• 제목/요약/키워드: Facility risk

검색결과 553건 처리시간 0.039초

건축물에 시설되는 수변전설비 내진설계 방안 (The Plan on the Seismic Design of Electrical Facility Installed in the Building)

  • 김기현;이상익;배석명;조성국
    • 조명전기설비학회논문지
    • /
    • 제23권2호
    • /
    • pp.89-95
    • /
    • 2009
  • 최근 한반도 주변국인 일본, 중국 등에서 크고 작은 지진 발생으로 많은 인명 및 재산 피해가 발생함에 따라 국내에서도 지진발생 추이 및 지진 피해 등 지진위험에 대한 관심이 높아지고 있다. 본 논문은 지진 발생시 건축물에서 위급상황에 대한 대처 및 여러 가지 구제 활동에 필수적인 전원공급 장치인 수변전실의 전기설비 지진 대책에 관하여 국내 현황 및 문제점을 분석하였다. 또한 국내 건축구조설계 기준과 일본의 건축전기설비 내진 설계시공 매뉴얼을 참조하여 건축물 내에 시설되는 수변전설비의 내진 설계 방향을 제시하였다. 본 논문은 전기기기 및 배관 설비 별 상세 설계 방법 제시와 설계 및 시공에 대한 신뢰성 검증을 위한 검사 기준 제시에 적용될 수 있을 것으로 사료된다.

추진시험설비의 사고피해영향분석 및 리스크 감소방안 (Consequence Analysis and Risk Reduction Methods for Propulsion Test Facility)

  • 신안태;변헌수
    • Korean Chemical Engineering Research
    • /
    • 제54권3호
    • /
    • pp.360-366
    • /
    • 2016
  • 한국형발사체 개발을 위한 추진시험설비가 구축되고 있으며, 일부 시험설비는 구축이 완료되어 추진기관시험을 실시하고 있다. 추진시험설비의 구성은 엔진 시험체 등의 시험을 실시하는 테스트 스탠드와 추진제로 사용되는 케로신(Jet A-1) 및 액체산소(LOX) 등을 저장하는 설비 등 다양한 서브시스템과 부품들이 연결되어 있다. 테스트 스탠드는 엔진개발모델이 장착되고 추진제가 혼합되어 실제 연소가 이루어지는 곳으로서 큰 에너지긴장도 상태에서 고압으로 작동되는 추진시험설비의 특성상 화재 폭발의 위험성이 존재한다. 본 논문에서는 추진시험설비의 사고피해영향분석 및 리스크 감소방안을 수립하기 위하여, 테스트 스텐드에서의 추진제 누설사고 시나리오를 가정하고, TNT당량모델 실험식을 적용하여 폭발과압에 대한 사고피해영향을 분석하였고, 추진시험설비의 안전성 확보를 위한 리스크 감소방안에 대하여 기술적, 제도적, 관리적 안전대책에 대하여 제시하였다.

e-CA(e-Consequence Analysis)를 활용한 위험설비의 비용 분석에 관한 연구 : 강관제조업 사례를 중심으로 (A Study on the Cost Analysis of risk facilities using e-Consequence Analysis - Focusing Steel pipe Industry)

  • 권혁민;황용우;이익모;천영우;최영훈
    • 대한안전경영과학회지
    • /
    • 제20권3호
    • /
    • pp.27-36
    • /
    • 2018
  • The steel pipe manufacturing industry deals with facilities and materials. Especially thermal facilities are close to vapor cloud explosion (VCE) and may cause secondary damage to facilities because they deal with corrosive substances such as hydrofluoric acid, sulfuric acid and acid, fire, explosion, leakage etc. It is in danger. In this study, hazard identification method was conducted using HAZOP techniques and quantitative risk analysis was conducted using e-CA, a program that supports accident impact analysis. Equipment in the influence range of ERPG - 3 was determined to be a facility requiring replacement. It was decided that neutralization is necessary using slaked lime. Based on the cost of loss, We presented the proper replacement which is the timing of the dangerous facility. As a result, It was ideal to replace the facilities with 20 years of heat treatment facilities, one year of hydrofluoric acid storage tank, 20 years of sulfuric acid storage tank, and 5 years of hydrochloric acid storage tank.

Quantifying Risk Factors on Cost Performance By Characterizing Capital Facility Projects

  • Jang, Myung-Hoon;Cha, Hee-Sung
    • 한국건설관리학회논문집
    • /
    • 제7권4호
    • /
    • pp.177-183
    • /
    • 2006
  • Risk-based estimation has been successfully introduced into the construction industry. By incorporating historical data associated with probability analysis, risk-based estimate is an effective decision support aid in considering whether to launch a particular project. The industry challenges, however, especially related with management issues, such as labor shortage, wage growth, and supply chain complexity, have often resulted in poor cost performance. The insufficient assessing the project characteristics (i.e., resource availability, project complexity, and project delivery method) can be the main reasons in the poor cost performance. Because the accuracy level of cost performance prediction can be enhanced by extensive evaluation of the subject project characteristics, a new approach for predicting cost performance in an earlier stage of a project can improve the Industry substantiality, in other words, value maximization. The purpose of this paper is to develop a new methodology in developing a risk-based estimate tool by incorporating extensive project characteristics. To do this, an extensive industry survey was conducted from both private and public sectors in building industry in Korea. In addition, significant project characteristics were identified in terms of cost performance indicator. Although the data collection is limited to Korean industry the suggested approach provides the industry with a straightforward methodology in risk management. As many researchers maintained that front-end planning efforts are crucial in achieving the successful outcome in building projects, the new method for risk-based estimation can Improve the cost performance as well as enhance the fulfillment in terms of business sustainability.

