• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.29-32
• /
• 2008

In this paper, we propose one unsupervised classification technique using the degree of polarization (DoP) and the co-polarized phase-difference (CPD) statistics, instead of the entropy and alpha. It is shown that the DoP is closely related to the entropy, and the CPD to the alpha. The DoP explains the feature how much the effect of multiple reflections is contained. Hence, the DoP could be used as an important factor for classifying classes. The CPD can also be computed from the measured Mueller matrix elements. For the smooth surface scattering, the CPD is about $0^{\circ}$, and for dihedral-type scattering, the CPD is about $180^{\circ}$. A DoP-CPD diagram with appropriate boundaries between six different classes is developed based on the SAR image. The classification results are compared with the existing Entropy-alpha diagram as well as the IPL-AirSAR polarimetric data. The technique may have capability to classify an SAR image into six major classes; a bare surface, a village, a crown-layer short vegetation canopy, a trunk-layer short vegetation canopy, a crown-layer forest, and a trunk-dominated forest. Based on the DoP and CPD analysis, a simple three-component decomposition technique was also proposed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.251-254
• /
• 2001

In this paper, we analyzed the properties change of electric wire when the thermal stress was applied to NFR-8 and FR-PVC 600[V] wire. Messurement is made of the attenuation of a light beam by smoke accumulating with in a closed chamber due to nonflaming pyrolytic decomposition and flaming combustion. Results are expressed in terms of specific optical density which is derived from a geometrical factor and the measured optical density a measurement characteristic of the concentration of smoke. Referenced documents were ASTM E662 standard test method for specific Ds genalated by solid materials. The furnace control system shall maintain the required irradiance level under steady-state condition with the chamber door closed of $2.5{\pm}0.04[w/cm^{2}]$ for 20 min. According to the results of the smoke density analysis of NFR-8 and FR-PVC the highest decomposition flaming smoke density range of NFR-8 and FR-PVC were 25.2 to 37.5 and 51.1 respectively. Nonflaming smoke density range of NFR-8 and FR-PVC were 100.4 to 112.2 and 126.5 to 398.8. The amount of carbon monoxide generated was found to be much higher in FR-PVC decomposition than in NFR-8 due to incomplete combustion of FR-PVC which has high content of carbon in compound.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.251-254
• /
• 2001

In this paper, we analysed the properties change of electric wire when the thermal stress was applied to NFR-8 and FR-PVC [600] wire. Measurement is made of the attenuation of a light beam by smoke accumulating with in a closed chamber due to nonflamining pyrolytic decomposition and flaming combustion. Results are expressed in terms of specific optical density which is derived from a geometrical factor and the measured optical density a measurement characteristic of the concentration of smoke. Referenced documents were ASTM E662 standard test method for specific Ds generated by solid materials. The furnace control system shall maintain the required irradiance level under steady-state condition with the chamber door closed of 2.5${\pm}$0.04[w/$\textrm{cm}^2$] for 20 min. According to the results of the smoke density analysis of NFR-8 and FR-PVC the highest decomposition flaming smoke density range of NFR-8 and FR-PVC were 7.2 to 77.5 and 51.1 respectively. Nonflaming smoke density range of NFR-8 and FR-PVC were 100.4 to 112.2 and 126.5 to 398.8. The amount of carbon monoxide generated was found to be much higher in FR-PVC decomposition than in NFR-8 due to incomp1ete combustion of FR-PVC which has high content of carbon in compound.

• 농촌계획
• /
• 제14권4호
• /
• pp.97-108
• /
• 2008

The present study construct a new technique that can evaluate diverse rural policies, which have been applied to the rural development programs at the village level. The method incorporates spatial econometrics models with a decomposition method that has little been utilized before. We applies the technique to evaluate the rural development programs that have been carried out by the Korea Forest Service and. Korea Rural Development Agency. The technique proved to be quite useful in that the technique efficiently separate the direct effect caused by the government policy from the effect explained by the endowment effect such as regional or area characteristics, and residual effect that cannot be identified by the models. The present study concludes with suggesting more quantitative methods need to be developed to evaluate diverse government policy programs, which enables us to discern correct policy effects.

