• 제목/요약/키워드: Fact sheet

검색결과 55건 처리시간 0.037초

송전선로 자계형성과 WHO의 건강영향 연구결과 고찰 (Magnetic fields on Transmission lines and public health evaluation of WHO)

  • 이달형;안병곤;김재준;김윤명
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 제40회 하계학술대회
    • /
    • pp.331_332
    • /
    • 2009
  • 1979년 Nancy Wertheimer와 Ed Leeper가 수행한 연구결과에서 자기장이 소아백혈병에 의한 사망률을 높일 수 있다는 가능성을 발표한 이후, 인체건강에 유해한지에 대한 많은 궁금증이 증가해 왔다. 이후 일부 검증되지 않은 연구결과를 여과없이 인용 보도함으로써 대다수 국민이 오해하고 막연한 불안감을 갖게 된 측면이 있으며, 전기의 소중함은 누구나 인정하면서 전력시설 인근 주민은 자계에 대해 염려하며 건설반대, 전력설비 이전 등 극저주파전자계의 피해를 우려하고 있는 실정이다. 본 고에서는 국내 송전선로 극저주파자계의 노출현황을 살펴보고, 2007년 6월 세계보건기구(WHO)가 발표한 극저주파전자계와 인체건강의 관계 검토를 마무리한 공식보고서(Fact sheet No.322)를 고찰하고자 한다.

  • PDF

극저주파전자계에 대한 WHO의 건강영향평가 고찰 (Exposure to extremely low frequency fields and public health)

  • 황종선;이달형;김영조;이상진;김재준
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 춘계학술대회 논문집 전기설비전문위원
    • /
    • pp.360-361
    • /
    • 2009
  • 1970년대부터 극저주파전자계가 인체건강에 유해한지에 대한 궁금증이 증가하고 있는 실정이다. 또한 그 시기로부터 중요한 이슈에 대한 해결방안과 향후 연구방향에 대한 지표설정을 위해 많은 연구가 행해져 왔다. 본 고에서는 세계보건기구(WHO)가 2007년 극저주파전자계와 인체건강의 관계 검토를 마무리한 공식보고서(Fact sheet No.322) 결과를 고찰해 보고자 한다.

  • PDF

냉연코일강판 수송용 화차의 안전성 평가를 위한 차체하중시험과 진동시험 (A safety evaluation on the loading and vibration test for transport freight car of cold rolled coil sheet)

  • 김원경;정종덕;윤성철;홍용기
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2003년도 춘계학술대회 논문집
    • /
    • pp.1499-1502
    • /
    • 2003
  • This paper describes the result of carbody and vibration test for freight car. The purpose of the test is to evaluate an safety which carbody structure shall be considered fully sufficient rigidity so as to load a freight car under maximum load and operating condition on line track. The test carbody is constructed by RS korea co., LTD. in accordance with KNR specfication. The test cases of the carbody is tested the vertical load and compressive load to verify the strength and stillness. The vibration test is tested for analysis and evaluation of vibration, to allow for the fact that mechanical vibration in railway vehicles have specific characteristics.

  • PDF

Overall Vibration Values for Reliable Wind Turbines - The New VDI 3834 and the New ISO 10816-21 Guideline Close a Gap - Less Vibration is Better -

  • Becker, Edwin
    • 소음진동
    • /
    • 제22권4호
    • /
    • pp.28-32
    • /
    • 2012
  • Condition-based maintenance on wind turbines not only involves maintenance, but also encompasses servicing, inspection, measurement and evaluation of the condition of the unit. The current condition can be evaluated on the basis of machine-specific overall vibration values. Until now, overall vibration values had not been defined for wind turbines. In fact, ISO 10816-3 explicitly excludes wind power plants. The new VDI 3834 closes this gap shown in Sheet 1: Vibration values for wind turbines up to 3 MW. In addition to the new VDI 3834 is the ISO 10816-21 in preparation. The author of the article Dr. Edwin Becker is the nominated expert for Germany.

