• International Journal of Industrial Entomology and Biomaterials
• /
• 제26권2호
• /
• pp.81-88
• /
• 2013

Wet-spun silk fibers have attracted the attention of many researchers because of 1) the unique properties of silk as a biomaterial, including good biocompatibility and cyto-compatability and 2) the various methods available to control the structure and properties of the fiber. Cellulose nanofibrils (CNFs) have typically been used as a reinforcing material for natural and synthetic polymers. In this study, CNF-embedded silk fibroin (SF) nanocomposite fibers were prepared for the first time. The effects of CNF content on the rheology of the dope solution and the characteristics of wet-spun CNF/SF composite fibers were also examined. A 5% SF formic acid solution that contained no CNFs showed nearly Newtonian fluid behavior, with slight shear thinning. However, after the addition of 1% CNFs, the viscosity of the dope solution increased significantly, and apparent shear thinning was observed. The maximum draw ratio of the CNF/SF composite fibers decreased as the CNF content increased. Interestingly, the crystallinity index for the silk in the CNF/SF fibers was sequentially reduced as the CNF content was increased. This phenomenon may be due to the fact that the CNFs prevent ${\beta}$-sheet crystallization of the SF by elimination of formic acid from the dope solution during the coagulation process. The CNF/SF composite fibers displayed a relatively smooth surface with stripes, at low magnification (${\times}500$). However, a rugged nanoscale surface was observed at high magnification (${\times}10,000$), and the surface roughness increased with the CNF content.

• 소성∙가공
• /
• 제28권6호
• /
• pp.368-374
• /
• 2019

The past recent years have seen an increasing use of high-strength steel sheets in the automotive industry. However, the formability and damage prediction of these materials requires accurate acquisition of necking and fracture strains. Digital image correlation (DIC) is used to accurately capture the necking and fracture strains during testing. The fact that single time points of capturing vary with frame rate makes the need for an investigation necessary. For the high-strength steel DP980, the frame-rate dependences of the final necking and fracture strains values are analyzed here. To eliminate the influence of gauge length, the strains were measured locally by DIC. Results for three specimen shapes obtained with frame rates of 1 and 900 fps (frames per second) were considered and based on them, triaxiality failure diagrams (TFD) are established. It was observed that after diffuse necking, the deformation path departed from the initially linear one, and the stress triaxiality grew with ongoing deformation. It was further revealed that the frame rate-dependence of the necking strain was rather low (< 2%), whereas the fracture strain could be underestimated by up to 8% when the lower frame rate of 1 fps was used (compared with 900 fps). In this study, this issue is investigated while taking into consideration the three different triaxialities. These results demonstrate the importance of choosing an appropriate frame rate for the determination of necking and fracture strains in particular.

• 한국건축시공학회지
• /
• 제9권1호
• /
• pp.103-109
• /
• 2009

Strong winds according to global warming cause the increase of the frequency and the repair cost of damaged roofs. In the United States, Factory Mutual Insurance Company(FMIC) promotes the roofing design that resists heavy wind-load, as the means of strict criteria. This fact reveals that more durable roofing system will be also required in Korea. Therefore, this study aims at developing such a system with high wind-resistance performance using Thermoplastic polyolefin(TPO) and Electromagnetic induction technology(EIT) than the previous systems. The system presented in this study consists of 4 main devices as follow; 1) a disc to fix sheets for TPO & EIT method, which can conduct structural design according to site condition, such as region, building height, and wind load. 2) a nail to have about 30% stronger lifting-up capacity than that of the previous nail. 3) a disc to fix sheets, which has triangle protuberance not to damage sheets in the repeatable wind load, and 4) a electromagnetic induction device to combine a disc and a sheet by heating uniformly and quickly adhesive agent on the disc. The results of mock-up test illustrate that the system provides wind-resistant performance to achieve satisfactorily the structural design criteria of FMIC. In addition, the system is faster, chipper, and easier than the existing system, and is expected that this roofing system can be applied to the rehabilitations of an existing as well as a new building.

• 디지털콘텐츠학회 논문지
• /
• 제15권5호
• /
• pp.643-650
• /
• 2014

본 연구는 IPTV와 디지털케이블 사업자가 제공하는 VOD의 시청행태와 지상파 VOD 다시보기 서비스의 추세를 시계열로 분석하고 함의를 제시하는 연구이다. 연구자는 실제 미디어 플랫폼 사업자의 데이터를 바탕으로 VOD 실적을 추세 분석하였으며, 계절적 요인으로 1월과 8월에 피크 값의 반복이 진행됨을 확인하였다. 또한 개별 지상파들은 드라마 등의 히트 프로그램에 의해 본방 시청률과 VOD의 시청에 영향을 받는 것을 확인하였다. 그리고 지상파, 영화, 어린이 VOD의 관계를 시계열로 분석하고, 지상파VOD의 구매가 하락세인 것을 확인하였다. 당초 지상파와 플랫폼사업자는 본방송 시청률을 높이고 유료VOD 구매를 확대할 목적으로 홀드백 연장을 하였으나, 연구결과 오히려 시청자의 본방송 시청과 VOD 시청 모두 구매 욕구를 감소시킨 것을 확인할 수 있었다. 따라서 연구자는 본연구가 미디어사업자들이 향후 시청자를 고려한 미디어 정책을 제시하는데 도움이 되길 기대한다.

