• 한국의류학회지
• /
• 제33권6호
• /
• pp.929-937
• /
• 2009

본 논문은 성적소구의 패션 POP 광고맥락에서 노출유형과 할인율 메시지 사용에 따른 커뮤니케이션 효과의 차이를 규명하는 데에 목적이 있다. 이를 위해 성적소구유형(완전노출, 반노출, 밀착, 비노출)과 할인율 메시지(유/무)를 집단간 조건으로 상정하고, $4\times2$ 요인설계로 각 조건에 35명씩 무작위로 할당하여 총 280명의 남녀 대학생을 대상으로 실험을 실시하였다. 그 결과, 성적소구 패션 POP 광고의 노출유형에 따라 광고감정, 광고태도, 브랜드 태도에 있어 유의한 차이가 있는 것으로 나타난 반면, 할인율 메시지 적용 유무에 따라서는 유의한 차이가 없는 것으로 나타났다. 또한, 광고인지에서 노출유형과 할인율 메시지 사용에 따른 상호작용 효과가 있는 것으로 나타났다. 본 연구는 실제 패션매장의 매출액 제고를 위한 성적소구 패션 POP 광고의 유형과 성적소구 패션 POP 광고에서의 할인율 메시지의 적용 여부에 대해 전략적 시사점을 제공하고 있다.

• 한국축산식품학회지
• /
• 제30권1호
• /
• pp.66-72
• /
• 2010

Pediococcus pentosaceus SA131 was isolated from jeotgal, is the bacteriocin producer against bovine mastitis pathogens, Streptococcus uberis E290, Enterococcus gallinarum E362, and Staphylococcus epidermidis ATCC 12228. The medium composition for pediocin SA131 production by P. pentosaceus SA131 was optimized using response surface methodology. Component of medium was studied as carbon source (glucose, fructose, lactose, glycerol, sucrose, maltose, and mannitol), nitrogen source (beef extract, yeast extract, peptone, malt extract, and tryptone), mineral and surfactant ($MgSO_4$, $KH_2PO_4$, $(NH_4)_2SO_4$, $MnSO_4$, NaCl, sodium acetate, and Tween 80). Through one factor-at-a-time experiment, glucose, fructose, yeast extract, malt extract, NaCl, $MgSO_4$, and Tween 80 were determined as the good ingredient. The effects of major factors for pediocin SA131 production were investigated by two-level fractional factorial designs (FFD). By a $2^4$ FFD, fructose, yeast extract, and $MnSO_4$ were found to be the important factors for the bacteriocin production. Subsequently, a $2^3$ central composite design (CCD) was adopted to derive a statistical model for optimizing the composition of the fermentation medium. The estimated optimum composition for the production of pediocin SA131 by P. pentosaceus SA131 was as follows; 0.13% fructose, 1% glucose, 1.8% yeast extract, 2.58% $MnSO_4$, 0.2% NaCl, and 0.2% Tween 80. The pediocin production under optimized medium was increased to 1,000 AU/mL, compared to the 400 AU/mL in MRS medium.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권12호
• /
• pp.1726-1733
• /
• 2012

The effect of genotype, fibre level and fibre source on gut morphology, environment and microflora was studied using 18 Mong Cai (MC) and 18 Landrace${\times}$Yorkshire (LY) pigs, aged around 60 d. The diets were based on maize, rice bran, soybean meal, fish meal and soybean oil, and cassava residue (CR) or brewer's grain (BG) as fibrous ingredient sources in the high-fibre diets (HF). A low-fibre diet (LF), containing around 200 g NDF/kg dry matter (DM), was formulated without CR and BG as feed ingredients. The HF diets (HF-CR and HF-BG) were formulated to contain around 270 g NDF/kg DM. The experiment was arranged according to a $2{\times}3$ factorial completely randomized design with six replications, and lasted 30 d. Crypt density in ileum was lowest (p<0.05) and villus height in jejunum and ileum were the greatest (p<0.05) in pigs fed diet HF-BG. Villus width in ileum was greatest in pigs fed diets HF-CR and HF-BG (p<0.05). Lactic acid bacteria (LAB) counts in stomach were greatest (p<0.05) and E. coli counts in ileum and colon were lowest (p<0.05) in pigs fed diet HF-CR. The concentration of total organic acids in ileum, caecum and colon were greatest (p<0.05), and pH in ileum and colon were lowest (p<0.05) in pigs fed diet HF-CR. Crypt density in ileum was lowest, and villus height in ileum and villus width in jejunum and ileum was greatest in LY pigs (p<0.05). LAB counts in stomach and ileum were greatest, and E. coli counts in ileum were lowest in MC pigs (p<0.05). The concentration of total organic acids in ileum, caecum and colon were greatest (p<0.05) and pH lowest (p<0.05) in MC pigs.