• KSBB Journal
• /
• 제8권3호
• /
• pp.272-281
• /
• 1993

유당을 탄소원으로 K. marxianus를 발효하는 경우, 용해산소의 농도와 조엽조건에 따른 발효의 진행 상태를 정확히 예측하였다. 예측에 필요한 고정된 계수를 갖는 양론식의 수를 singular variable decomposition 분석에 의하여 결정하고 발효의 추정에 사용될 수 었는 양론관계를 target test에 의하여 결정하였으며, 발효의 진행상태를 추정하였다 또한, 단세포 단백질을 유당으로부터 연속생산하는 경우 에너지원을 효율적으로 이용하기 위한 조업조건을 제시하였다.

• International journal of advanced smart convergence
• /
• 제8권2호
• /
• pp.39-46
• /
• 2019

Human mobility estimation plays a key factor in a lot of promising applications including location-based recommendation systems, urban planning, and disease outbreak control. We study the human mobility estimation problem in the case where recent locations of a person-of-interest are unknown. Since matrix decomposition is used to perform latent semantic analysis of multi-dimensional data, we propose a human location estimation algorithm based on matrix factorization to reconstruct the human movement patterns through the use of information of persons with correlated movements. Specifically, the optimization problem which minimizes the difference between the reconstructed and actual movement data is first formulated. Then, the gradient descent algorithm is applied to adjust parameters which contribute to reconstructed mobility data. The experiment results show that the proposed framework can be used for the prediction of human location and achieves higher predictive accuracy than a baseline model.

• BMB Reports
• /
• 제42권9호
• /
• pp.617-622
• /
• 2009

We investigated the genetic associations of ischemic stroke by identifying epistasis of its heterogeneous subtypes such as small vessel occlusion (SVO) and large artery atherosclerosis (LAA). Epistasis was analyzed with 24 genes in 207 controls and 271 patients (SVO = 110, LAA = 95) using multifactor dimensionality reduction and entropy decomposition. The multifactor dimensionality reduction analysis with any of 1- to 4-locus models showed no significant association with LAA (P > 0.05). The analysis of SVO, however, revealed a significant association in the best 3-locus model with P10L of TGF-$\beta{1}$, C1013T of SPP1, and R485K of F5 (testing balanced accuracy = 63.17%, P < 0.05). Subsequent entropy analysis also revealed that such heterogeneity was present and quite a large entropy was estimated among the 3 loci for SVO (5.43%), but only a relatively small entropy was estimated for LAA (1.81%). This suggests that the synergistic epistasis model might contribute specifically to the pathogenetsis of SVO, which implies a different etiopathogenesis of the ischemic stroke subtypes.

