• 제목/요약/키워드: Facility maintenance

검색결과 872건 처리시간 0.029초

직류 커패시터 노후화에 따른 PV 인버터 동작 (PV Inverter Operation according to DC Capacitor Aging)

  • 윤용호
    • 한국인터넷방송통신학회논문지
    • /
    • 제23권2호
    • /
    • pp.149-155
    • /
    • 2023
  • 태양광 발전은 신재생에너지 중 가장 친숙한 발전시설로 약 10여 년 전부터 보급이 확대되기 시작해 현재 시점에서는 시스템의 유지보수관리에 대한 해결 및 기술에 관한 관심이 높아지고 있다. 특히 태양광 발전시스템의 이상 유무 및 부품 교체시기 그리고 시스템의 종합효율을 최대화할 수 있는 대책이 필요하다. 태양광발전시스템의 한 요소인 PV 인버터는 전력용 스위칭 소자에 의존하는 전력변환 시스템으로 DC/DC 컨버터 및 DC-AC 인버터 구성에 따른 직류(DC-Link) 커패시터가 사용된다. 이러한 직류 커패시터 역시 장시간 사용에 따른 노후 및 열화로 인해 PV 인버터의 발전량 감소와 전력손실 그리고 고조파(THD, 교류출력전류 종합왜형률) 증가로 신재생에너지 설비를 통한 계통 안전성(Safety)에 영향을 미치는 요인으로 분석할 수 있다. 따라서 본 논문에서는 태양광발전시스템에서 현재 운영 중인 직류 커패시터 용량 상태에 따른 PV 인버터 동작 특성을 고찰함과 동시에 신재생에너지 설비의 안전성 및 신뢰성을 확보할 수 있도록 연구내용을 제안하였다.

소규모 공공시설 조사시 세천의 위험도 평가 방안 (Risk Assessment Improvement Method of Small Stream When Small Sized Hazard Infrastructures Survey)

  • 노정수;전계원;신재성
    • 한국방재안전학회논문집
    • /
    • 제16권1호
    • /
    • pp.23-35
    • /
    • 2023
  • 최근 기후변화로 인한 태풍, 국지성 집중호우 등 자연재해에 의한 피해가 급증하면서 행정안전부에서는 「소규모 공공시설 안전관리 등에 관한 법률(2016 개정)」을 제정하고 각 지자체별로 소규모 공공시설을 조사하여 국가재난안전관리시스템(NDMS)에 등록하고 매년 3월 31일까지 안전점검을 실시하고 있다. 이를 위해 최근 각 지자체별로 소규모 공공시설 안전점검 및 정비계획 수립 용역이 발주되어 세천, 소교량, 농로, 마을진입로, 취입보, 낙차공의 6가지 유형의 시설물을 조사하여 DB화 하고, 각 시설물별 위험도 평가를 수행하여 위험시설의 경우 정비계획을 수립하고 있다. 그러나 현재까지 배포된 소규모 공공시설의 위험도 평가 방법은 현장조사자의 육안조사를 통해 이루어지고 있으므로, 위험도 평가가 주관적이고 모호한 형태로 이루어지고 있는 실정이다. 이에 본 연구에서는 소규모 공공시설 중 재해위험도가 가장 높은 세천에 대하여 위험도 정량평가지표를 제시함으로써 합리적이고 정량적인 위험도 평가가 이루어질 수 있도록 하였으며, 이를 통해 소규모 위험시설을 선정하여 정비계획 및 시행계획 수립에 있어 투명한 근거자료를 확보할 수 있도록 하였다.

국내 제조업 화재감시자 운영 실태 분석 - 개정 산업안전보건법 중심 (Analysis of the Operation of Fire Observers in the Domestic Manufacturing Industry - Focusing on the Revised Occupational Safety and Health Act)