알루미늄 판재 적용 십자형 액압성형 공정의 해석 및 실험적 고찰 (The Study of Sheet Hydro-Mechanical Forming Process for Aluminum Alloy Sheets by Experiment and Finite Element Analysis)

  • 신동우;윤영식;김동옥;유용문;한범석;강대건
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회A
    • /
    • pp.1000-1009
    • /
    • 2008
  • Hydro-mechanical forming process has numerous advantages compared to those of a conventional deep drawing process such as an excellent surface quality and low costs of dies. In fact, Hydro-mechanical forming is a desirable forming process for producing complex parts in automotive body components, and it is an excellent candidate for the forming process of aluminum panels. In this research, Hydro-mechanical forming process with a cross shape punch has been studied for Al-Si-Mg alloy sheets. Finite element analysis by LS-Dyna has predicted the deep drawing depth of the aluminum sheets, and the experiment has confirmed that result. Put Abstract text here.

  • PDF

Application of an Expert System for the location decision of Dimension Marking within a graphic drawing sheet for a metal grating production

  • Lee, Keun-Ho;Cho, Tae-Ho
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2003년도 Proceeding
    • /
    • pp.45-49
    • /
    • 2003
  • GDS (Grating automatic Drawing System), which is automatic design system of metal products called grating, is a system that produces various detailed drawings on the basis of information within a Plan Drawing that represents layout of the gratings such as locations, shapes, directions, etc However, automatically produced drawings by GDS do not fully satisfy the standard of the general dimension marking method used among the layout designers. The lack of this standard quality mainly results from the fact that overlapping among dimension markings appears frequently. To solve the overlapping problem we applied the rule-based expert system. The rules for the expert system are designed based on the expertise of skilled layout designers within the grating production lines.

  • PDF

계산과학공학 플랫폼을 위한 실행-이력 기반의 시뮬레이션 데이터 관리 프레임워크 설계 및 구현 (Design and Implementation of an Execution-Provenance Based Simulation Data Management Framework for Computational Science Engineering Simulation Platform)

  • 마진;이식;조금원;서영균
    • 인터넷정보학회논문지
    • /
    • 제19권1호
    • /
    • pp.77-86
    • /
    • 2018
  • 지난 수년간 KISTI는 EDISON이라는 온라인 시뮬레이션 실행 플랫폼을 통해 사용자들이 다양한 계산과학공학 분야에서 제공된 사이언스 애플리케이션에 대한 시뮬레이션을 수행할 수 있는 서비스를 제공하고 있다. 일반적으로 이러한 시뮬레이션은 대규모 계산을 수반하므로 대용량의 출력 데이터를 생산해 낸다. 온라인 플랫폼에서 이러한 시뮬레이션을 수행 할 때 발생하는 중요한 문제 중 하나는 많은 사용자가 동일한 (또는 거의 변하지 않는) 입력 매개 변수 또는 파일을 사용하여 시뮬레이션 요청 (또는 작업)을 플랫폼에 동시에 제출함으로써 플랫폼에 상당한 부담을 준다는 점이다. 다시 말해, 동일한 컴퓨팅 작업으로 인해 중복 컴퓨팅 및 스토리지 리소스가 빠른 속도로 소모된다는 점이다. 이와 같은 동일한 시뮬레이션 요청으로 인한 과도한 자원 사용 문제를 극복하기 위해, 본 논문은 실행 메타 데이터, 즉 프로비넌스를 기반으로 시뮬레이션 데이터를 효율적으로 관리하기 위한 IceSheet라는 새로운 프레임 워크를 제안한다. IceSheet 프레임워크는 시뮬레이션 실행과 관련된 프로비넌스를 수집하여 저장한다. 수집된 프로비넌스 정보는 중복 시뮬레이션 요청을 제외할 뿐만 아니라 오픈소스 검색 엔진인 ElasticSearch를 통해 기존 시뮬레이션 결과를 검색하는 데도 사용된다. 특히 본 논문은 IceSheet 프레임워크에서 저장된 시뮬레이션 결과를 검색하고 재사용할 수 있는 핵심 구성 요소에 대해 자세히 설명한다. 우리는 온라인 시뮬레이션 실행 플랫폼과 함께 연동하는 검색 엔진을 기반으로 제안된 프레임워크의 프로토타입을 구현하였다. 플랫폼에서 수집된 실제 시뮬레이션 실행 프로비넌스를 기반으로 제안된 프레임워크의 성능 평가를 수행하였다. 플랫폼과 완벽히 연동된 IceSheet 프레임워크는 사용자로 하여금 선택된 시뮬레이션 소프트웨어에 대해 과거에 입력된 매개 변수 값을 빠르게 검색하고 동일한 입력 매개 변수 값이 존재하는 경우 기존의 결과를 곧바로 반환할 수 있도록 할 것으로 기대된다. 따라서 제안된 프레임워크를 통해 이전에 실행된 시뮬레이션과 동일한 요청에 대해 중복 자원 소모를 없애고 실행 시간을 크게 단축시키는 데 도움이 될 것으로 기대한다.

