• Archives of Plastic Surgery
• /
• v.40 no.5
• /
• pp.510-516
• /
• 2013

Background This paper discusses the treatment protocol for patients with frostbite. Methods We performed a retrospective analysis of a series of 17 patients with second- and higher-degree frostbite who had been treated at our medical institution between 2010 and 2012. Results Our clinical series of patients (n=17) included 13 men and four women, whose mean age was $42.4{\pm}11.6$ years (range, 22-67 years). The sites of injury include the foot in six patients (35.3%), the hand in six patients (35.3%) and the facial region in five patients (29.4%). Seven patients with second-degree frostbite were completely cured with only conservative treatment during a mean period of $12.7{\pm}3.3$ days (range, 8-16 days). Of the five patients with third-degree frostbite, two underwent skin grafting following debridement, and the remaining three achieved a complete cure with conservative treatment during a mean period of $35{\pm}4.3$ days (range, 29-39 days). Five patients with fourth-degree frostbite were treated with surgical procedures including amputation. Conclusions With the appropriate conservative management in the early stage of onset, surgeons should decide on surgery after waiting for a sufficient period of time until the demarcation of the wound. Continuous management of patients is also needed to achieve functional recovery after a complete cure has been achieved. This should also be accompanied by patient education for the avoidance of re-exposure to cold environments.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.1
• /
• pp.23-36
• /
• 1999

Medimin A is a derivative of vitamin A which has been developed by coupling retinoic acid with polyethylene glycol(PEG) to enhance skin permeability and stability. We carried out the collagen synthesis and clinical test to examine the reducing effect of wrinkles by Medimin A. In vitro collagen synthesis was evaluated by quantitative assay of ($^3$H)-proline incorporation into collagenase sensitive protein in fibroblast cultures. Clinical test was evaluated by image analysis of skin replica, visual observation and self-estimated response of volunteers for 10 weeks. Medimin A stimulated about 40% in collagen synthesis. The area of main deep wrinkle on the skin replica was reduced 38.4% with topical application of O/W emulsion containing 0.2% Medimin A. The wrinkles on the eye region was also reduced 25.4%-44.1% by the visual observation and 93% of all volunteers responded that topical application of the O/W emulsion was showed some reducing effect of wrinkles after 10 weeks. From these results, we suggest that Medimin A is a potent anti-wrinkle agent by objective evaluation methods(in vitro collagen synthesis and image analysis of skin replica) and subjective evaluation methods(visual observation and self-estimated response of volunteers).

• Imaging Science in Dentistry
• /
• v.42 no.3
• /
• pp.175-182
• /
• 2012

Purpose: The aim of this study was to provide sex-matched three-dimensional (3D) statistical shape models of the mandible, which would provide cephalometric parameters for 3D treatment planning and cephalometric measurements in orthognathic surgery. Materials and Methods: The subjects used to create the 3D shape models of the mandible included 23 males and 23 females. The mandibles were segmented semi-automatically from 3D facial CT images. Each individual mandible shape was reconstructed as a 3D surface model, which was parameterized to establish correspondence between different individual surfaces. The principal component analysis (PCA) applied to all mandible shapes produced a mean model and characteristic models of variation. The cephalometric parameters were measured directly from the mean models to evaluate the 3D shape models. The means of the measured parameters were compared with those from other conventional studies. The male and female 3D statistical mean models were developed from 23 individual mandibles, respectively. Results: The male and female characteristic shapes of variation produced by PCA showed a large variability included in the individual mandibles. The cephalometric measurements from the developed models were very close to those from some conventional studies. Conclusion: We described the construction of 3D mandibular shape models and presented the application of the 3D mandibular template in cephalometric measurements. Optimal reference models determined from variations produced by PCA could be used for craniofacial patients with various types of skeletal shape.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.3
• /
• pp.319-329
• /
• 2000

