• Membrane and Water Treatment
• /
• v.11 no.2
• /
• pp.97-109
• /
• 2020

Membrane fouling is the main drawback of membrane technology. Frequent membrane cleaning and membrane replacement are, therefore, required to reduce membrane fouling that causes permeate flux reduction, lower rejection, or higher operating pressure. Studies have proved that the alteration of membrane properties is the key controlling factor in lessening membrane fouling. Among stimuli-responsive membranes, thermo-responsive membrane is the most popular, with a drastic phase transition and swelling-shrinking behavior caused by the temperature change. In this study, the thermo-responsive ability of two commercial membranes, PolyCera® Titan membrane and PolyCera® Hydro membrane, at different temperatures was studied on the antifouling function of the membrane in palm oil mill effluent (POME) treatment. The evaluation of the membrane's thermo-responsive ability was done through three cycles of adsorption (fouling) and desorption (defouling) processes in a membrane filtration process. The experimental result depicted that PolyCera® Hydro membrane had a higher membrane permeability of 67.869 L/㎡.h.bar than PolyCera® Titan membrane at 46.011 L/㎡.h.bar. However, the high membrane permeability of PolyCera® Hydro membrane was compensated with low removal efficiency. PolyCera® Titan membrane with a smaller mean pore size had better rejection performance than PolyCera® Hydro membrane for all tested parameters. On the other hand, PolyCera® Titan membrane had a better hydrodynamic cleaning efficiency than PolyCera® Hydro membrane regardless of the hydrodynamic cleaning temperature. The best hydrodynamic cleaning performed by PolyCera® Titan membrane was at 35℃ with the flux recovery ratio (FRR) of 99.17 ± 1.43%. The excellent thermo-responsive properties of the PolyCera® Titan membrane could eventually reduce the frequency of membrane replacement and lessen the use of chemicals for membrane cleaning. This outstanding exploration helps to provide a solution to the chemical industry and membrane technology bottleneck, which is the membrane fouling, thus reducing the operating cost incurred by the membrane fouling.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.4
• /
• pp.382-388
• /
• 2010

In this work the replacement material for magnesium alloy was investigated and an optimized design was suggested for the horizontal fin of a fighter's external fuel tank. For the replacement of magnesium alloy, Aluminum alloy, AL 2034-T351, was selected by considering material properties and its procurement. The strength and fracture toughness properties of AL 2034-T351 are stronger than those of magnesium alloy, but the specific weight of AL 2034-T351 is heavier than that of magnesium alloy by 65%. To meet the allowable limit of C.G. shift in the tank, the design of horizontal fin was optimized by reducing the original shape by 20% and resizing the maximum thickness to 7 mm. From the results of the static and dynamic stress analysis for improving the safety factor of the joint section and the joint hole, the radius of curvature in the aft joint section of the new fin was designed as 8.5mm.

• Archives of Reconstructive Microsurgery
• /
• v.23 no.2
• /
• pp.97-100
• /
• 2014

The number of patients with chronic renal failure who require renal replacement therapy is increasing and dialysis is still the mainly used renal replacement therapy. The first choice of surgical technique currently used is side-to-end anastomosis of the radial artery and the cephalic vein. The authors report on a case of an effective arteriovenous shunt operation performed using microscopy. A 53-year-old male with chronic renal failure was referred to plastic and reconstructive surgery department to undergo an arteriovenous shunt operation. Venography was performed before surgery in order to find the appropriate vessel for the arteriovenous shunt operation. The cephalic vein on the wrist showed a diameter of over 4 mm, which was appropriate for an arteriovenous shunt operation. Anastomosis of the vessels was performed under microscopy using Nylon #9-0. Blood flow and vessel diameter were evaluated by venography after surgery and showed well maintained function of the shunt. Complications such as bleeding, edema of the upper arm, and wound dehiscence did not occur. Many factors and certain complications may affect the long-term patency of an arteriovenous shunt; however, exquisite surgical technique is the most important factor in a successful operation. Thus, arteriovenous shunt operation using microscopy is thought to be a good treatment option.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.40
• /
• pp.3-30
• /
• 2008