  • 김경민;서용윤;이종빈;장성록
    • 한국안전학회지
    • /
    • 제38권3호
    • /
    • pp.77-84
    • /
    • 2023
  • Welding and cutting, which are representative tasks in handling firearms at industrial sites, are the basis for production and maintenance processes across all industries. They are also essential in the root industry. Specifically, they are widely used in the manufacturing industry, including equipment industries such as shipbuilding, automobiles, and chemicals, and subsequent maintenance work and general facility repair. However, such hot work carries a high fire risk owing to sparks scattering and inadequate management, resulting in a high occurrence of accidents. In response, the government and relevant organizations have recently revised the Occupational Safety and Health Act to prevent accidents during hot work. These revisions impose more stringent regulations than before, which are expected to help prevent actual fire accidents. However, whether the fire observer system, which is the core element of the revision, would be practically applied and maintained is unclear. Therefore, this study compared the fire observer system in the revised Occupational Safety and Health Act with those in the laws and systems of developed countries, conducted interviews with safety and health experts to assess the suitability of the new system for fire observer operations, and improvement plans were derived accordingly. Therefore, the laws and systems of developed countries grant more authority to fire observers compared with those of Korea. Moreover, professional training in handling emergency is required. Interviews with safety and health experts revealed that regardless of company size, the same operating standards were applied, and standards for deploying fire observers in various locations were unclear. Furthermore, there was a lack of professional education and training, and the role and authority of fire observers were limited. These findings revealed a problem in this sector. The results of this study are expected to serve as basic data for establishing a practical system for placing fire observers and supplementing laws, guidelines, and systems for preventing fire accidents.

A FUNDAMENTAL STUDY TO DEVELOP STANDARD TECHNOLOGY CRITERIA FOR IT-CONSTRUCTION FUSION TECHNOLOGIES, TO BE APPLIED TO A U-CITY

  • Kyoon-Tai Kim;Jae-Goo Han;Chang-Han Kim
    • 국제학술발표논문집
    • /
    • The 3th International Conference on Construction Engineering and Project Management
    • /
    • pp.1352-1358
    • /
    • 2009
  • As the demand for a convergence between construction technologies and IT is on the rise, as seen in the visualization of U-City construction, studies on the ways in which IT in should be utilized in the building and construction field have been continuously and actively performed. However, there has been almost no development of standardized technology criteria relating to the life cycle of a building (planning, design, construction, and maintenance). That is, there are almost no examples of efforts made to combine construction technology and IT in a fundamental way, considering the environment, the facility, its spatial characteristics, engineering, materials, and structure, aspects that are commonly required not only for interior spaces but also for exterior construction of U-City. Despite the fact that a state-of-the-art infrastructure has been built, and the competency of users with the cutting-edge technology, composite studies on technologies, facilities, services and spaces are still lacking, and basic research on the composite operation method including compatibility and linkage between facilities and services within a U-City has been insufficient as well. It is generally known that by fusing IT with construction technologies, the total period of construction taken can be reduced and construction expenses can be curtailed, while construction quality can be improved. For this reason, it is vital to prepare a standardized base to connect cutting-edge IT with the construction technologies. In preparing such a base, the most urgent issue is to develop standardized technology criteria. The ultimate objective of this research is to establish the technological criteria system required to apply construction-IT fused technologies to U-Cities, and to develop the technological criteria for the design, construction and maintenance of the U-Cities. This paper, whose objective is to establish development strategies for construction-IT fused technologies by way of analyzing the criteria for conventional construction projects, the necessity of criteria for construction-IT fused technologies, and the current status of U-Cities' development, is the underlying research for this purpose. The strategies established are expected to be utilized in establishing the system of criteria for construction-IT fused technologies, and to contribute to a knowledge base in the construction-IT field. In addition, based on the strategies established, criteria for construction-IT fused technologies, such as design criteria and construction standards, will be developed, and by applying these criteria and standards, the ultimate objectives of U-Cities, which are the enhancement of urban competitiveness and the satisfaction of residents, will be attained

  • PDF

결합된 초음파-충격 반향 기법 기반의 일반 지하구 구조체의 건전도 평가에 관한 실험적 연구 (Experimental study on structural integrity assessment of utility tunnels using coupled pulse-impact echo method)

