• The Journal of Fisheries Business Administration
• /
• v.33 no.1
• /
• pp.19-41
• /
• 2002

Recently, the number of Internet shopping malls increases dramatically Internet shopping malls offer direct sales by electronic catalogs. As compared with to physical stores and paper catalogs, electronic catalogs differ in terms of the varieties and types of products offered, promotional efforts, service, interface, ordering and delivering, and so on. This paper analysed the features of electronic catalogs for fisheries by 45 variables. By descriptive statistics of electronic catalogs for fisheries, most electron)c catalogs had sufficient product related information. But promotion and transaction security related features were scarce. And some development technologies of electronic catalogs for fisheries were obsolete. By factor analysis, there were 9 factors of electronic catalogs for fisheries, that was, design of product pages, transaction information, playfulness, convenience of product selection, interface design, design of homepages, product information, learning capability, other electronic catalog related factor. Thus in standardizing electronic catalog for fisheries products, the above 9 factors should be reflected significantly.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.251-254
• /
• 2000

This paper was to measure the structure, electric characteristics of 0.05Pb($(Al_{0.5}Nb_{0.5})$) - 0.95Pb$(Zr_{0.52}Ti_{0.48})O_3$ ceramics dopped with Cr+Fe. The results of this paper were gotten such as follows; The dielectric constants were decreased with Cr+Fe. The dielectric loss was minimum value of 1.008[%], dopped with Cr+Fe O.9[wt%] at 1200[$^{\circ}C$], In case of sintering at 1150[$^{\circ}C$], electromechanical factodkp) was maximum value of kp 42.73[%], at Cr+Fe 0.9[wt%]. The mechanical quality factor(Qm) was maximum value at Cr+Fe 1.2 [wt%], Also, in case of dopped with Cr+Fe, it make a improvement in temperature coefficient of resonant frequency at 0.3[wt%], 1150[$^{\circ}C$].

• International Journal of Computer Science & Network Security
• /
• v.21 no.9
• /
• pp.346-353
• /
• 2021

In this proposal, we aim to enhance the security of systems accounts by improving the authentication techniques. We mainly intend to enhance the accuracy of the one-time passwords via including voice biometric and recognition techniques. The recognition will be performed on the server to avoid redirecting voice signatures by hackers. Further, to enhance the privacy of data and to ensure that the active user is legitimate, we propose to periodically update the activated sessions using a user-selected biometric factor. Finally, we recommend adding a pre-transaction re-authentication which will guarantee enhanced security for sensitive operations. The main novelty of this proposal is the use of the voice factor in the verification of the one-time password and the various levels of authentications for a full-security guarantee. The improvement provided by this proposal is mainly designed for sensitive applications. From conducted simulations, findings prove the efficiency of the proposed scheme in reducing the probability of hacking users' sessions.

• International Journal of High-Rise Buildings
• /
• v.9 no.4
• /
• pp.325-334
• /
• 2020

This paper aims to evaluate the interfacial stress concentrations on connection between vertical through-plate and H-beam in CFT column. Full-scale experiments were performed on three specimens with varying thickness of the vertical through-plate to investigate the interfacial stress concentration factor in the connections. The specimens underwent brittle failure at the location where the steel beam is connected to the vertical through-plate before the steel beam reached its plastic moment. The strain data of the part were analyzed, and the sectional analyses were conducted to determine appropriate residual stress models. In addition, the stress concentration factor was quantified by comparing the analytical local behavior in which the stress concentration is not reflected and the experimental data reflecting the stress concentration. The results showed that the maximum reduction of the stress concentration factor due to an increase in the thickness of the vertical through-plate is 50.3%.

