• Journal of Technologic Dentistry
• /
• v.27 no.1
• /
• pp.27-39
• /
• 2005

This study is to show the qualitative analytic methods of facial asymmetry with three-dimensional morphometry and find out asymmetry change resulted from enlarging three local regions. Steel balls (1.2mm in diameter) were attached in twenty seven landmarks of a symmetrical artificial human skull. This artificial human skull was used as experimental materials. Twelve different asymmetrical artificial human skulls were formed by gradually enlarging the mandibular body length, gonial angle, and ramus height of the left hemiface. From the three-dimensional morphometry of each skull type, nine local area measurements and three total sum area measurements(representing the mandibular area, maxillary area, and lower facial area) were acquired and made into the surface area asymmetry degree. Menton deviation itself was used as the surface area asymmetry degree while right-left percentages were used in the other measurements. These surface area asymmetry degrees were compared with each other to find out asymmetry change according to the degree of actual facial asymmetry. Through the statistical analysis, following results were obtained. The results were as follows: 1. Left maxillary area of artificial human skull was 7.13$\pm$0.26% larger while mandibular area was 4.14$\pm$0.12% smaller than each those of right hemiface. After all, left lower facial area was 1.44$\pm$0.07% larger than those of right hemiface.(n=7). 2. Among the reduce rates of surface area asymmetry degree resulted from enlarging three local regions, ramus height was similar to mandibular body length while it was bigger than those of gonial angle. 3. Among the increase rates of menton deviation resulted from enlarging the local regions, ramus height was the biggest, mandibular body length was the second and gonial angle was the smallest. These results suggest that three-dimensional morphometry can be used to qualitatively analyse facial asymmetry and the asymmetry degree is more influenced by enlarging the ramus height, mandibular body length than those of gonial angle.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.2 no.1
• /
• pp.23-27
• /
• 1972

A roentgenographic cephalometric study was made on the soft and hard tissue profile of Korean adults. The subject consisted of 52 males and 54 females from 17 to 22 years of age and with normal occlusion and acceptable profile. Twenty one landmarks were plotted and two oriented lines named SnH line and SnV line were drawn on the tracings of all cephalograms. The means and the standard deviations from the subjects were calculated in each measuring category and the means were compared with those of male and femal samples. The results were obtained as follow: 1. In depth and height, individual variations and sex differences of the lower facial profile were larger than the upper face. 2. The sex differences of upper facial profile were larger in height than depth. 3. The individual variations and sex differences of the top of nose were the smallest in all measuring points. 4. The thickness of the soft tissue of upper face and upper lip in male sample were larger than those of female, but the same matter were not found in mental region.

• Imaging Science in Dentistry
• /
• v.51 no.3
• /
• pp.279-290
• /
• 2021

Purpose: Using images in the facial image comparison process poses a challenge for forensic experts due to limitations such as the presence of facial expressions. The aims of this study were to analyze how morphometric changes in the face during a spontaneous smile influence the facial image comparison process and to evaluate the reproducibility of measurements obtained by digital stereophotogrammetry in these situations. Materials and Methods: Three examiners used digital stereophotogrammetry to obtain 3-dimensional images of the faces of 10 female participants(aged between 23 and 45 years). Photographs of the participants' faces were captured with their faces at rest (group 1) and with a spontaneous smile (group 2), resulting in a total of 60 3-dimensional images. The digital stereophotogrammetry device obtained the images with a 3.5-ms capture time, which prevented undesirable movements of the participants. Linear measurements between facial landmarks were made, in units of millimeters, and the data were subjected to multivariate and univariate statistical analyses using Pirouette^® version 4.5 (InfoMetrix Inc., Woodinville, WA, USA) and Microsoft Excel^® (Microsoft Corp., Redmond, WA, USA), respectively. Results: The measurements that most strongly influenced the separation of the groups were related to the labial/buccal region. In general, the data showed low standard deviations, which differed by less than 10% from the measured mean values, demonstrating that the digital stereophotogrammetry technique was reproducible. Conclusion: The impact of spontaneous smiles on the facial image comparison process should be considered, and digital stereophotogrammetry provided good reproducibility.