• 자원ㆍ환경경제연구
• /
• 제15권1호
• /
• pp.27-50
• /
• 2006

우리나라 산업의 1990년과 2000년의 $CO_2$ 배출량을 각각 추정하고, 이 기간중 배출량 변화에 영향을 준 요인별 기여도를 조사하였다. 산업별 배출량에는 생산과정에서 직접 사용하는 에너지는 물론 원재료 생산에 사용된 에너지로 인해 간접적으로 배출되는 $CO_2$까지 포함하였다. 배출량 추정에는 통상적인 산업연관모형을 환경부문으로 확장한 $CO_2$ 혼합 산업연관모형을 이용하였다. 배출량 변화의 요인 분해에는 산업연관분석을 이용한 구조분해기법 (IO-SDA)을 사용하였다. 이 때 각 요인별 영향 계산에 적용하는 가중치는 기준연도와 비교연도의 평균값을 사용하여 가중치 선택의 자의성을 줄이고 완전분해가 되게 하였다. 추정 결과 국내 산업의 직 간접 $CO_2$ 배출량은 1990년에 6,444만 탄소톤에서 2000년에는 1억 1,552만 탄소톤으로 5,163만 탄소톤이 증가한 것으로 나타났다. 직접 $CO_2$ 유발계수 변화, 간접 $CO_2$ 유발계수 변화, 국내 최종수요 성장, 수출 증가, 수입 증가, 국내 최종수요 구조 변화, 수입 구조 변화, 수출 구조 변화 등 여덟 가지 요인별로 배출량 변화에 미친 영향을 분석한 결과 직접 $CO_2$ 유발계수 변화, 간접 $CO_2$ 유발계수 변화, 수입수요의 증가 및 구조 변화는 배출량 감소 효과를 낳았으나, 국내 최종수요 성장 및 구조 변화와 수출수요 증가와 구조 변화는 배출량을 증가시키는 요인으로 작용하였다. 산업이 직접 사용하는 에너지로 인한 $CO_2$ 배출량은 물론 제품 생산 과정에서 투입된 원재료의 생산에 소요된 에너지로 인한 배출량까지 모두 파악하는 것은 $CO_2$ 배출 저감 정책의 효율성을 높일 수 있는 기초자료로 활용될 수 있을 것으로 생각된다.

• 자원ㆍ환경경제연구
• /
• 제20권2호
• /
• pp.229-254
• /
• 2011

본 논문은 LMDI(Log Mean Divisia Index) 방법론을 이용하여 국내 제조업의 온실가스 배출에 대한 요인분해분석을 하였다. 국내 제조업의 온실가스 배출에 대한 요인분해는 크게 생산효과, 구조효과, 집약도효과, 에너지믹스효과, 배출계수효과 등 다섯 가지 요인으로 분해하였다. 1991년~2007년까지 국내 제조업의 온실가스 배출변화 요인을 분석한 결과를 보면 국내 제조업의 온실가스 배출은 대부분 생산효과에 의해서 증가하였다. 구조효과와 집약도는 온실가스 배출을 줄이는 역할을 하였으며, 구조효과보다는 집약도효과가 더 많이 온실가스 배출을 감소시키는 방향으로 작용하였다. 그리고 에너지믹스효과와 배출계수효과는 다른 효과들에 비해서 그 비중이 작지만 온실가스 배출 증감에 영향을 미치고 있다. 에너지믹스효과는 온실가스 배출 증가 요인으로 배출계수효과는 감소요인으로 작용하였다. 한편 시계열로 에너지 소비를 요인분해 해 본 결과 1998년 IMF 체제를 전후로 온실가스 패턴에 변화가 일어났다. IMF 체제 이후로 구조효과와 집약도효과에 의한 온실가스 감축이 IMF 체제 이전보다 더욱 두드러진 것이 특징이다. 2001년 이후 진행된 신고유가 시대를 맞이해서는 구조효과와 집약도효과가 더욱 촉진되었다.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1500-1511
• /
• 2017

The purpose of this paper is to study a high-performance control scheme for neutral-point-clamping three-level (NPC-3L) inverter fed dual three-phase permanent magnet synchronous motor (PMSM) drives by considering some asymmetric factors such as the non-identical parameters in phase windings. To implement this, the system model is analyzed for dual three-phase PMSM drives with asymmetric factors based on the vector space decomposition (VSD) principle. Based on the equivalent circuits, PI controllers with feedforward compensation are used in the d-q subspace for regulating torque, where the cut-off frequency of the PI controllers are set at the twice the fundamental frequency for compensating both the additional DC component and the second order component caused by asymmetry. Meanwhile, proportional resonant (PR) controllers are proposed in the x-y subspace for suppressing the possible unbalanced currents in the phase windings. A dual three-phase space vector modulation (DT-SVM) is designed for the drive, and the balancing factor is designed based on the numerical fitting surface for balancing the DC link capacitor voltages. Experimental results are given to demonstrate the validity of the theoretical analysis and the proposed control scheme.