• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.12
• /
• pp.1674-1680
• /
• 2002

An experimental study was made of a large-scale vortical structure over a backward-facing step. The Reynolds number based on the step height was R $e_{H}$ =33,000. To recognize the large-scale vortex, three components of velocity were measured. The measurements were performed in the recirculation zone (x/H=4.0) and the reattachment zone(x/H=7.5). To measure the wall pressure fluctuations in a turbulent flow over a backward-facing step, a 32-channel microphone array was installed beneath the wall in the streamwise and spanwise directions. From the measured pressure field, the size of large-scale vortex was obtained. As a detailed study, a conditionally-averaging technique was employed to characterize the coherent structure of the large-scale vortex. To see the relationship between the flow field and the relevant spatial mode of the pressure field, the spatial box filtering (SBF) was examined. A cross-correlation between velocity and pressure fluctuations was performed to identify the structure and the length scale of the large-scale vortex.x.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.1
• /
• pp.9-18
• /
• 1999

The present study is aimed to investigate flow characteristics of two-dimensional backward-fac-ing step by numerical approach. A convection conservation difference scheme based upon SOLA algorithm is used for the solution of the two-dimensional incompressible Navier-Stokes equations to simulate the laminar transitional and trubulent flow conditions at which the experimental data can be available for the backlward-facing step. The twenty kinds of reynolds number are used for the calculations. In an effort to demonstrate that the reported solutions are dependent on the mesh refinement computations are performed on seven different meshes of uniformly increasing refinement. also to investigate the result of inflow dependence two kinds of the inflow profile are chosen for the laminar flow. Irregular grid is adopted to minimize the errors on the satis-faction fo the discretized continuity. As criterion of benchmarking the result of numerical simula-tion reattachment lengthis used for the selected Reynolds numbers. The results of the present study prove the fact that the numerical predictions agree well with the experimental data and the flow characteristics are shown at the backward-facing step.

• Journal of Sasang Constitutional Medicine
• /
• v.29 no.2
• /
• pp.128-135
• /
• 2017

Objectives The purpose of this study is to investigate economic decision-making in accordance with Sasang Constitution through Ultimatum Game. Methods 84 subjects classified as Sasang Constitution played Ultimatum Game in two session which are firstly not facing their opponents(responders) and secondly facing ones. And they were also proposed unfair offers(9:1) in the same two session. Amount of proposal and whether they accept or reject to unfair offers were observed. Results and Conclusions Taeeumin tended to offer more to his/her responder in Ultimatum Game when facing the responder then not. Taeeumin seemed to feel more burnden when he/she was facing the responder while Soyangin or Soeumin didn't.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.427-434
• /
• 2002

In Korea, there are recently many attempts to expand a temporary soil nailing system into a permanent soil nailing system since the first construction in 1993. In the downtown area, it is important that the relaxation of the ground is minimized in the ground excavation works. Due to these problems, soil nailing systems are often used the flexible facing such as shotcrete rather than the rigid facing such as SCW, CIP, and jet grout types in Korea. The soil nailing systems with rigid facings are used greatly however it is insufficient researches for design and analysis of soil nailing systems with rigid facings. In this study, various laboratory model tests are carried out to examining the influence the rigidity of facings on the global safety of soil nailing system, failure loads, displacement behaviour, axial force acting on the nails, and distribution of earth pressure. Also, the parametric studies are carried out for the typical section of soil nailed walls according to thickness of concrete facings and internal friction angle of soil using the numerical technique as shear strength reduction technique.

• Hwankyungkyoyuk
• /
• v.24 no.1
• /
• pp.26-39
• /
• 2011

The purpose of this study is to review the current state of energy education in Korea and identifies barriers faced by teachers in doing energy education. For this purpose, this study carried out a questionnaire survey targeting energy saving policy research-schools. The results of this research are as follows. First, teachers facing barriers in energy education pointed out the lack of teaching text and students' interest in energy, and work stress as main barriers. Second, teachers facing barriers in energy education rather than teachers not facing barriers are inclined to do more education at Ordinance hour and Jongrye hours. It implies that more energy education textbooks for Ordinance hour and Jongrye hours need to be developed. Third, teachers facing barriers in energy education desire more chances for training program, compared with teachers who do not feel barriers. It implies that opportunities for teacher training program need to be expanded.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.783-790
• /
• 2004

In this study, a newly modified soil nailing technology named as the PSN(pretensioned soil nailing) system, is developed to reduce both facing displacements and ground surface settlements in top-down excavation process as well as to increase the global stability. Up to now, the PSN system has been investigated mainly focusing on an establishment of the design procedure. In the present study, the analytical procedure and design technique are proposed to evaluate maximum pretension force and stability of the PSN system. Also proposed arc techniques to determine the required thickness of a shotcrete facing and to estimate probability of a failure against the punching shear. Based on the proposed procedure and technique, effects of the radius of a influence circle and dilatancy angle on the thickness of a shotcrete facing, bonded length and safety factors arc analyzed. In addition, effects of the reduction of deformations expected by pretensioning of the soil nails are examined in detail throughout an illustrative example and $FLAC^{2D}$ program analysis. And a numerical approach is further made to determine a postulated failure surface as well as a minimum safety factor of the proposed PSN system using the shear strength reduction technique with the $FLAC^{2D}$ program. Global minimum safety factors and local safety factors at various excavation stages computed in case of the PSN system arc analyzed throughout comparisons with the results expected in case of the general soil nailing system. The efficiency of the PSN system is also dealt with by analyzing the wall-facing deformations and the adjacent ground surface settlements.