• 반도체디스플레이기술학회지
• /
• 제14권3호
• /
• pp.51-55
• /
• 2015

We have fabricated silver nanowire (AgNW) films as a stretchable and transparent electrode on polydimethylsiloxane (PDMS) substrates using a spray coater. Inherently, they show poor surface roughness and stretchability. To tackle it, we have employed a conductive polymer, poly (3,4-ethylenedioxythiophene) : Poly(styrene sulfonate) (PEDOT : PSS). PEDTO : PSS solution is mixed with AgNWs or spin-coated on the AgNW film. Compared with AgNW film only, PEDOT : PSS film only, and polymer-mixed AgNW films, the AgNW/polymer bilayer films exhibit much better surface roughness and stretchability. It is found that spray-coating of AgNWs on uncured PDMS and spin-coating of PEDOT : PSS solution on the AgNW films enhance the surface roughness of electrodes. Such a bilayer structure also provides a stable resistance under tensile strain due to the fact that each layer acts as a detour route for carriers. With this structure, we have obtained the peak-to-peak roughness ($R_{pv}$) as low as 76.8nm and a moderate increase of sheet resistance (from $10{\Omega}/{\Box}$ under 0% strain to $30{\Omega}/{\Box}$ under 40% strain).

• KIEAE Journal
• /
• 제16권4호
• /
• pp.41-46
• /
• 2016

Purpose: This is a study on the planning of temporary housing for post application of Mega Sports facilities. The subject of the study is 2018 Pyeongchang Winter Olympics, which is to suggest building an alternative temporary housing using shipping containers(high cube), which solve the lack of accommodations and recycle temporary housing after Olympics, save money and be eco-friendly in Olympics. Method: This study includes this ; research on the a fact-finding survey about Mega sports facilities post application and demand survey on 2018 Pyeongchang Winter Olympics accomodations and an analysis about temporary housing plan. Furthermore we decided temporary housing building plan by analyzing residents' needs and traits of the housing etc. Through this, we made a schematic design for household units. Result: As a result, this study is a plan of making space, forms, and structure. The planned size is $38.4m^2$(L:12m, W:3.2m) except balcony, and indoor height is 2.5m. The space consists of entrance, bathroom, bedroom and living room with folding furniture system. Also there's a detailed floor plan of the ceiling, wall, and floor we drew up. The ceiling and wall consist of dampproof film, noncombustible board, fire proof urethane form, and color-designed sheet. The floor is composed of floor tile, cement mortar, light concrete(with heat coil), insulation, and dampproof film. Additionally, this study is a plan of interior dry wall with detail using modular construction method for work efficiency and quality improvement.

• 한국지반공학회논문집
• /
• 제26권8호
• /
• pp.5-14
• /
• 2010

지반모형실험에서 2차원 평면변형률 상태를 모사하기 위해서는 흙을 담을 수 있는 두꺼운 유리 또는 플라스틱 시트의 토조가 필요하며, 이 때 흙과 접촉되는 토조벽면에서의 마찰저항을 최소화 하여야 한다. 하지만, 실제로 이러한 벽면마찰을 완전히 제거할 수는 없다. 본 연구에서는 벽면 마찰저항을 제거하기 위해 다양한 지름을 갖는 알루미늄 봉 지반모델을 도입하고 실내전단시험에 적용하였다. 또한 근거리 사진계측기법을 전단시험에 적용해 유용성을 검증하였다. 그 결과, 근거리 사진계측으로부터 얻은 평균 팽창각은 전단시험의 전단변형률-체적변형률 곡선으로부터 얻는 팽창각에 근접함을 확인할 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권6호
• /
• pp.879-886
• /
• 2016