• 품질경영학회지
• /
• 제46권3호
• /
• pp.651-658
• /
• 2018

Purpose: The algorithm described in Lim(1998) is available to determine the sample size directly given specified significance level, power and signal-to-noise ratio. We research on the efficient determination of the sample size by visual methods. Methods: We propose three graphs for investigating the mutual relationship between the sample size r, power $1-{\beta}$ and the detectable signal-to-noise ratio ${\Delta}$. First graph shows the relationship between ${\Delta}$ and $1-{\beta}$ for the given r and it can be checked whether the power is sufficient enough. Second graph shows the relationship between r and ${\Delta}$ for the given power $1-{\beta}$. Third graph shows the relationship between r and $1-{\beta}$ for the given ${\Delta}$. It can be checked that which effects are sensitive to the efficient sample size by investigating those graphs. Results: In factorial design, randomized block design and the split plot design how to determine the sample size directly given specified significance level, power and signal-to-noise ratio is programmed by using R. A experiment to study the split plot design in Hicks(1982) is used as an example. We compare the sample sizes calculated by randomized block design with those by split plot design. By using graphs, we can check the possibility of reducing the sample size efficiently. Conclusion: The proposed visual methods can help an engineer to make a proper plan to reduce the sample size.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1845-1848
• /
• 2005

The automatic $CO_2$ welding is a manufacturing process to produce high quality joints for metal and it could provide a capability of full automation to enhance productivity. Despite the widespread use in the various manufacturing industries, the full automation of the robotic $CO_2$ welding has not yet been achieved partly because the mathematical model for the process parameters of a given welding task is not fully understood and quantified. Several mathematical models to control welding quality, productivity, microstructure and weld properties in arc welding processes have been studied. However, it is not an easy task to apply them to the various practical situations because the relationship between the process parameters and the bead geometry is non-linear and also they are usually dependent on the specific experimental results. Practically, it is difficult, but important to know how to establish a mathematical model that can predict the result of the actual welding process and how to select the optimum welding condition under a certain constraint. In this research, an attempt has been made to develop an intelligent algorithm to predict the weld geometry (top-bead width, top-bead height, back-bead width and back-bead height) as a function of key process parameters in the robotic $CO_2$welding. A sensitivity analysis has been conducted and compared the relative impact of three process parameters on bead geometry in order to verify the measurement errors on the values of the uncertainty in estimated parameters.

• 한국잡초학회지
• /
• 제32권1호
• /
• pp.17-24
• /
• 2012

The study was conducted to investigate the effect of weed interference and starter fertilizer on subsequent soybean seed quality at the Agricultural Research Farm and Laboratory of Razi University, Kermanshah, Iran. Two factorial experiment was laid-outon a randomized complete block design with four replications. First factor was starter fertilizer levels (0 and 25 kg $ha^{-1}$) applied in the forms of monoammonium phosphate, the second factor was different weed interference periods consisted of five initial weed-free periods (in which, plots were kept free of weeds for 0, 15, 30, 45 and 60 days after crop emergence (DAE) and then weeds were allowed to grow until harvest) and five initial weed-infested periods (in which, weeds were allowed to grow for 0, 15, 30, 45 and 60DAE, after which the plots were kept free of weeds until harvest). Full season weedy condition reduced 100-seed weight, seed germination percentage and seedling dry weight by 25.9, 13.3 and 22.5%, respectively and increased mean germination time and seed electrical conductivity by 55.8 and 24.3%, respectively as compared with full season weed-free control. However, the traits under study were not significantly influenced when field was kept free of weeds for at least 45 DAE (R1) or weedy condition was continued for less than 30 DAE (V8). There was a significant and negative correlation between weed biomass and seed weight (r = -0.93), so that when weed free condition was less than 45 DAE or weed infested period was continued for at least 30 DAE, soybean plants produced wrinkled and underdeveloped seeds with lower weights and qualities. Moreover, soybean seed quality reduction due to weed interference was more evident when starter fertilizer was applied and weeds interfered with soybean from the beginning of the growing season. Information from the present study is beneficial in soybean seed production systems and where farmers use the harvested seeds for the following planting.

• 대한인간공학회지
• /
• 제30권4호
• /
• pp.551-562
• /
• 2011

Objective: We proposed an effective 3D menu manipulation alternative with a usability test. This was performed in a 3D environment with 3D menu and control manipulation methods. Background: As 3D stereoscopic displays became generalized, various 3D applications were being used not just movies, games, but also mobile contents and advertisements. However, when a user interface was designed in a 3D environment, it was lacked that a clear standard and result of an efficiency and usability as like a 2D environment. Method: We implemented 9 kinds of 3D menu types based on 3D menu hierarchies, menu layouts and dimensions. And we extracted 3 representative control types in a 3D environment. We performed usability evaluation with full factorial design for 27 menu alternatives with 2 types of menu manipulation tasks. In this condition, we measured the performance time, subjective discomfort and eye-fatigue. Results: A control type had the significant effect, and the effect of menu types had the different result depending on given tasks. Conclusion: This experiment showed the interaction of menu and control types depended on 3D menu manipulation tasks were significant in a 3D user interface design. Therefore, as a purpose of a 3D menu manipulation task, 3D menu types and control types were should be considered. Application: We supposed this result was should be applied in a 3D menu contents design.