교육시설물의 수선교체비용에 대한 확률론적 분석 연구 (A Probabilistic Analysis on the Repair and Replacement Cost of Educational Facilities)

  • 유영진;손기영;김지명;김태희
    • 교육시설 논문지
    • /
    • 제25권1호
    • /
    • pp.3-12
    • /
    • 2018
  • Educational facilities are more uncertain about maintenance costs due to their comprehensive and long life-cycle compared to commercial buildings. In addition, maintenance of the existing post management system can not maintain the original function of education facilities continuously and economically. In order to overcome this problem, it is necessary to analyze the repair and replacement cost for the uncertainty factor in maintenance. This study propose a model to determine repair and maintenance cost and cycle of educational facility based on probabilistic estimation concept. For the analysis, Monte Carlo simulation, a probabilistic analysis method, was applied based on the repair and maintenance history data of the educational facilities in Florida. The results of this study can be used as a guideline for quantitative facility management and facility management research.

생물안전 4등급(BL4) 실험시설의 동선계획에 관한 연구 (A Study on the Circulation System of Biosafety Level 4 Laboratory Facilities)

  • 권순정;최홍빈
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제17권1호
    • /
    • pp.23-32
    • /
    • 2011
  • Recently, with the advent of high risk infectious agent such as the Ebola virus, SARS, special research facilities dealing with such dangerous pathogenic are drawing attention gradually. Especially, this kind of facilities can be called BL4(Biosafety Level 4) facility. At the moment, Korean government is going to construct BL4 institute in order to handle efficiently such kind of pathogen. However, there are no proper design guidelines for BL4 facility. This paper proposes circulation system of BL4 facility on the basis of analysis of existing BL4 guidelines of Canada, and Korean BL3 facilities. The outcomes of this study are as follows. At first, functional areas of BL4 facilities have been divided into three categories according to the hazard level ; dangerous area, transitional area, and ordinary area. Secondly, circulation system of BL4 facility has been explored as a form of diagram according to the circulating subjects. These include human, laboratory animals, hazardous pathogen, equipments and cloth. This study has some limitations in that it lacks empirical evidences and concrete SOPs(Standard Operating Procedure). Despite of some weaknesses, it is expected to give some preliminary guidelines for the design of circulation system in BL4 facilities.

Specific Process Conditions for Non-Hazardous Classification of Hydrogen Handling Facilities

  • Choi, Jae-Young;Byeon, Sang-Hoon
    • Safety and Health at Work
    • /
    • 제12권3호
    • /
    • pp.416-420
    • /
    • 2021
  • Hazardous area classification design is required to reduce the explosion risk in process plants. Among the international design guidelines, only IEC 60079-10-1 proposes a new type of zone, namely zone 2 NE, to prevent explosion hazards. We studied how to meet the zone 2 NE grade for a facility handling hydrogen gas, which is considered as most dangerous among explosive gases. Zone 2 NE can be achieved considering the grade of release, as well as the availability and effectiveness of ventilation, which are factors indicative of the facility condition and its surroundings. In the present study, we demonstrate that zone 2 NE can be achieved when the degree of ventilation is high by accessing temperature, pressure, and size of leak hole. The release characteristic can be derived by substituting the process condition of the hydrogen gas facility. The equations are summarized considering relation of the operating temperature, operating pressure, and size of leak hole. Through this relationship, the non-hazardous condition can be realized from the perspective of inherent safety by the combination of each parameter before the initial design of the hydrogen gas facility.

도시 국제화를 위한 플랫폼으로서 외국인 커뮤니티 시설의 역할에 관한 연구 - 서울시 글로벌센터를 중심으로 - (Roles of the Community Facilities for Foreigners as a Platform for Urban Globalization - Focused on the Seoul Global Centers -)

  • 최성진;한순생
    • 대한건축학회논문집:계획계
    • /
    • 제35권6호
    • /
    • pp.81-92
    • /
    • 2019
  • Globalization has diversified ethnic composition thus increased the risk of conflicts and socio-political instability in global cities. However, still the status of community facility in a global city is unclear despite its critical role to build sustainable community in global era. In Seoul, as a reaction of globalization, 19 community facilities known as the 'Seoul Global Center' have been established since 2007 by Seoul Metropolitan Government. These facilities have started to provide basic foreigner services but been transformed to foreigner service hub with multiple functions in terms of a living, a business, a labour, etc. This study explores the role of the community facility for foreigners by using the Seoul Global Center as a case study, conducting a site observation, an interview(13 staff) and a questionnaire(148 visitors). The findings are the community facility functions as a 'global platform' in forms of a policy tool for implementing the urban globalization strategy, a mediator connecting foreign migrants with local communities, an applicant for successful settlement of foreign residents, an incubator that grows human and social capital, and a base for collecting and aggregating information on foreign migrants and forming new local identities.