• The korean journal of orthodontics
• /
• v.4 no.1
• /
• pp.21-29
• /
• 1974

The purpose of the present study is to evaluate changes of the soft tissue relative to underlying skeletal elements during orthodontic treatment, and the influence of orthodontic treatment quantitatively on various regions of the facial profile. 59 Korean young women were selected, whose Hellman dental age was IV A, IV C and V A. Lateral cephalometric head films were taken before and after orthodontic treatment. From tracings, landmarks on skeletal and soft tissue profile were located, and then their linear and angular measurements were made directly. The results were obtained as follow: 1) Soft tissues of the facial profile were closely related and dependent on the underlying dentoskeletal frameworks. Orthodontic treament resulted in the reduction of dentofacial protrusion with both upper and lower lips becoming less procumbent during treament. 2) Thickness of the upper lip increased considerably during orthodontic treatment, and this change was related to maxillary incisor retraction. The ratio between the amount of maxillary incisor retraction and that of increment of upper lip thickness was approximately 5:3. 3) Soft tissue thickness overlying Downs' point A, point B and pogonion was not modified by orthodontic treatment. 4) Holdaway's H line, relating facial profile to the underlying dentoskeletal framework, seemed to be the most practical approach to soft tissue analysis.

• Imaging Science in Dentistry
• /
• v.49 no.1
• /
• pp.35-43
• /
• 2019

Purpose: The goal of this study was to assess the accuracy and reliability of a low-cost portable scanner (Scanify) for imaging facial casts compared to a previously validated portable digital stereophotogrammetry device (Vectra H1). This in vitro study was performed using 2 facial casts obtained by recording impressions of the authors, at King's College London Academic Centre of Reconstructive Science. Materials and Methods: The casts were marked with anthropometric landmarks, then digitised using Scanify and Vectra H1. Computed tomography (CT) scans of the same casts were performed to verify the validation of Vectra H1. The 3-dimensional (3D) images acquired with each device were compared using linear measurements and 3D surface analysis software. Results: Overall, 91% of the linear Scanify measurements were within 1 mm of the corresponding reference values. The mean overall surface difference between the Scanify and Vectra images was <0.3mm. Significant differences were detected in depth measurements. Merging multiple Scanify images produced significantly greater registration error. Conclusion: Scanify is a very low-cost device that could have clinical applications for facial imaging if imaging errors could be corrected by a future software update or hardware revision.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.9
• /
• pp.1305-1311
• /
• 2022

With the recent rapid development of mobile terminals and personal computers and the advent of neural network technology, real-time face swapping using images has become possible. In particular, the cycle generative adversarial network made it possible to replace faces using uncorrelated image data. In this paper, we propose an input data processing scheme that can improve the quality of face swapping with less training data and time. The proposed scheme can improve the image quality while preserving facial structure and expression information by combining facial landmarks extracted through a pre-trained neural network with major information that affects the structure and expression of the face. Using the blind/referenceless image spatial quality evaluator (BRISQUE) score, which is one of the AI-based non-reference quality metrics, we quantitatively analyze the performance of the proposed scheme and compare it to the conventional schemes. According to the numerical results, the proposed scheme obtained BRISQUE scores improved by about 4.6% to 14.6%, compared to the conventional schemes.

• Archives of Plastic Surgery
• /
• v.35 no.3
• /
• pp.303-308
• /
• 2008

Purpose: The purpose of this study is to develop three-dimensional computerized anthropometry(3DCA) and to compare its reliability and accuracy 3DCA with manual anthropometry(MA) for measurement of lips and nasal deformities in unilateral cleft lips and palate(UCLP) patients. Methods: Samples were consisted of six UCLP patients whose facial plaster models were available immediately before and 3 months after the cleft lip surgery. MA of the facial plaster models was carried out using an electronic caliper. In 3DCA, three-dimensional auto-measuring program was used to digitize landmarks and to measure three-dimensional virtual facial models (3DVFM), which was generated with a laser scanner and 3D virtual modeling program. Intraclass correlation coefficients(ICC) were calculated to evaluate reliability and reproducibility of the variables in both methods, and Wilcoxon's signed rank test was done to investigate the difference in values of the same variables of facial models of each patient between two methods. Results: All ICC values were higher than 0.8, so both methods could be considered reliable. Although most variables showed statistical differences between two methods(p<0.05), differences between mean values were very small and could be considered not significant in clinical situation. Conclusion: In clinical situation, 3DCA can be an objective, reliable and accurate tool for evaluation of lips and nasal deformities in the cleft patients.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.48.1-48.7
• /
• 2019