This article attempts to describe and analyze the rules on the buyer's remedies for lack of conformity under PELS. It shows that such remedies under the PELS operate in a two-tier remedial scheme which is alien to both domestic and international legal systems. That is, repair and replacement take the position of primary remedy, whereas termination, price reduction and damages are secondary remedies which are available only where the primary remedies cannot be invoked. Notwithstanding its superiority, the PELS have some drawbacks in several aspects. First, the PELS seems to place its focus on the factor of cost except the other factors, for instance, the significance of the lack of conformity, when one decides whether the first tier remedies cause the seller unreasonable effort or expense. It is argued that the factors can be considered by referring to art. 1:302 PECL. Second, the PELS does not expressively provide any exclusion of the seller's right to choose between repair or replacement on the basis of unreasonable uncertainty in reimbursing the expenses advanced by the buyer. It argues that if there is such uncertainty, it should be regarded as causing the buyer an unreasonable inconvenience under art. 4:204(1). Third, the PELS does not seem to properly reflect the consumer's interests in that most consumers prefer to have the absolute right of termination as against the commercial sellers who have a relatively stronger bargaining position. The reasons for that is that there is a big hurdle, i.e., a hierarchy of remedies, to be overcome by the consumer to battle with the commercial seller, and that unavoidable vagueness in defining a minor lack of conformity has been often used against the consumer, but in favour of the commercial seller with a strong bargaining position.

• Clinical and Experimental Pediatrics
• /
• v.51 no.12
• /
• pp.1359-1362
• /
• 2008

The most effective treatment strategy for patients with hemophilia is replacement therapy with FVIII or FIX concentrates, which usually requires long-term, uncomplicated venous access. However, central venous access device (CVADs, ports) insertion requires inpatient admission and general anesthesia, and presents some problems regarding health insurance coverage. Peripherally inserted central catheters (PICCs) were inserted in two severe hemophilia patients aged 7 and 11 years with high titers of inhibitors. They experienced frequent bleeding episodes and required replacement therapy, which eventually resulted in difficulty in acquiring venous line access. Factor VIII activity was below 1%, and inhibitor titers were 160 and 26.3 BU/ml. In an outpatient setting, PICC lines are easily placed by radiological guidance and require local anesthesia alone. PICC has been feasible, in particular, for hemophilia patients with frequent bleeding episodes.

• Journal of Chest Surgery
• /
• v.25 no.12
• /
• pp.1404-1415
• /
• 1992

To understand the factors influencing Atrial fibrillation and embolism in mitral valve surgery and prevent their risk, we have reviewed our 324 patients who underwent mitral valve surgery from Fev. 1982 to May 1992. Age, disease duration, lesion type, left ventricular function and left atrial dimension were chosen as preoperative factors influencing the incidence of atrial fibrillation and embolism and their postoperative course, The number and type of replaced valve, site of atriotmy, LA obliteration, ACT and use of Defibrillator were chaser. as operative factors influencing postoperative rhythm change and postop emb-olization. The results of analyses were as follows 1. The incidence of preoperative atrial fibrillation, systemic embolism and LA throbmus was 63. 6%, 10.56% and 19.8% relatively. 2. The preoperative factors of atrial fibrillation onset was old age, prolonged symptom duration, stenotic lesion, lager LAD and lower ejection fraction. In the preoperative systemic embolism preoperative factors were old age, female, stenotic lesion. The left atrial thrombus found more commonly in patients with atrial fibrillation, old age, prolonged symptom duration, stenotic lesion and low ejection fraction. 3. The preoperative atrial fibriation persisted postoperatively in 165[50.9%] and converted to normal sinus rhythm in 50[15.4%]. The preoperative normal sinus rhythm per-eisted in 100[31%] and atrial fibrillation was occured postoperatively in 9[2.7%]. The prolonged symptom duration was the preoperative factor of persist atrial fibrillation. 4. Among 95 long term follow-up patients, atiral fibrillation was continued in 59[60%]. Conversion to normal sinus rhythm was more common significantly in left atriotomy and bileaflet valve replacement. 5. There were 12 patients who had postoperative embolism. Female, persist atrial fibrillation, no LA olbiteration and tilting disc monocusp valve were considered as possible factors influencing postoperative embolism but was impossible to analyse their statistical significance due to small sample size. So we have concluded that the patients with above risk factors need anticoagulant and early surgical intervention. Left atriotomy with minimal atrial injury, left auricular obliteration and bileaflet valve replacement may be needed to reduce postoperative atrial fibrillation persist and embolism.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.4
• /
• pp.90-96
• /
• 2020