• Health Policy and Management
• /
• v.2 no.2
• /
• pp.221-237
• /
• 1992

The reasons for cost inflation in medical insurance expenditure are classified into demand pull inflation and cost push inflation. The former includes increase in the number of beneficiaries and utilization rate, while the latter includes increase in medical insurance fee and the charges per case. This study was conducted to analyze sources of increases of expenditure in medical insurance demonstration area by the period of 1982-1987 which was earlier than national health insurance and the period of national health insurance(1988-1990). The major findings were as follows: Medical expenditure in these areas increased by 9.4%(15.1%) annually between 1982 and 1990 on the basis of costant price(current price) and for this period, the yearly average increasing rate of expenses for outpatient care[10.5%(15.8%)] was higher than that of inpatient care [7.3%(12.6%)]. Medical expenditure increased by 6.3%(8.9%) annually between 1982 and 1987, the period of medical insurance demonstration, while it increased by 10.7%(18.9%) after implementing national health insurance(1988-1990). Medical expenditure increased by 35.9%(45.9%) between 1982 and 1987. Of this increase, 115.2%(92.1%) was attributable to the increase in the frequencies of utilization per beneficiary and 61.0%(68.1%) was due to the increase in the charges per case, but the expenditure decreased by 76.2%(60.2%) due to the reduction in the number of beneficiaries. Beteen 1988 and 1990, the period of national health insurance, medical expenditure increased by 21.2%(41.4%). Of this increase, 87.5%(46.4%) was attributable to the increase in the frequencies of utilization per beneficiary and 52.4%(73.4%) was due to the increase in the charges per case, and of the increase in the charges per case, 69.6%(40.8%) was attributable to the increase in the days of visit per case. Medical expenses per person in these areas increased by 78.2%(89.0%) between 1982 and 1987. Of this increase, 76.6%(69.1%) was attributable to the increase in the frequencies of utilization per beneficiary and 23.4%(30.9%) was due to the increase in the charges per case. For this period, demand-pull factor was the major cause of the increase in medical expenses and the expenses per treatment day was the major attributable factor in cost-push inflation. Betwee 1988 and 1990, medical expenditure per person increased by 31.2%(53.1%). Of this increase, 60.8%(37.2%) was attributable to the demand-pull factor and 39.2%(62.8%) was due to the increase in the charges per case which was one of cost-push factors. In current price, the attributalbe rate of the charges per case which was one of cost-push factors was higher than that of utilization rate in the period of national health insurance as compared to the period of medical insurance demonstration. In consideration of above findings, demand-pull factor led the increase in medical expenditure between 1982 and 1987, the period of medical insurance medel trial, but after implementing national health insurance, the attributable rate of cost-push factor was increasing gradually. Thus we may conclude that for medical cost containment, it is requested to examine the new reimbursement method to control cost-push factor and service-intensity factor.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.8
• /
• pp.1065-1074
• /
• 2016

Growth factors play an important role during early ovarian development and folliculogenesis, since they regulate the migration of germ cells to the gonadal ridge. They also act on follicle recruitment, proliferation/atresia of granulosa cells and theca, steroidogenesis, oocyte maturation, ovulation and luteinization. Among the growth factors, the growth differentiation factor 9 (GDF9) and the bone morphogenetic protein 15 (BMP15), belong to the transforming growth factor beta (TGF-${\beta}$) superfamily, have been implicated as essential for follicular development. The GDF9 and BMP15 participate in the evolution of the primordial follicle to primary follicle and play an important role in the later stages of follicular development and maturation, increasing the steroidogenic acute regulatory protein expression, plasminogen activator and luteinizing hormone receptor (LHR). These factors are also involved in the interconnections between the oocyte and surrounding cumulus cells, where they regulate absorption of amino acids, glycolysis and biosynthesis of cholesterol cumulus cells. Even though the mode of action has not been fully established, in vitro observations indicate that the factors GDF9 and BMP15 stimulate the growth of ovarian follicles and proliferation of cumulus cells through the induction of mitosis in cells and granulosa and theca expression of genes linked to follicular maturation. Thus, seeking greater understanding of the action of these growth factors on the development of oocytes, the role of GDF9 and BMP15 in ovarian function is summarized in this brief review.