• Korean Institute of Interior Design Journal
• /
• no.41
• /
• pp.104-111
• /
• 2003

Most residential buildings in Korea are preferred to have maximum interior spaces, rather than consider its original design, overall building performance, and any other aspects since early 1990's. Especially in high-rise apartment buildings, balcony has been merged to living room to get more interior spaces and this renovation trends have been producing deep and narrow shapes of living rooms that was not initially intended by architects. On the other hand, the same gross area of each unit does not necessarily mean same width and depth ratio of each residential unit. Generally, we can categorize it to the deep or wide unit based on its width and depth ratio. Under these circumstances, this study analyzes the room usage pattern changes based on the space width and depth ratio and the effect of expansion of room space to the balcony. This study also includes about 180 apartments plan case studies to find out the relationships among w/d ratio changes, furniture arrangement types, and room configurations. In this research, general apartment room w/d ratios are 0.97 ∼ 1.23; 0.7(south facing sitting room), 1.23(south facing bed room), and 0.95(north facing bedroom). But, after expanding room space to balcony w/d ratio increased as follows; sitting room become 1.31, general south facing bedroom become 1.23, and north facing bedroom become 1.45. In addition to user preference of w/d ratio, many people prefer rectangular room shape a little(w/d ratio is 0.9 or 1.2) than square style (w/d ratio is 1.0) or very deep room style (w/d ratio Is more over 1.5). Accordingly, expanding the room space to balcony may make unsatisfactory room w/d ratio. Expanding room space to balcony should be considered by existing room w/d ratio.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.3
• /
• pp.423-431
• /
• 2002

An experimental study is conducted to investigate the effect of two-frequency forcing on turbulent flow behind a backward-facing step at the Reynolds number of 27000 based on the step height. The forcing is provided from a thin slit located at the edge of the backward-facing step to increase mixing behind the backward-facing step and consequently to reduce the reattachment length. With single frequency forcing, the minimum reattachment length is obtained at the non-dimensional forcing frequency (F) of St$\_$h/ = 0.29. With two-frequency forcing, a subharmonic frequency (F/2) or biharmonic frequency (2F) is combined with the fundamental frequency (F), i.e. (F, F/2) or (F, 2F) forcing is applied. In the case of (F, F/2) forcing, the reattachment length is not much sensitive to the phase difference between F and F/2. However, the reattachment length significantly depends on the phase difference between F and 2F in the case of (F, 2F) forcing. At a certain range of the phase difference, the reattachment length becomes smaller than that of the single frequency forcing.

• Health Policy and Management
• /
• v.26 no.3
• /
• pp.172-184
• /
• 2016

Background: The objective of this study was to examine the effect of occurrence and reoccurrence of catastrophic health expenditure (CHE) on transition to poverty and persistence of poverty in South Korea. Methods: The data of the year 2008-2011 from the Korea Health Panel were used. CHE was defined as the share of total health expenditure in a household out of a household's total income at various threshold levels (more than 5%, 10%, 15%, and 20%). The effect of catastrophic expenditure on transition to poverty and persistence of poverty was analyzed through multivariate logistic regression. Results: The shares of households facing CHE at various threshold levels have increased gradually with 37.7%, 21%, 13.1%, and 9.5% in 2011. Households facing CHE were more likely to experience transition to poverty at thresholds level of more than 5% and 20% in 2010 set. Households facing CHE seemed to experience persistence of poverty, but it was not statistically significant. About 40% of households facing CHE in 2009 encountered another shock of CHE in 2010. Households without CHE seemed to experience more transition to poverty and persistence of poverty, but it was not statistically significant. For household with multiple CHE, those with medical aid were more likely to experience transition to poverty with statistical significance, but the statistical significance disappeared in case of persistence of poverty. Conclusion: The Korean health system needs to be improved to serve as a social security net for addressing transition to poverty and persistence of poverty due to facing CHE.

• Journal of radiological science and technology
• /
• v.45 no.5
• /
• pp.391-396
• /
• 2022

The purpose of this study was to investigate the effect of cross arms and palms facing forward on spinopelvic parameters during the whole spine lateral radiography. In addition, we would like to present the usefulness of a posture with the palm facing forward during whole spine lateral radiography of the spine using EOS. The subjects of this study were images of a total of 50 patients (18 males, 32 females) who whole spine lateral radiography using the conventional method and the EOS method from October 2020 to March 2021. The posture used in this study was set as 'CAP' for cross arms and 'PUSH' for posture with palms facing forward. In this study, among the spinal stability factors, thoracic kyphosis (thoracic vertebrae 4 to 12), lumbar lordosis (lumbar vertebrae 1 to sacrum 1), sagittal vertical axis, sacral slope, and shoulder flexion angle were compared on average. The mean thoracic kyphosis was 34.52±12.46° for CAP and 28.46±10.81° for PUSH (p<0.01). The lumbar lordosis of CAP was 42.45±17.45°and that of PUSH was 40.56±16.14°(p>0.57). The sagittal vertical axis was 26.59±34.34 mm in CAP and 21.21±35.41 mm in PUSH (p>0.44). In CAP, the sacral slope was 30.96±10.29°, and in PUSH, it was 31.01±10.19° (p>0.98). shoulder flexion angle was 38.31±8.24° for CAP and 26,08±6.71° for PUSH(p<0.01). As a result of this study, the PUSH posture is considered to be a posture that can minimize the shoulder flexion angle and can perform a stable examination while minimizing changes in spino-pelvic parameter.