Prediction of the soft tissue changes following hard tissue movement is very important from the esthetic view point for patients who have orthognathic surgery. There are many cephalometric analysis of facial bone and soft tissue on the lower lip and chin region but few soft tissue analysis on the midface after mandibular setback surgery. This study was performed to obtain whether the mandibular posterior movement has influence on the midface and the predictable ratio of post-operative measurement values of the soft tissue changes following mandibular setback surgery. Fifteen patients (8 males and 7 females) who had undergone mandibular setback surgery were selected and analyzed the soft tissue movement on the upper lip and the cheek region. Post-operative changes of the soft tissue measurements after mandibular surgery were examined on pre- and post-operative cephalometrics and the ratio of changes were analyzed after drawing the reference line on the face with the barium sulfate solution. The reference lines were perpendicular to the intercanthal line from infraorbital foramen and lateral canthus. The results obtained were as follows : 1. There were tendancy of anterior movement of soft tissue adjacent the nose after mandibular surgery 2. There were incerased tendancy of the amount of anterior movement from the nasal crease to the cheek region. 3. The amount of anterior movement of the soft tissue was larger below the palatal plane compared with above the palatal plane in the cheek region. 4. The upper lip length was increased and moved posterior direction after mandibular setback surgery 5. The lower lip was moved posterior direction by posterior movement of the mandibular structure 6. Soft tissue of the midface around the nose moved anterior direction after mandibular setback surgery but there was no correlation between the amount of mandibular setback and the amount of the soft tissue changes

• International Area Studies Review
• /
• v.12 no.3
• /
• pp.321-339
• /
• 2008

The purpose of this study to the analyze characteristics and purchasing activities of consumers by using the Multinomial Logit model, which is a well-known discrete selection model to explain and forecast consumers' selection activities(patterns). The study aims to determine the state of competition between National Brand and Private Band and how some demographic characters and marketing variables influence consumers' brand selections within the facial tissue market. Our analysis process includes reorganization of panel data(individuals' purchasing record at each point) to fit the purpose of our study as well as analysis of probability and influencing factors of consumers' brand selection at each point of purchases. The result showed that consumers at higher age and with higher income hold better probability to purchase National Brand. Likewise, locations also had considerable effect on selecting brand, and Private Brand was preferred in department store and discount stores. On the other hand, consumers loyal to National Brand reported higher probability to purchase if the product prices were higher while Private Brand buyers were more promoted the purchase under price discount.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.74-80
• /
• 2021

This study investigated the process quality level of a K5 gas mask, which recently acquired its operational capability, through statistical process analysis for the mass production stages and their lots. The tensile adhesion strength was the only operating requirement in the manufacturing process of the K5 gas mask. For this purpose, the results of tensile adhesion strength between the lens and facial rubber during the initial and second mass production stages were analyzed using conventional statistical and statistical process analysis methods. The conventional statistical results indicated that the second mass production stage was better than the initial mass production stage. In cases of a control chart and process capability of tensile adhesion strength, the process quality level was also improved by following the mass production stages. The improvement was caused by process stabilization and work skill elevation. These results and methods are expected to be conducted and utilized in the third mass production stage. Moreover, quality improvement of K5 gas mask mass production can be achieved using the Lean 6 sigma procedure, MDAIC (Define, Measure, Analyze, Improve, Control).

• Journal of Broadcast Engineering
• /
• v.25 no.6
• /
• pp.973-979
• /
• 2020

This study aims to objectively and quantitatively determine the social emotion of empathy by collecting pupillary response. 52 subjects (26 men and 26 women) voluntarily participated in the experiment. After the measurement of the reference of 30 seconds, the experiment was divided into the task of imitation and spontaneously self-expression. The two subjects were interacted through facial expressions, and the pupil images were recorded. The pupil data was processed through binarization and circular edge detection algorithm, and outlier detection and removal technique was used to reject eye-blinking. The pupil size according to the empathy was confirmed for statistical significance with test of normality and independent sample t-test. Statistical analysis results, the pupil size was significantly different between empathy (M ± SD = 0.050 ± 1.817)) and non-empathy (M ± SD = 1.659 ± 1.514) condition (t(92) = -4.629, p = 0.000). The rule of empathy according to the pupil size was defined through discriminant analysis, and the rule was verified (Estimation accuracy: 75%) new 12 subjects (6 men and 6 women, mean age ± SD = 22.84 ± 1.57 years). The method proposed in this study is non-contact camera technology and is expected to be utilized in various virtual reality with smart glasses.