Polymer electrolyte membrane fuel cells, which convert the chemical reaction energy of hydrogen into electric power directly, are a type of eco-friendly power for future vehicles. Due to the sluggish oxygen reduction reaction and costly Pt catalyst in the cathode, the research related to the replacement of Pt-based catalysts has been vitally carried out. In this case, however, the performance is significantly different from each other and a variety of factors have existed. In this review paper, we rearrange and summarize relevant papers published within 5 years approximately. The selection of precursors, synthesis method, and co-catalyst are represented as a core factor, while the necessity of research for the further enhancement of activity may be raised. It can be anticipated to contribute to the replacement of precious metal catalysts in the various fields of study. The final objective of the future research is depicted in detail.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.351-359
• /
• 2013

Blast furnace slag (BFS) have many advantages that are related to effective value improvement on applying to concrete while side effects of blast furnace slag also appear. Thus, research team conducted an experiment with high volume slag to see if the attribute of waste alkali accelerator for mixing rate, mixed use of NaOH and $Na_2SiO_3$, and early strength agent for mixing rate for replacement ratio and for the types of the stimulants in order to increase the use of blast furnace slag1s powder. As the result of the experiment, when it comes to compression strength, all of the alkali stimulants have been improved as the replacement rate increases except for sodium hydroxide. Among the alkali stimulants, sodium silicate was high on dynamic elastic modulus and absorption factor. In case of early strength agent, the mix of mixing 1.5% and blast furnace slag 75% have showed high strength enhancement. In event of Waste Alkali accelerator, it has showed different consequences for each experiment.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.337-346
• /
• 1996

Debonding of cement-femoral stem interface has been suggested as a initial focus of loosening mechanism in many previous studies of cemented total hip replacement. The purpose of this study was to investigate the effect of debonding of cement-femoral stem interface to the bone-cement interface by using three-dimensional non-liner finite element analysis. Three cases of partial debonded, full debonded, full bonded cement-bone interface were modelled with partial bonding of distal 70mm from the tip of femoral stem. Each situation was studied under loading stimulating one-leg stanced gait of 68kg patient. The results showed that under partial and full debonded cement-stem interface condition the peak von Mises stress(3.1 MPa) were observed at the cement of bone-cement interface just under the calcar of proximal medial of femur, and sudden high peak stresses(3.5MPa) were developed at the distal tip of femoral stem at the lateral bone-cement interface in all 3 cases of bonding. The stresses were transfered very little to the cement of upper lateral bone-cement interface in partial and full debonded cases. Thus, once partial or full debonded cement-femoral stem interface occured, 3 times higher stress concentration were developed on the cement of proximal medial bone-cement interface than full bonded interface, and these could cause loosening of cemented total hip replacement. Clinically, preservation of more rigid cement-femoral stem interface may be important factor to prevent loosening of femoral stem.

• Journal of Chest Surgery
• /
• v.32 no.3
• /
• pp.307-309
• /
• 1999

Warfarin-induced skin necrosis is a rare complication caused by transient hypercoagulable state. This state is a result of rapid decline of the protein C activity relative to that of coagulation factor II, IX, and X during initiation of oral anticoagulant therapy. We experienced a case of warfarin-induced skin necrosis involving both breasts in a patient who underwent double valve replacement 1 month before. Warfarin was replaced to a low- molecular weight heparin and the necrotic breast lesion was healed spontaneously. Low-dose warfarin was restarted and gradually increased, after which a low molecular weight heparin discontinued..