 및 프로그램에 의해 쉽게 분석, 관리가 가능하다. 무엇보다도 기존 ATS 구간과의 겸용사용으로 영업 운전시 안전한 연속 운행 보장 및 지상설비 개량 없이 안전을 확보할 수 있다. 다양한 종류의 동력차에 설치, 인터페이스 및 지상설비 개량이 용이하다. 향후 틸팅 시스템과 연계하여 틸팅 제어/감시 신호를 제공하는 기능을 갖는다.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.3
• /
• pp.1-8
• /
• 2011

The overall goal of a safety based railroad system is either to eliminate hazards in designing or to minimize the possibility of it. In order to indicate system safety or low risk although it may not be possible to achieve zero risk conditions, first, it shall ensure that any disasters would occur due to system operation because the prescribed specifications are properly fulfilled and there are no failures of any kind. Second, the risk of faults or failures leading to a mishap must be eliminated or minimized by using fault-tolerance or fail-safe procedures. This paper will attempt to summarize the personal and social risk criterion at widely scattered points, presently used as a safety approach in all over EU, in order to establish the step by step procedures of the detailed standard for railway facilities. In addition, we present the new safety analysis method using the SIL-based evaluation standard and the Reachability Graph of the Petri Net.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.1
• /
• pp.15-25
• /
• 2020

This paper presents a longitudinal control algorithm for ensuring takeover time of autonomous vehicle using V2V communication. In the autonomous driving of more than level 3, autonomous systems should control the vehicles by itself partially. However if the driver's intervention is required for functional safety, the driver should take over the control reasonably. Autonomous driving system has to be designed so that drivers can take over the control from autonomous vehicle reasonably for driving safety. In this study, control algorithm considering takeover time has been developed based on computation method of takeover time. Takeover time is analysed by conditions of longitudinal velocity of preceding vehicle in time-velocity plane. In addition, desired clearance is derived based on takeover time. The performance evaluation of the proposed algorithm in this study was conducted using 3D vehicle model with actual driving data in Matlab/Simulink environment. The results of the performance evaluation show that the longitudinal control algorithm can control while securing takeover time reasonably.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.1-8
• /
• 2006

The Steer-By-Wire(SBW) system replaces complex mechanical linkages of the current steering system with electric motors, sensors, and electronic control units. However, the SBW system should guarantee its safety and reliability before commercialization, and therefore, a reliable and robust fault-tolerant technology has to be implemented. This paper proposes a fault-tolerant control algorithm for the SBW system. Based on careful analysis on propagation effects of sensor faults, a reliable fault-tolerant control strategy has been developed. The fault-tolerant controller consists of a fault detection part that monitors and detects faults in the steering wheel and road wheel sensors, and a reconfiguration part that switches to normal sensor signal based on fault detection information. It has been demonstrated by simulation that the proposed algorithm detects sensor faults accurately and enables reliable steering control under various dynamic fault situations.

• Journal of the korean Society of Automotive Engineers
• /
• v.8 no.1
• /
• pp.40-51
• /
• 1986

A study has been made of the corrosion fatigue of high strength low alloy steel in 3.5% NaCl solution under tension stress for solution temperature being 25.deg. C, 55.deg. C and 85 .deg. C. The main results obtained are as follows; 1) The corrosion fatigue crack growth rate curve could be divided into the First Region, the Second Region and the Third Region. 2) The corrosion fatigue crack growth rates in the First Region and the Second Region were Arrhenius temperature-dependent in this test range. The apparent activation energies for the corrosion fatigue cack growth rate were found to be 2000cal/mol in the First Region and 3700 cal/mol in the Second Region. 3) Hematite (Fe$_{2}$O$_{3}$) as the hexahedral crystal and magnetite (Fe$_{3}$O$_{4}$) as the octahedral crystal were observed in the corrosion products on the corrosion fatigue fracture surface at 85.deg. C and the anode fusion seem to be generated in the crack tip region at high temperature. 4) The complex environment effect ratio which was defined by the ratio of fatigue crack growth rate in corrosion environment to that in air might be considered not only a criterion estimating the effect of environment quantitatively but also an important parameter in the selection of the design stress for the fail safe design. The complex environment effect was not greater than ten in this test.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.3
• /
• pp.1-9
• /
• 2021

Crane is an important equipment for the transport of heavy goods in industrial sites, but it is also known as one of the most fatal machines. In order to reduce crane accidents, it is necessary to minimize human errors during crane operations. To achieve this, ergonomic design principles are recommended to be reflected from the crane design stage. The study analyzed the safety certification standards for crane that should be fulfilled at the crane design and manufacturing stage. This study selected five representative ergonomic design principles (feedback, compatibility, consistency, full-proof, and fail-safe) by surveying heuristic evaluation principles that are widely used for usability evaluation in early design stage. Next, the principles were applied to the safety certification standards to identify insufficient clauses. This study identified 12 insufficient clauses out of 119 in the current safety certification standards for crane and discussed their improvement directions to comply the ergonomic principles. The analysis results of this study can help of improving the safety certification standards and the method used in this study can also be applied to identify insufficient clauses in the safety certification standards for other industrial machines such as press machine and lift.