As is in all economic activities, the highest yield per unit area is the main goal in animal production, while addressing the temperamental needs of animals often is ignored. Animal welfare is not only an ethical fact; it also has an economic value. Spatial environmental enrichment contributes positively to animal welfare by addressing their behavioral and mental requirements. The present study was conducted to determine the effects of weaning and spatial environmental arrangements on behaviors of goat-kids. Experimental groups were arranged in structured and unstructured spatial environments. Roughage feeder, semi-automatic concentrate feeder, bunk, bridge, and wood block were placed in the structured environment. No equipment was placed in the unstructured environment and paddock sides were enclosed with an iron sheet to prevent bipedal stance and to provide environmental isolation. In the study 10 male and 10 female Turkish Saanen goat kids were used in each group. Spatial environmental arrangements did not have significant impacts on the growth performance of kids (p>0.05). All objects in the structured group were accepted by the kids. Average use ratios of roughage feeder, semi-automatic concentrate feeder, bunk, bridge and wood block were observed as 19.3%, 14.0%, 12.6%, 3.8%, and 0.7%, respectively. There were significant differences between before- and after-weaning in use of all objects except for underneath bridge ($p{\leq}0.05$). Concentrate feed consumption, locomotion, and resting behaviors in kids showed significant differences by structural group and growth period. Roughage consumption was similar between groups, while it differed by growth period ($p{\leq}0.05$). Interaction frequency was significantly higher in structured group (p = 0.0023). Playing behavior significantly differentiated based on the growth period rather than on groups ($p{\leq}0.05$). Playing behavior significantly decreased after weaning. Abnormal oral activity was significantly higher in the structured group before weaning ($p{\leq}0.05$). Despite there being no installations facilitating climbing and bipedal stance, the kids of the unstructured group were able to exhibit 1/3 as much bipedal stance behavior as the kids of the structured group through leaning over slippery paddock wall or over their groupmates. Bipedal stance behavior of unstructured group was similar before and after weaning, while bipedal stance behavior before weaning was about 2 times that of after weaning in structured group. It was concluded that unstructured environmental arrangement limited the behavior repertoire of the goat kids.

• Journal of Ecology and Environment
• /
• 제35권4호
• /
• pp.259-267
• /
• 2012

Biomass changes, net primary production and transfer dynamics of dry matter in four subtropical humid montane grasslands at Ebbenadu, Korakundah, Thiashola and Wenlockdown in Nilgiri Biosphere Reserve (NBR), the Western Ghats, India, were investigated. Despite the early report of a higher density and dominance of $C_4$ species over $C_3$ species in these grasslands, no functional study of matter production had previously been carried out. Therefore, in order to determine the roles played by these two groups of species, the present study was attempted. The study revealed that the dry matter and net primary production contributed by $C_4$ species were much greater than those of its $C_3$ counterpart in all the grasslands. The turnover rate of aboveground dry matter for both $C_3$ and $C_4$ species was generally rapid, whereas it was slow for belowground parts, and litter components of $C_3$ and $C_4$ species together. In all grasslands, generally about 60% and 10% of the input were channeled to aboveground and belowground parts, respectively, by the $C_4$ species, whereas the $C_3$ species transferred only about 22% and 8% of dry matter to aboveground and belowground parts, respectively. The total disappearance of dry matter was 2.73, 2.10, 3.19, and $1.96\;g\;m^{-2}\;day^{-1}$ in Ebbenadu, Korakundah, Thiashola and Wenlockdown grasslands, which was 48.83%, 44.30%, 54.81%, and 41.09% of the total input, respectively, in these grasslands. This resulted in a considerable surplus dry matter production in all the grasslands studied. This balance sheet of dry matter in community function indicates that all the four studied grasslands were supporting the existing wild animals adequately in terms of pasture supply. The study further revealed that the stronger establishment of $C_4$ species rather than their $C_3$ counterparts, in terms of higher density and dominance, has driven them to play major roles in matter dynamics and system transfer functions in all the four grasslands studied. This fact evidenced that pasture from $C_4$ species for wild animals was determined to be higher in comparison to that of $C_3$ species.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제7권9호
• /
• pp.325-334
• /
• 2018

요구사항 추적성은 개발과 유지보수 과정 동안 지속적으로 관리해야 한다. 그러나, 실제에서는 품질 보증을 점검하는 단계에서 갱신한다. 이러한 차이는 개발자가 추적성을 갱신하는 노력에 비해 추적성을 통해 얻는 혜택이 적기 때문이다. 이러한 노력 대비 보상의 관점에서 우리는 일반적으로 사용하는 스프레드시트 형태의 요구사항 추적성 매트릭스에서 맵핑을 유연하게 바꿀 수 있는 방법을 제안한다. 제안의 목적은 개발자가 요구사항 추적성을 갱신하는데 들이는 노력을 줄이는 것이다. 제안 방법은 먼저, 각 시트에 두 산출물 간의 관계만을 기입하여 변경이 발생할 때, 개발자가 변경된 맵핑을 즉시 반영할 수 있도록 한다. 다음, 개발자가 원하는 시점에서 제안 방법은 자동적으로 모든 산출물의 관계를 계산하여 추적성 매트릭스를 생성한다. 또한 누락된 맵핑 관계를 색상으로 표시하고 척도를 계산하여 개발자가 추적성 매트릭스의 완전성을 파악하도록 돕는다. 우리는 제안 방법의 적용가능성을 파악하기 위하여 사례 연구를 수행하였다. 사례 연구는 제안한 요구사항 추적성 매트릭스가 실제 프로젝트에 적용 가능하며 변경된 맵핑 관계를 쉽게 수용함을 보여준다.