• Transactions on Electrical and Electronic Materials
• /
• 제12권2호
• /
• pp.56-59
• /
• 2011

The characterization of the chemical mechanical polishing (CMP) process for undensified phophosilicate glass (PSG) film is reported using design of experiments (DOE). DOE has been used by experimenters to understand the relationship between the input variables and responses of interest in a simple and efficient way, and it typically is beneficial for determining the appropriatesize of experiments with multiple process variables and making statistical inferences for the responses of interest. The equipment controllable parameters used to operate the machine consist of the down force of the wafer carrier, pressure on the back side wafer, table and spindle speeds (SS), slurry flow (SF) rate, pad condition, etc. None of these are independent ofeach other and, thus, the interaction between the parameters also needs to be understoodfor improved process characterization in CMP. In this study, we selected the five controllable equipment parameters the most recommendedby process engineers, viz. the down force (DF), back pressure (BP), table speed (TS), SS, and SF, for the characterization of the CMP process with respect to the material removal rate and film uniformity in percentage terms. The polished material is undensified PSG which is widely used for the plananization of multi-layered metal interconnects. By statistical modeling and the analysis of the metrology data acquired from a series of $2^{5-1}$ fractional factorial designs with two center points, we showed that the DF, BP and TS have the greatest effect on both the removal rate and film uniformity, as expected. It is revealed that the film uniformity of the polished PSG film contains two and three-way interactions. Therefore, one can easily infer that process control based on a better understanding of the process is the key to success in current semiconductor manufacturing, in which the size of the wafer is approaching 300 mm and is scheduled to continuously increase up to 450 mm in or slightly after 2012.

• 한국의상디자인학회지
• /
• 제9권2호
• /
• pp.15-30
• /
• 2007

The purpose of this study is to investigate the effect of makeup, clothing tone and clothing style on wearer's with same color coordination of lipstick and clothing. The experimental materials developed for this study were a set of stimulus and response scales (7-point scale semantic). The stimuli were 64 color pictures were manipulated by computer simulation. This experiment design was $2{\times}2{\times}4{\times}4$ factorial design. The stimuli were a set of eyeshadow color(brown), clothing style (formal style of Jacket / skirt and casual style of cardigan / pants), lipstick and clothing color (red and orange), lipstick tone(vivid, light, dull and dark), clothing tone(vivid, light, dull and dark). The subjects of this research were 384 female undergraduates living in Gyeongsangnam-do. The investigation was carried out at a lecture hall at the time between 10 a.m. and 3 p.m. in May 2006. The data were analyzed using SPSS program. Factor analysis, 4-way ANOVA, t-test, and Duncan test were used as analysis methods. Image factors according to variation of clothing style, clothing color, and makeup color are composed of 4 different dimensions (visibility, attractiveness, tenderness, and stability). In dimension of the visibility, the image was perceived to be glowing and luxurious regardless of lipstick tone and lipstick color in the case of the vivid tone clothing. According to the variation of clothing style, clothing color and tone, makeup color composed of eyeshadow color, lipstick color and tone, it was investigated that the images for a clothing wearer were expressed diversely, were shown differently in image dimensions, and could be produced to different images. The analysis data for images according to the combination of makeup and clothing color, tone, and style thus provide basic material for image consulting or color coordination.

• Journal of Plant Biotechnology
• /
• 제45권2호
• /
• pp.146-153
• /
• 2018

Lilium ledebourii Bioss is a wild species of Lilium, which grows naturally in some provinces of Iran. Previous studies on Lilium tissue culture have been linked to direct regeneration and a few studies have been conducted on indirect regeneration, which has been studied under bright conditions. In this study, for the first time in the world, all the stages of indirect regeneration (callus induction, shoot and root induction) have been studied under dark conditions. Callus formation and the regeneration levels of L. Ledebourii Bioss were examined for three replicates in an MS (Murashige and Skoog) medium with different hormonal compositions and by using a factorial experiment in the framework of a completely random plan. For callus initiation, 2,4-D and kinetin hormones were used in five and four levels, respectively, as auxin and cytokinin. Results showed that the highest percentage of the callus was found in $3{\mu}M$ of 2,4-D and $0.5{\mu}M$ of kinetin. In terms of callus wet weight, the highest amount was found in $3{\mu}M$ of 2,4-D and $0.5{\mu}M$ of kinetin. In addition, in terms of diameter, the highest amount was found in $3{\mu}M$ of 2,4-D, and $0.5{\mu}M$ of kinetin. In summary, the 2,4-D hormone had a major impact on the percentage of regeneration increase so that the best response was related to the composition of $3{\mu}M$ of 2,4-D, and $0.1{\mu}M$ of kinetin. This study contended that auxin and cytokinin can induce long shoots and roots through cell elongation in dark condition.