  • 김진;방정욱;심승보;조계춘
    • 한국터널지하공간학회 논문집
    • /
    • 제25권6호
    • /
    • pp.479-493
    • /
    • 2023
  • 터널과 공동구와 같은 지하구조물의 공용연수가 증가하고 노후화로 인한 사고로 인하여 안전 관리의 필요성이 대두되고 있다. 다만, 민간이 관리 주체인 일반 지하구의 경우 시설물 안전 및 유지관리 세부지침이 미흡하여 안전 관리가 부실한 상황이다. 또한 일반 지하구는 기본 설계 정보가 부족하고 안전 관리자가 안전 진단을 수행하기 위한 공간이 협소하여 기존 비파괴 검사법들의 적용에 한계가 있다. 따라서 본 연구에서는 박스형 일반 지하구의 안전 진단을 위한 기초 자료로 사용될 수 있는 구조물의 두께·철근 유무와 철근 깊이·내부 결함의 유무 및 깊이 등을 판단할 수 있는 품질 평가를 위한 초음파법과 충격 반향 기법 바탕의 비파괴 검사 방법을 제안하였다. 일반 지하구의 실제 현장 조건에서의 제안한 방법의 유효성을 검토하기 위해 콘크리트 벽체 모형 실험체들을 제작하여, 본 연구를 통해 제안한 방법론을 검증하였다. 초음파 신호와 충격 신호를 활용하여 신호를 인가하여, 다채널로 구성된 가속도계를 통해 신호를 수집하고, 최종적으로 모사된 시편의 두께 및 내부에 삽인 된 철근과 구현된 결함의 깊이를 도출하였으며, 실측치와의 비교를 통해 예측한 깊이가 설계한 깊이와 효과적으로 부합하는 것을 확인하였다. 본 연구 결과를 통해 일반 지하구 현장에서 활용할 수 있는 안전 진단 방법의 도출에 기여할 것으로 기대된다.

붕괴방지수준(CLE)을 적용한 콘크리트 댐 피어부 내진성능평가 방안 개선 (Improvement of Seismic Performance Evaluation Method for Concrete Dam Piers by Applying Collapse-Level Earthquake(CLE))

  • 오정근;정영석;권민호
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제28권1호
    • /
    • pp.1-11
    • /
    • 2024
  • 이 논문의 목적은 붕괴방지수준의 지진력을 적용한 콘크리트 댐 피어부 동적해석 시 합리적인 댐 축방향 지진하중 재하 방법, 내하력 평가 방법 등에 대한 적용방안을 제시하는 것이다. 이를 위하여 콘크리트 댐 피어부를 대상 시설로 선정하여 다양한 위어부 폭을 적용한 동적해석을 통해 위어부 댐 축방향 동적거동 특성을 분석하고 'U.S. Army Corps, 2007'제시하는 RC수력구조물 평가기법을 적용하여 내하력 평가를 수행하였다. 연구결과 피어부 댐 축방향 지진력 적용 시 위어부 댐 축방향은 강체거동으로 가정하는 것이 보다 현실적이고 'U.S. Army Corps, 2007'에서 제시하는 모멘트와 전단에 대한 내하력 검토방법이 합리적인 것으로 판단되므로 현행 평가방법의 개선이 필요한 것으로 결과가 도출되었다. 연구 결과 개선사항을 적용할 경우 CLE를 적용한 현행 내진성능평가 방법보다 합리적인 평가결과를 도출하는 효과가 있을 것이다. 피어부에 발생하는 비틀림 모멘트에 대해서는 향후 추가적인 연구가 필요한 것으로 판단된다.

비보강 조적조 건축물의 외부 보강에 따른 내진성능 연구 (A Study on Seismic Performance of External Reinforcement for Unreinforced Masonry Buildings)

  • 김종연;강종
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제28권2호
    • /
    • pp.43-52
    • /
    • 2024
  • 내진설계 되지 아니한 조적조 건축물의 내진성능을 평가하고 건축물의 외부에 내진 보강 공법을 채택하여 내진성능을 향상시키고자 하였다. 내진성능을 평가하기 위해 건축물 내진설계 기준 및 해설(KDS 41 17 00 : 2019)과 기존 시설물(건축물) 내진성능 평가요령을 적용하였으며 비선형 정적해석으로 pushover해석을 수행하였다. 해석결과, 우리나라 주택의 내진설계 보급 비율이 낮고 주택의 많은 비중을 차지하고 있는 것이 조적조 건축물임을 고려하면 내진보강이 시급한 것으로 판단되었다. 조적조 건축물에 철골 보-기등+가새 프레임을 보강할 경우 층간 변형각은 X방향 0.043%이며 Y방향 0.047%로 나타나 규정을 만족하였다. 성능 수준별 중력하중 저항능력은 X, Y방향 모두 거주가능으로 판정되어 안전한 것으로 판단되었다. 건축물의 외부에 보강함으로써 주택의 거주성과 편의성을 확보하면서 공사가 가능할 것으로 보여지며 지진성능과 구조물의 거동을 보다 명확하게 예측할 수 있을 것으로 사료 되었다.