• Korean Journal of School Psychology
• /
• v.17 no.3
• /
• pp.357-377
• /
• 2020

This study was intended to develop and investigate reliability and validity of a scale that can measure linkage capability of community resources of counselors. This study prepared a preliminary question consisting of a total of 42 questions in 5 areas. Then, the content validity and facial validity were verified by the counseling experts with a first-degree qualification as a counselor in Korean Counselling Psychological Association, and a total of 20 final questions of 4 areas. The final questions were conducted on psychological counselors(N=306) to investigate reliability and validity. As a result of conducting an exploratory factor analysis, validity of the two-factor structure have been verified. And In the confirmatory factor analysis, two factors were shown to be appropriate. The two-factors were named 'The collection and utilization of information' and 'Association with the Organization of Information'. Also, the scale of final selection of questions were found to have a good degree of concurrent validity, interitem consistency and test-retest reliability. The implications of the present study is significant in that it is a measure of community resources linkage capability scale of counselors. In addition, this scale is expected to be useful in Wee Class, Wee Center, Youth Counseling Welfare Center, and other counseling sites.

• The korean journal of orthodontics
• /
• v.30 no.1 s.78
• /
• pp.43-52
• /
• 2000

Hemifacial microsomia ( HFM ) is the second most common craniofacial abnormalies. HFM represnted a spectrum of clinical findings such as hypoplasia of the mandibular ramus and condyle, confinement of maxilla growth, external and/or middle ear defects, involvement of some cranial suture, buccal soft tissue, facial nerve, and muscles in the affected side. HFM often showed progressive facial asymmetry and occlusal plane slanting to the affected side with growth. There were several reports about asymmetry of tooth maturation, hypodontia, delayed eruption, enamel hypoplasia in HFM. Since teeth develope in close association with size and morphology of the maxillary and the mandible, it is highly likely that dental changes will be present in HFM. So the Purpose of this study was to investigate the differences of the primary and the permanent teeth dimensions in the maxillary and the mandibular dentition between the affected and the non-affected side of HFM.. The sample of this study consisted of 34 unilateral HFM Patients (18 males and 16 females, average age : 5 year 11 months old). The authors examined the mesiodistal and the faciolingual dimensions of the primary and the permanent teeth and performed statistical study by using paired t-test. The results were as follows 1. The mesiodistal dimensions of the mandibular second primary molar and the mandibular first permanent molar in the affected side of HFM were significantly smaller than those of non-affected side. But there were no significant differences in the anterior teeth and the mandibular first primary molar. It means that a gradient of severity from anterior teeth to posterior teeth was found in the mandibular dentition. 2. Although there were no significant differences in the faciolingual dimensions of the primary and the permanent teeth in the maxillary and the mandibular dentition between the affected and non-affected side of HFM, there were general trend of compensatory increase in faciolingual dimension of the mandibular primary and the permanent teeth in the affected side Therefore these results showed that HFM might affect on the abnormality of tooth dimension, especially the most posterior teeth, in the affected side of the mandible.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.147-152
• /
• 2013

Purpose: The aim of this study was to propose the position of maxillary anterior teeth and intercanine width measurements based on the incisive papilla in accordance with the cephalic type and gender of dentate Korean adult with normal teeth alignment. Materials and methods: 42 students with Class I normal occlusion, without crowding or spacing, were selected from the Chonnam National University School of Dentistry. The lateral skull radiographs of the subjects were taken and were classified as different cephalic types, based on their PFH / AFH ratios. 42 casts of their maxilla were prepared and both the distance between the upper central incisors and the middle of the incisor papilla was measured with a vernier caliper (A) and the distance between the maxillary canine cusp tips (B) were measured. Statistical analysis was performed using SPSS version 15 and their significance was investigated. Results: For dolichocephalic group, the mean values for A and B were 8.43 (SD: 0.61) and 36.73 (SD: 2.17), respectively. The mean value for A was 8.51 (SD: 1.27) for the mesocephalic group and 8.76 (SD 1.03) for the brachycephalic group. The mean value for B was 35.91 (SD: 1.86) for the mesocephalic group and 37.34 (SD: 2.23) for the brachycephalic group. For the male group, the mean A value was 8.86 (SD: 1.04) and the mean B value was 37.60 (SD: 0.24). For the female group, the mean A value was 8.41 (SD: 0.93) and the mean B value was 36.18 (SD: 2.01). The difference between male and female group in A values were not statistically significant (P>.05). The B values of the male subjects were greater than those of the female subjects and was statistically significant (P<.05). Conclusion: 42 students with normal dentition and occlusion in korea, the distance from the incisive papilla and the incisal edge of maxillary central incisors had no difference in cephalic type or gender. However, the distance between the cusp tip of both canines had significant difference in gender where the male showed higher values than the female, while having no difference in cephalic types.