• Clinical and Experimental Reproductive Medicine
• /
• v.49 no.2
• /
• pp.149-158
• /
• 2022

Objective: Optimizing culture media for the incubation of immature oocytes is a vital strategy to increase the oocyte maturation rate during in vitro maturation (IVM) programs. This study evaluated the IVM and fertilization rates of human germinal vesicle (GV) and metaphase I (MI) oocytes using two different maturation media (commercial and homemade) with or without growth differentiation factor 9-β (GDF9-β). supplementation. Methods: Immature oocytes from intracytoplasmic sperm injection (ICSI) cycles were collected and assigned to one of two IVM culture media (commercial or homemade; cleavage-stage base). After maturation, MII oocytes were examined under an inverted microscope for the presence of the polar body, zona pellucida (ZP) birefringence, and meiotic spindle (MS) visualization after maturation in four conditions (commercial or homemade medium, with or without GDF9-β. ICSI was done for matured oocytes, and fertilization was confirmed by the visualization of two distinct pronuclei and two polar bodies. Results: No significant differences were found between the two culture media in terms of the time and rate of oocyte maturation or the rate of fertilization (p>0.05). Growth factor supplementation increased the 24-hour maturation rate for both GV and MI oocytes only in homemade medium. The maturation rate after 24 hours was higher for MI oocytes (p<0.05). Similar results were observed for MS visualization and ZP structure in both types of media (p>0.05). Conclusion: Higher rates of oocyte maturation and fertilization were observed after application of homemade medium supplemented with GDF9-β. Therefore, this combination may be recommended as an alternative for clinical IVM programs.

• Journal of Korea Port Economic Association
• /
• v.24 no.4
• /
• pp.47-70
• /
• 2008

The purpose of this study is to estimate total factor productivity(TFP) growth by stochastic frontier function and to grasp contributing factors of its growth rate by decomposing the total factor productivity into efficiency change, technical progress, scale change, and allocation change. Annual growth rate of total factor productivity for 1990-2003 is 0.019 (1.9%), higher than that of overall industry (0.010). The main component of TFP growth is not efficiency change but technical progress. Contributing factors of total factor productivity growth are change of allocation efficiency in port industry, technical progress in sea-transportation industry, and change of scale efficiency in transportation-equipment industry. The change of total factor productivity shows a decreasing trend since late in the 1990s. The annual technical efficiency of port-logistics industry is less than that of overall industry. Capital elasticity for output (0.391) is higher than labor elasticity (0.227), but scale economy of port-logistics industry is 0.618, which is far from optimal scale economy.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.9
• /
• pp.653-661
• /
• 2020

This study derives numerically the shell Knockdown factors for the isogrid-stiffened cylinders of space launch vehicles when the axially compressive force and internal pressure are applied simultaneously. A commercial nonlinear finite element analysis software, ABAQUS, is used for the present work. Nonlinear postbuckling analyses are conducted to calculate the global buckling loads of a cylinder without and with the internal pressure. The shell Knockdown factor is numerically derived using the predicted global buckling loads without and with the geometrically initial imperfection of a cylinder. When the internal pressure of 500 kPa and compressive force are applied to the cylinder, the global buckling load and Knockdown factor increases by 304% and 53%, respectively, as compared to the results without the internal pressure.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.5
• /
• pp.32-38
• /
• 2009

FTT(Fast Fourier Transform) processor is widely used in OFDM(Orthogonal Frequency Division Multiplesing) system. Because of the increased requirement of mobility and bandwidth in the OFDM system, they need large point FTT processor. Since the size of memory which stores the twiddle factor coefficients are proportional to the N of FFT size, we propose a new method by which we can reduce the size of the coefficient memory. In the proposed method, we exploit a counter and unsigned multiplier to generate the twiddle factor indices. To verify the proposed algorithm, we design TFCGs(Twiddle Factor Coefficient Generator) for 1024pint FFTs with R2SDF(Radix-2 Single-Path Delay Feedback), $R2^3SDF,\;R2^3SDF,\;R2^4SDF$ architectures. The size of ROM is reduced to 1/8N. In the case of $R2^4SDF$ architecture, the area and the power are reduced by 57.9%, 57.5% respectively.