선하중(先荷重)을 받은 RC보의 CFRP-Rod 휨보강 효과에 대한 실험적 연구 (An Experimental Study on the Flexural Behavior of Pre-loaded RC Beams Strengthened with CFRP-Rod)

  • 예상민;천우철;강주원;박성무
    • 한국공간구조학회논문집
    • /
    • 제7권1호
    • /
    • pp.79-85
    • /
    • 2007
  • FRP를 이용한 보강법 중에서도 기존에 일반적으로 행해진 보강법은 Plate 또는 Sheet의 형태로 콘크리트 표면에 부착하여 추가적인 강도를 발현하도록 하는 것이다. 그러나 조기 박락파괴, 부착면의 정리, 보강 단부의 앵커시공, 부착면에 대한 내화처리 등의 어려움이 많다. 이러한 문제점들에 대한 방안으로 막대(Rod) 형태인 CFRP-Rod를 보강모체에 홈을 파고 매립하는 NSMR(Near Surface Mounted Reinforcement)공법이 제안되었고, CFRP-Rod의 보강량, 길이, 간격 등의 변수에 의한 휨보강 능력의 평가에 대한 연구가 이루어져왔다. 그러나 구조물에서 CFRP-Rod의 보강은 어느 정도의 하중이 보강부위에 계속 재하된 상태로 보강이 이루어지게 되므로 본 연구에서는 보강전에 가해지는 선하중(Pre-loading)의 크기를 주요변수로 선하중의 크기에 따른 구조물의 거동 특성을 분석하고자 하였고, 선하중의 크기의 결정은 무보강 시험체의 공칭모멘트와의 비로 결정하였다.

  • PDF

An Analytic Case Study on the Management of an Upper-level General Hospital(2010-2012)