Background: Soft tissue asymmetry such as lip canting or deviation of the philtrum is an important influencing factor for unbalanced facial appearance. Lip canting could be improved by the correction of the occlusal canting or positional change of the mentum. Although there are many studies about changes of lip canting, however, postoperative changes of philtrum deviation have not been yet reported. In this study, we investigate the positional change of the philtrum after orthognathic surgery and influencing factors. Methods: Positional change of the philtrum was evaluated in 41 patients with facial asymmetry who underwent bimaxillary surgery, in relation to other anatomical soft tissue landmarks using a frontal clinical photo. The surgical movement of the maxillary and mandibular dental midline and canting were measured in postero-anterior cephalogram before and 1 day after surgery. The same procedure was repeated in patients with more than 1.5 mm perioperative change of the mandibular dental midline after bimaxillary surgery. Results: Maxillary dental midline shifting and canting correction did not have a significant correlation with lateral movement of the philtrum midline. However, the mandibular shift had a statistically significant correlation with a lateral movement of the philtrum (p < 0.05) as well as other linear parameters and angle values. Conclusion: The horizontal change of the philtrum is influenced by lateral mandibular movement in patients with facial asymmetry, rather than maxillary lateral movement.

• Journal of Oral Medicine and Pain
• /
• v.26 no.2
• /
• pp.147-156
• /
• 2001

The purpose of this study was to identify the difference of vertical movement of mandible according to Angle's molar relationship and by skeletal factors affect to vertical movement of mandible. 172(age ranged from 20 to 30) subjects who go to college within territory of Kwangju city without any experience of temporomandibular disorder, extraction and orthodontic treatment. were selected for this study. The subjects were classified into class I(male:30, female:49), class II(male:18, female:24) and class III(male:18, female:33) according to Angle's molar relationship. The distance was measured between incisal edge of maxillary and mandibular central incisor and between bottom of central fossa of maxillary and mandibular 1st molar with ruler. The arch length and width were measured on the diagnostic cast. Cephalometrics were taken and then traced. Landmarks were identified and analyzed. 1. Maximal interincisal opening of male is larger than that of female in class I, class II and class III. Among each group maximal interincisal distance is the largest in class III. Maximal intermolar distance of male is superior to that of female in class I, class II, and class III, but there is no siginficant difference among them. 2. On maximal opening movement of Angle's classification class I and class II, total mandibular length, mandibular ramal length, madibular inferior border length and upper arch width were important variables and facial length, upper arch length and lower arch length had negative relationship to that. On maximal opening movement of Angle's class III, the upper arch length, the lower arch length and anterior facial length were important variables especially when compared with class I and II, and upper arch width had negative relationship. These results suggest that maximal opening movement is affected by facial morphology in all classes, but each group is affected by different facial skeletal variables. Accordingly, facioskeletal variables might be considered as diagnosis and treatment to improve the amount of mouth opening.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.11.1-11.8
• /
• 2020

Background: The purpose of this study is to compare the skeletal stability of two-jaw surgery via surgery-first approach with conventional two-jaw surgery in facial asymmetry patients by measuring the skeletal changes after surgery from a three-dimensional analysis. From January 2010 to January 2014, 40 patients with facial asymmetry who underwent two-jaw surgery in Pusan National University Hospital were included in this study. They were classified into experimental group (n = 20) who underwent two-jaw surgery via surgery-first approach and control group (n = 20) who underwent conventional two-jaw surgery. After selection of 24 landmarks and the construction of horizontal and sagittal, coronal reference planes, changes in 10 linear measurements and 2 angular measurements were compared between the surgery-first approach and conventional groups in the preoperative, immediate postoperative, and postoperative periods. The paired t test and Student t test were used for statistical analysis. The mean and standard deviation of the measurement were calculated for the experimental and control groups. Results: The statistical analysis showed that changes in skeletal measurements were similar between the surgery-first approach and conventional groups, according to each period. However, U1-SRP measurement showed statistically significant changes in surgery-first approach groups at postsurgical change (T1 to T2). Also, the mean treatment duration in the treatment group was 15.9 ± 5.48 months whereas that in the control group was 32.9 ± 14.05 months. Conclusion: In facial asymmetry patients, similar results were observed in the postoperative skeletal stability when 2-jaw surgery via surgery-first approach was compared with conventional 2-jaw surgery. However, significant lateral deviation of upper incisor midline was observed. In addition, a shorter average treatment duration was observed. To stabilize the unstable occlusion after surgery, increased wearing of the stent and proactive rubber guidance will be needed.