• Women's Health Nursing
• /
• v.27 no.3
• /
• pp.180-195
• /
• 2021

Purpose: This study aimed to summarize the current evidence on the effects of nonpharmacological interventions on psychological health outcomes for women with high-risk pregnancies due to conditions such as preeclampsia, gestational diabetes, or preterm labor. Methods: The following databases were searched from January 2000 to December 2020: PubMed, Ovid Embase, CINAHL, Web of Science, DBpia, RISS, and KISS. Two investigators independently reviewed and selected articles according to the inclusion/exclusion criteria. RoB 2 and the ROBINS-I checklist were used to evaluate study quality. Results: Twenty-nine studies with a combined total of 1,806 pregnant women were included in the systematic review and meta-analysis. Psychological health improvements were found in women with preeclampsia (Hedges' g=-0.67; 95% confidence interval [CI], -0.91 to -0.44), gestational diabetes (Hedges' g=-0.38; 95% CI, -0.54 to -0.12), and preterm labor (Hedges' g=-0.73; 95% CI, -1.00 to -0.46). The funnel plot was slightly asymmetrical, but the fail-safe N value and the trim-and-fill method showed no publication bias. Conclusion: Nonpharmacological interventions for women with high-risk pregnancies due to conditions such as preeclampsia, gestational diabetes, and preterm labor can improve psychological parameters such as anxiety, stress, and depression. Nurses can play a pivotal role in the nursing management of pregnant women with high-risk conditions and apply various types of nonpharmacological interventions to meet their needs in uncertain and anxious times during pregnancy.

• International Journal of High-Rise Buildings
• /
• v.8 no.2
• /
• pp.117-123
• /
• 2019

Tall buildings are prone to wind-induced vibrations due to their slenderness whereby peak structural accelerations may be higher than the recommended maximum value. The common countermeasure is the installation of a tuned mass damper (TMD) near the highest occupied floor. Due to the extremely large modal mass of tall buildings and because of the narrow to broad band type of wind excitation the TMD mass may become inacceptable large - in extreme cases up to 2000 metric tons. It is therefore a need to develop more efficient TMD concepts which provide the same damping to the building but with reduced mass. The adaptive TMD concept described in this paper represents a solution to this problem. Frequency and damping of the adaptive TMD are controlled in real-time by semi-active oil dampers according to the actual structural acceleration. The resulting enhanced TMD efficiency allows reducing its mass by up to 20% compared to the classical passive TMD. The adaptive TMD system is fully fail-safe thanks to a smart valve system of the semi-active oil dampers. In contrast to active TMD solutions the adaptive TMD is unconditionally stable and its power consumption on the order of 1 kW is negligible small as controllable oil dampers are semi-active devices. The adaptive TMD with reduced mass, stable behavior and lowest power consumption is therefore a preferable and cost saving damping tool for tall buildings.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.2
• /
• pp.11-16
• /
• 2019

This paper suggests an algorithm for detecting fault of longitudinal controller in autonomous vehicles. Guaranteeing safety in fault situation is essential because electronic devices in vehicle are dependent each other. Several methods like alarm to driver, ceding control to driver, and emergency stop are considered to cope with fault. This research investigates the fault monitoring process in fail-safe system, for controller which is responsible for accelerating and decelerating control in vehicle. Residual is computed using desired acceleration control command and actual acceleration, and detection of its abnormal increase leads to the decision that system has fault. Before computing residual for controller, health monitoring process of acceleration signal is performed using hardware and analytic redundancy. In fault monitoring process for controller, a process model which is fitted using driving data is considered to improve the performance. This algorithm is simulated via MATLAB tool to verify performance.

• Animal Bioscience
• /
• v.37 no.7
• /
• pp.1185-1195
• /
• 2024

Objective: This meta-analysis aimed to evaluate the impact of wilted and unwilted silage on various parameters, such as nutrient content, fermentation quality, bacterial populations, and digestibility. Methods: Thirty-six studies from Scopus were included in the database and analyzed using a random effects model in OpenMEE software. The studies were grouped into two categories: wilting silage (experiment group) and non-wilting silage (control group). Publication bias was assessed using a fail-safe number. Results: The results showed that wilting before ensiling significantly increased the levels of dry matter, water-soluble carbohydrates, neutral detergent fiber, and acid detergent fiber, compared to non-wilting silage (p<0.05). However, wilting significantly decreased dry matter losses, lactic acid, acetic acid, butyric acid, and ammonia levels (p<0.05). The pH, crude protein, and ash contents remained unaffected by the wilting process. Additionally, the meta-analysis revealed no significant differences in bacterial populations, including lactic acid bacteria, yeast, and aerobic bacteria, or in vitro dry matter digestibility between the two groups (p>0.05). Conclusion: Wilting before ensiling significantly improved silage quality by increasing dry matter and water-soluble carbohydrates, as well as reducing dry matter losses, butyric acid, and ammonia. Importantly, wilting did not have a significant impact on pH, crude protein, or in vitro dry matter digestibility.