  • Park, Hyun-Suk;Lee, Jung-Min;Baek, Hong-Suck;Lee, Jun-Ho;Park, Sang-Sub
    • 한국임상보건과학회지
    • /
    • 제2권1호
    • /
    • pp.1-16
    • /
    • 2014
  • Purpose. For a more efficient hospital management, this study aims to provide basic data so that the hospital management and staff in charge of hospital administration may systematically classify and collect hospital information, by analyzing the ordinary characters of an upper-level general hospital system and its common-type balance sheet, common-type profit and loss statement and financial ratio. Methods. By using information about an upper-level general hospital in C Province, provided by Alio(www.alio.go.kr), a public organization information provision site, Health Insurance Review & Assessment Service(www.hira.or.kr) and Ministry of Health and Welfare(www.mw.go.kr), this study analyzed 3 year's data from 2010 to 2012 and provided basic data by analyzing the ordinary characters of an upper-level general hospital system, and its common-type balance sheet, common-type profit and loss statement and financial ratio. Results. After analyzing the ordinary characters, common-type balance sheet, common-type proft and loss statement and financial ration of this general hospital, based on the 2010 to 2012 data, this study came to the following conclusions. Firstly, out of all the 1,069 hospital staff, there were 272 doctors working for 24 medical departments, out of whom the majority was 33 physicians. Most of the nurses were third-class ones, and about 2,000 outpatients and 600 inpatients on average were treated per day. Secondly, as a result of analyzing the common-type balance sheet, this study discovered that intangible assets out of fixed assets accounted for 41%, the majority, out of which usable and profitable donation asset buildings were of great importance, and the liquid assets increased more in 2012 than 2011. In the financial structure, the ratio of liquid liabilities was over 50% out of all the liabilities in 2012, and the ratio of purchase payables was high as well. The ratio of fixed liabilities reached up to 40%, out of which the retirement benefit appropriation fund was quite high. The capital was over 80%, but the surplus was in a deficit state. Compared to the capital, the ratio of total liabilities was about 90%, which indicates the financial structure of this general hospital was vulnerable. Thirdly, as a result of analyzing the common-type profit and loss statement, this study found out that the medical profits from inpatients were higher than profits from outpatients. The material cost was related to the medical quality of this general hospital, and it was as high as 30% out of the total costs and was about 45% of the labor cost. This general hospital showed 10% in the ratio of non-medical profits, and it seemed because of government subsidies. The ratios of medical profits and current net income were gradually changing for the better in 2012, compared to 2011. Lastly, as a result of analyzing the financial ratio, it was found that the liquidity ratio kept decreasing, from 110.7% in 2010 and 102.0% in 2011 to 77.2% in 2012. Besides, it was analyzed that the liquidity ratio and the net working capital ratio greatly decreased, while the quick ratio and the liquid ratio kept decreasing. Conclusions. 1. It is necessary to take the risk management into more consideration, and particularly, it is needed to differentiate and manage the levels of risk in detail. 2. By considering the fact that investments into hospital infrastructures were mostly based on liabilities, it is needed to deal with the scale of losses when evaluating risks. 3. By reflecting the character that investments into hospital infrastructures were based on liabilities, it is necessary to consider the ratio of ordinary profits as well as the ratio of operating profits to sales, and it is also important to consider sales productivity factors, such as the sales amount per a sickbed, by comparing them with other hospitals. As for limitations of this study, there may be some problems in terms of data interpretation because of the lack of information about the number of inpatients and the number of outpatients per year, which are needed for the break-even point analysis. Besides, to suggest a direction for the improvement of hospital management through analyses, non-financial factors should be reflected, such as the trend of economy, medical policies, and politic backgrounds. However, this study only focused on the common-type balance sheet, common-type profit and loss statement and financial ratio, so this study is actually limited to generalizing all the factors by analyzing public data only.

스크린 프린팅 공법을 통한 방사선 무연 차폐 시트에 관한 연구 (The Study on Filling Factor of Radiation Shielding Lead-free Sheet Via Screen Printing Method)

  • 강상식;정아림;이수민;양승우;김교태;허예지;박지군
    • 한국방사선학회논문지
    • /
    • 제12권6호
    • /
    • pp.713-718
    • /
    • 2018
  • 많은 선행 연구에서는 무연 차폐재를 제작하기 위하여 몬테카를로 시뮬레이션을 통해 방사선 차폐 능력과 경량화에 대한 가능성을 제시하고 있다. 하지만, 이는 바인더 및 미세 기공에 대한 구현이 어렵기에 제품화 공정에 필요한 정보를 충분히 제공하지 못하는 실정이다. 이에 본 연구에서는 제품화 공정에 요구되는 겔 페이스트에 대한 정보를 사전에 제공하기 위하여 스크린 프린팅 공법을 활용하여 충전율에 따른 방사선 차폐 능력에 대한 결과를 제시하였다. 본 연구에서는 방사선 차폐 능력을 평가하기 위해 IEC 61331-1: 2014와 KS A 4025에 부합하도록 실험 환경을 설계하였으며, 방사선 조사 조건은 KS A 4021 규격을 준용하여 총 여과 2.0 mmAl로 여과된 100 kVp를 이용하였다. 본 연구 결과, TVL를 기준으로 Pb $1270{\mu}m$, $BaSO_4$ $3035{\mu}m$, $Bi_2O_3$ $1849{\mu}m$, $WO_3$ $2631{\mu}m$에서 근사한 값으로 분석되었다. 또한, 충전율은 $BaSO_4$ 38.6%, $Bi_2O_3$ 27.1%, $WO_3$ 30.15%로 분석되었다. 하지만, 차후 저온고압 성형을 적용한다면 충전율을 높이면서도 기공률을 낮춤으로서 방사선 차폐 능력의 개선이 충분히 가능할 것으로 기대된다.