Study on Cooling Characteristics of the Tunnel Type Pressure Pre-Cooling System

  • Lee W. O.;Yun H. S.;Lee K. W.;Jeong H.;Cho K. H.;Cho Y. K.;Lee J. H.
    • Agricultural and Biosystems Engineering
    • /
    • 제4권2호
    • /
    • pp.58-65
    • /
    • 2003
  • An understanding of the cooling requirements of horticultural commodities begins with adequate knowledge of their biological responses. All fresh horticultural products are living organisms, carrying on the many biological processes that are essential to the maintenance of life. The pre-cooling is essential technique for the construction of cold chain system, which is necessary to maintain marketing quality of fresh produces during the transportation and distribution. The purpose of this study is to develop the pressure cooling tunnel using conveyer for the reduction of labor and improvement of pre-cooling efficiency. Performance of developed facility was tested for the strawberries, tomatoes and Chinese cabbages. Cooling ratio as a result of pre-cooling efficiency was 1.57, 1.56 and 1.32 for strawberries, tomatoes, and Chinese cabbages respectively. Cooling ratio decreased with increasing the distance of heat conduction from surface to center. The cooling ratio of Chinese cabbages was lower than that of fruit because of its head and leaf. In aspect of cooling uniformity, there was no significant difference of final temperature among inlet, outlet and middle layers of cold air in fresh produces. After pre-cooling treatment, quality changes were measured for the weight loss, Vit. C content, and titratable acidity. The quality of pre-cooling treatment was better than that of non-treatment and was kept on well during long-term storage.

  • PDF

의료영상장치의 전자파 안전에 대한 연구 (A Study on the Safety of Electromagnetic Wave of Medical Imaging System)

  • 선종률;이원정;임재동
    • 대한안전경영과학회:학술대회논문집
    • /
    • 대한안전경영과학회 2010년도 추계학술대회
    • /
    • pp.103-112
    • /
    • 2010
  • This study was done to provide basic data on the safety of professionals in medical imaging system by measuring the electromagnetic waves generated in the medical imaging system being used in medical organization. The studied medical imaging systems were general X-ray system, computed tomography(CT), ultrasonographic system, magnetic resonance imaging(MRI), PET-CT and fluoroscopic system, and through these devices, electric field and magnetic field were measured and analyzed. As a result of the analysis, the measured values classified by the medical organizations were not much significant, but in the measurement by the medical imaging systems, there were high hazard elements in the sequential order of electric field PET-CT($17.7{\pm}22.9$)v/m, CT($10.3{\pm}8.7$)v/m, general X-ray system ($8.8{\pm}8.8$)v/m, magnetic field general X-ray system($5.06{\pm}8.26$)mG, CT($2.71{\pm}4.53$)mG and PET-CT($0.74{\pm}0.34$)mG, the systems that adopted X-ray as main ray source, and the more aged the medical imaging systems, the greater the effects of electro-magnetic waves($10.6{\pm}15.93v/m$ for 5 years or more, $6.14{\pm}5.60v/m$ for 5 years or less). The effects of electromagnetic waves on medical imaging systems or facilities were not much when the notification of ministry of knowledge economy is considered, but in the overall perspective considering all the equipments and facility of the medical organization, such effects were significant. It is determined that sustainable safety managements of electric field and magnetic field must be done during process from medical imaging system installation to maintenance to rule out such factors.

  • PDF

선형기반 시설물을 위한 Flexible BIM 시스템의 설계 (Design of Flexible BIM System for Alignment-Based Facility)

  • 이승수;이민주;정종윤;서종원
    • 대한토목학회논문집
    • /
    • 제34권2호
    • /
    • pp.677-685
    • /
    • 2014
  • 최근 건설 산업은 BIM (Building Information Modeling)의 도입으로 인하여 많은 혜택을 얻고 있다. 하지만 도로나 철도와 같은 선형기반 설계공종의 경우는 구간별 표준횡단면의 정의와 선형의 배치를 통한 서피스(surface)모델을 생성함으로써 3차원 설계가 이루어지나, 현재 설계 소프트웨어에서 제공되는 횡단면 설계요소가 제한적이거나 국내실정에 맞지 않은 점이 많고, 생성된 서피스모델은 선형구간의 시 종점에 대해 일체화 되어있어 공정, 물량, 단가 등의 BIM 소요정보와 세분화된 연계를 위해서는 모델 수정 등의 많은 후속작업이 필요하다. 본 논문에서는 이러한 문제점을 해결하기 위하여 3D 선형기반설계가 적용되는 사회기반시설물을 대상으로 3차원 모델의 분절 및 속성정보의 운용이 자유로운 '선형기반 인프라시설물을 위한 Flexible BIM 시스템'의 설계를 통하여 BIM의 활용성을 극대화 하는 것을 목표로 한다.